Dr Begori Venkatesh

Department:
Mechanical Engineering
Faculty Id:
VCE101
Designation:
Professor
Years of Experience:
19 Years
Employment Status:
Full Time – Ratified by JNTUH

Date of Birth:

02 February 1975

Areas of Specialization :

Product Design and Development, Advanced Engineering materials, CAD/CAM, CIM & Finite Element Analysis

Qualification:

Ph.D. in Mechanical Engineering 2012, Osmania University, Hyderabad,
PG Degree in M. Tech (Computer Integrated Manufacturing),2003, National Institute of Technology, Warangal,
UG Degree in B. Tech (Mechanical Engineering),1999,J.N.T.U College of Engineering, Hyderabad.

Subjects Taught:

Mechanics of solids, CAD/CAM, Machine Drawing, production Drawing, Instrumentation & Control Systems, Operations research, Robotics, Kinematics of Machinery, Dynamics of Machinery, Automation in Manufacturing, Mechanics of Fluids, Engineering Drawing, Metrology, Finite Element Method, Engineering Mechanics, Advanced Mechanisms, Gear Engineering.

Papers Published:

LIST OF PUBLICATIONS(National & International Standards)

  1. B.Venkatesh, Bharti Malvi, Manish Roy and Pallab sarkar Effect of Welding Conditions on Erosive Wear of Hard-faced Co-Based Alloy Layer Journal of Engineering Tribology, Volume 232 Issue 11, November 2018, pp. 1377–1389.
  2. B. Venkatesh, K. Sriker, T. Vijaybabu & G.Parthasarathi “Wear Behavior of Fe-Cr-V Based Hard Facing Alloy on ASTM  A105 Steel”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol – 9, Issue – 4;  Aug2019,pp.995-1004.
  3. B.Venkatesh, T.Vijaybabu, A.Seshappa, K.Sriker “Wear behavior of multilayer over mono layer of Fe-C-Cr hardfacing alloy on ASTM A 105 Steel”, International Journal of Mechanical Engineering and Technology (IJMET),Volume 8, Issue 12, December 2017, pp. 999–1006, Article ID: IJMET_08_12_108.
  4. T. Vijay Babu, B.Venkatesh, A.Seshappa, “ Optimization of wire electrical discharge machining (WEDM) processes parameters on SS 316 using Taguchi method ”, International Journal of Mechanical Engineering and Technology (IJMET),Volume 8, Issue 12, December 2017, pp. 722–727, Article ID: IJMET_08_12_077.
  5. T.Vijay Babu, B.Venkatesh, Ch. Chandra Mouli,Machining parameters optimization in wire electrical discharge machining (WEDM) of 316 L Stainless steel”, International  Journal of Mechanical Engineering and Technology (IJMET),Volume 8, Issue 12, December 2017, pp. 728–732, Article ID: IJMET_08_12_078.
  6. A.Seshappa, B.Venkatesh and T.Vijaybabu, P.Prasnna, “Optimization of significant parameter on mechanical activities of AlMg1SiCu Fusion Metal Matrix Composites with Taguchi Included Fuzzy Approach”, International Journal of Mechanical Engineering and Technology (IJMET), Volume 8, Issue 12, December 2017, pp. 1089–1095, Article ID: IJMET_08_12_118.
  7. Venkatesh, K.Sriker, S.V. Prabhakar Vattikuti, K.Deepak “Wear characteristics of hard facing alloys: State-of-the-art “Elsevier Journal of Procedia Material Science 10 (2015) 527 – 532.
  8. V. Prabhakar Vattikuti, P Saikiran Reddy,B Venkatesh “Probe-based data storage technology: Thermo-mechanical storage –state of the art “Elsevier Journal of Procedia Material Science 10 ( 2015 ) 419 – 432.
  9. K Deepak, S. V.Prabhakar Vattikuti, B Venkatesh“Experimental Investigation of Jute Fiber Reinforced Nano Clay Composite “Elsevier Journal of Procedia Material Science 10 (2015) 238 – 242.
  10. V.Prabhakar Vattikuti, ChanByonand Ch.Venkata Reddy,B.Venkatesh and Jaesool Shimi”Synthesis and structural characterization of MoS2 nanospheres and nanosheets using solvothermal method”Springer Journal of Material Science, published on line:28th April, 2015,  ISSN 0022-2461,DOI: 10.1007/s10853-015-9051-8.
  11. S.Prabhakar Vattikuti, Chan Byon, Ch.Venkata Reddy, Jaesool Shim and B.Venkatesh.,“Co-precipitation synthesis and characterization of faceted MoSNano rods with controllable morphologies” Springer Journal of Applied Physics A  Material science and processing, published on line: 17 April 2015, ISSN 0947-8396, DOI: 10.1007/s00339-015-9163-7.
  12.  Venkatesh, S.V.Prabhakar Vattikuti ,S.Devaprasad “Investigate the Combined Effect of Gear ratio, Helix angle, Face and Module on Bending and Compressive stress  of Steel alloy Helical Gear  ” Elsevier Journal of Procedia Material Science, Volume 6, 2014, Pages 1865-1870. DOI: 10.1016/j.mspro.2014.07.214
  13.  V. Prabhakar Vattikuti, B. Venkatesh “Wettability of Molten Glass on Water Based Sol-Gel Coatings” Elsevier Journal of Procedia Material Science, Volume 6, 2014, Pages 1837-1849. DOI: 10.1016/j.mspro.2014.07.214
  14. Venkatesh, S.V. Prabhakar Vattikuti and V Mahidhar Reddy “Investigate the Combined Effect of gear ratio, helix angle, face width and module on beam strength and Wear tooth load of Steel alloy Helical Gear” International Journal of Current Engineering and Technology, Pages 692-695, 2014 P-ISSN 2347 – 5161, DOI:http://dx.doi.org/10.14741/ijcet/spl.2.2014.131
  15. Venkatesh, S.V.Prabhakar Vattikuti, S.Deva Prasad,V .Kamala and A.M.K.Prasad “Parametric investigation of the combined effect of Gear parameters on Tangential Force and Dynamic Tooth Load of 40 Ni2 Cr1 Mo 28 Steel Helical Gear” International Journal of Current Engineering and Technology, Pages 687-691, 2014 P-ISSN 2347 – 5161, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.130
  16. V. Prabhakar Vattikuti and B. Venkatesh “Nano-Pyramid Structured Coatings for Demanding Tribological Applications” International Journal of Current Engineering and Technology, Pages 250-254, 2014 P-ISSN 2347 – 5161, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.45
  17. V. Prabhakar Vattikuti, B. Venkatesh and K Deepak “ Hot Embossed TiO2 Sol-Gel Wave Guide Films for Sensors Applications” International Journal of Current Engineering and Technology, Pages 190-192, 2014 P-ISSN 2347 – 5161, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.34
  18. Venkatesh, S.V.Prabhakar vattikuti V.Kamala, A.M.K.Prasad ,” Effect of compressive stress On steel alloy of helical gear for marine applications” International Journal on Mechanical Engineering and Robotics (IJMER), Volume -1, Issue -2,2013, pp.113-117. http://www.irdindia.in/Journal_IJMER/PDF/Vol1_Iss2/21.pdf
  19. Venkatesh, S.V.Prabhakar Vattikuti, D.V. Ramanareddy, S. Naresh Kunar, V.Kamala, AMK Prasad “Effect of bending stress on steel alloy of Helical Gear for High Speed applications” International Journal of Mechanical and Civil Engineering, 2013, pp 16-25. ISSN NO:  2320-334X.http://iosrjournals.org/iosr-jmce/papers/RDME-Volume6/RDME-52.pdf
  20. Venkatesh, V.Kamala, A.M.K. Prasad., “Variation Of Beam Strength Of Steel Gear For Marine Applications” International journal of Research in Engineering & Applied Sciences, Volume 2, Issue 2, 2012, pp 1494-1499. ISSN NO:  2249-3905. http://euroasiapub.org/IJREAS_Volume2_Issue2.html
  21. Venkatesh, V.Kamala, A.M.K.Prasad., “Parametric Approach to Analysis of helical gear for High Speed Marine Applications”, International journal on mechanical and automobile engineering  Volume 17, Issue 1, Aug 2011.pp 13-20.  ISSN NO:  0974-231X.http://serc.org.in/admin/pdffiles/3-VOL-17-IJMAE.pdf
  22. Venkatesh, V.Kamala, A.M.K.Prasad., “Parametric Approach to Analysis of Aluminum alloy helical gear for High Speed Marine Applications”, International journal of Modern Engineering Research, Vol.1, Issue 1, 2011, pp 173- 178. ISSN NO: 2249-6645. http:// ijmer.com/papers/Full-Issue/Vol.1_issue1.pdf
  23. Venkatesh, V.Kamala, A.M.K.Prasad., “Parametric Approach to Analysis of high Speed Helical Gear with 40 Ni2 Cr1 Mo28 Steel for Marine Applications”, International Journal of RES Engineeria, vol.1 issue 4, pp 6-10,July –Aug,2011.
  24. Venkatesh, V.Kamala, A.M.K.Prasad, “Design, Modeling & Manufacturing of helical gear,” International journal of Applied Engineering Research 2010. ISSN NO: 0976-4259. http:// ipublishing.co.in/jarvol1no12010/EIJAER1010.pdf‎
  25. Venkatesh, V.Kamala, AMKPrasad, “Modeling & Analysis of aluminum A360 alloy helical gear for Marine applications,”International Journal of Applied Engineering Research, 2010. ISSN NO:  0976-4259. http://ipublishing.co.in/jarvol1no12010/EIJAER1012.pdf
  26. Venkatesh, V.Kamala, A.M.K.Prasad, “Parametric Study of Helical Gear with Aluminum Alloy for High Speed Marine Applications,” International Journal of Engineering Research and Technology, vol 3, No.3 (2010), pp 565-578. ISSN NO: 0974-3154. http://www.irphouse.com

International /National Conferences:

International Conferences:

  1. Venkatesh, K.Sriker, M.Ashok Kumar “Wear Characteristics of Multi layer Hardfacing Alloys”, International conference on Trends in Material Science and Inventive Materials (ICTMIM 2020)” organized by JCT College of Engineering and Technology, Coimbatore, Tamilnadu, India during 9-10, April 2020.
  2.  Chandr Sekhar Rao V. Rama Krishna Prabhakar Kandukuri B. Venkatesh, “Project Based Learning through MOOCS”, Proceedings of IEEE X plore of International Conference on MOOCs, Innovation and Technology in Education (MITE) organized by Marri Laxman Reddy Institute of Technology, Hyderabad, during Nov 29-30, 2018. Page 27-30.
  3. Venkatesh, Manish Roy, “Deposition and Characterization of Multi-Layer Hard-Facing Chromium on Ferrous Substrate” 4th International Conference on Advanced Electromaterials, during Nov. 21-24, 2017 Jeju, Korea.
  4. B.Venkatesh, Bharti Malvi and Manish Roy “Influence of Processing Condition on Erosive Wear of Hardfaced Stellite Layer” Indo-Australian Symposium on Advances in Materials Engineering (AME-16) Organized by IIT Bombay,Mumbai,India during      19-20, December,2016.
  5. B.Venkatesh ,K.Sriker and SV Prabhakar Vattikuti “Wear behaviour characteristics of multilayer over monolayer of Fe-Cr-V based hardfacing alloy on ASTM A 105 Steel” International Conference on Design and Manufacturing, Organized by IIITDM Kanchipuram, Chennai, India, during 16-17,December 2016.
  6. B.Venkatesh, Bharti Malvi and Manish Roy “Elevated Temperature Erosion of Multilayer Fe-Cr Hardfaced Layer “First International Conference on Coatings, Thin Films, Multi Layer Devices & Systems-I Organized by NFTDC, Hyderabad, India during 14-16 December 2016.
  7. B.Venkatesh and Manish Roy “High Temperature Erosion of Hardfaced Stellite Layer” Fifth International Conference on Wear and Corrosion: Synergistic Effects and Road Mapping solutions for Mitigation in Industrial & Service Environment Organized by NFTDC, Hyderabad, India during 12-13 December 2016.
  8. Praveen Kumar, B.Venkatesh “Thermal Analysis on Dynamic Braking Resistor Unit” Third International Conference on Latest Concepts in Science, Technology and Management (ICLCSTM-16) Organized by the Institutions of Electronic and Telecommunication Engineers (IETE) Pune, Maharashtra, India, 7th August 2016. ISBN:978-81-932712-5-4
  9. Venkatesh and K.Sriker “Wear behavior of multilayer over single layer of Fe-C-Cr hardfacing alloy on ASTM A 105 steel” International Conference on Advanced Materials and Applications (ICAMA-16) Oranized by BMS College of Engineering,  Bangalore, India, during 15-17 June, 2016.
  10. B.Venakatesh, and P.Ravitej“Property Evaluation of Superhard Alloys” International Conference on Futuristic innovations in Mechanical Engineering and Manufacturing Engineering and Manufacturing Management (ICFIMEMM-2016) Organized by Department of Mechanical Engineering, M.Kumarasamy college of Engineering, Thalavapalayam, Karur  during 30th-31st, March 2016.
  11. Vyjayanthi, B.Venkatesh “A Review on Effect of Sensitivity of Sub-Surface Fatigue Cracks During Service Stage” Proceedings of International Conference on Electrical, Electronics, Engineering Trends, Communication, Optimization and Sciences (E3COS-15),Organized by Sri Sunflower college of Engineering and Technology, Vijayawada,  Andhra Pradesh, India, 28th -30th ,March-2015 . pp 834-836.
  12. Abdul Waseem Akram, B.Venkatesh “Experimental and Structural Analysis of High Speed Helical Gear by Finite Element Method ” Proceedings of International Conference on Electrical, Electronics, Engineering Trends, Communication, Optimization and Sciences (E3COS-15), Organized by Sri Sunflower college of Engineering and Technology, Vijayawada, Andhra Pradesh, India,28 -30 ,March-2015 ,pp 1058-1063.
  13. Venkatesh, K.Sriker, SV Prabhakar Vattikuti, K.Deepak “Wear characteristics of hard facing alloys: State-of-the-art “Souvenir of 2nd International Conference on Nano-materials and Technologies (CNT-2014), 17-18th , October, 2014, pp 63.
  14. Chan Byon, S.V.Prabhakar Vattikuti, P Saikiran Reddy, B Venkatesh “Probe-based data storage technology: Thermomechanical storage –state of the art ““Souvenir of 2nd International Conference on Nano-materials and Technologies (CNT- 2014), 17-18th, October, 2014, pp 35.
  15. K Deepak, , S. V. Prabhakar Vattikutia, B Venkatesh  “Experimental Investigation of Jute Fiber Reinforced Nano Clay Composite “Souvenir of 2nd International Conference on Nano-materials and Technologies  (CNT-2014),17-18th , October,2014, pp 62.
  16. Venkatesh, S.V. Prabhakar Vattikuti and V Mahidhar Reddy “Investigate the Combined Effect of gear ratio, helix angle, face width and module on beam strength and Wear tooth load of Steel alloy Helical Gear” Proceedings of International conference on advances in mechanical Sciences (icams2014), 9 – 11 January, 2014, pp 655-658.
  17. Venkatesh, S.V.Prabhakar Vattikuti, S.Deva Prasad,V .Kamala and A.M.K.Prasad “Parametric investigation of the combined effect of Gear parameters on Tangential Force and Dynamic Tooth Load of 40 Ni2 Cr1 Mo 28 Steel Helical Gear” Proceedings of International conference on advances in mechanical Sciences (icams2014), 9 – 11 January, 2014, pp 650-655.
  18. V.Prabhakar Vattikuti, B.Venkatesh “Nanostructured Coatings for Demanding Tribological Applications”, Proceedings of International conference on advances in mechanical Sciences (icams2014), 9 – 11 January, 2014, pp 208-212.
  19. V.Prabhakar Vattikuti, B.Venkatesh “Hot Embossed TiO2 Sol-Gel Wave Guide Films for Sensors Applications”, Proceedings of International conference on advances in mechanical Sciences (icams2014), 9 – 11 January, 2014, pp 188-190.
  20. Venkatesh, S.V.Prabhakar vattikuti V.Kamala, A.M.K.Prasad,” Effect of compressive stress On steel alloy of helical gear for marine applications” 4th International Conference on Mechanical and Industrial Engineering (ICMIE-13) Organized by Institute for research and    Development in India, Pune, India, 30 June, 2013.
  21. Venkatesh, V.Kamala, A.M.K.Prasad; “Variation of dynamic tooth load of helical gear for marine applications”, IEEE International Conference on Research and development prospects on Engineering and technology (ICRDPET 2013) Organised by E.G.S.Pillay Engg. College, Nagapattinam, Tamilnadu, India, 29-30 March, 2013.
  22. L.Uday Kiran, B.Venkatesh, G.Chandramohan Reddy and A.M.K Prasad; “Effect of Current on Surface roughness Parameters and MRR in Sink EDM Process ”, International conference on Advancements in Engineering and Management, Organised by Royal Institute of Technology & Science, Hyderabad, India, 27-28 Feb, 2013.
  23. Venkatesh, V.Kamala, A.M.K.Prasad; “Variation of wear strength of tooth of steel gear for high speed applications”, Proceedings of International Conference on Advances in Material Processing and Characterisation (AMPC 2013), Organised by Department of Mechanical Engineering, University College of Engineering, Anna University, Tamilnadu, India. 06-08 Feb, 2013, pp. 901-904.
  24. Venkatesh, V.Kamala, A.M.K.Prasad; “Variation of beam strength of Aluminum alloy gear for Marine applications”, Proceedings of International Conference on Material Processing and Characterization (ICMPC 2012), Organised by Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad, India, 08-10 March, 2012, pp.404-408.
  25. Venkatesh, V.Kamala, A.M.K. Prasad., “Variation Of Beam Strength Of Steel Gear For Marine Applications” Souvenir of International Conference on Competitiveness & Innovativeness in Engineering, Management & Information Technology (ICCIEMI-12), Organized by Euro Asia Research and development Association, Haryana,  29  Jan 2012, pp. 101.
  26. Venkatesh, V.Kamala, A.M.K.Prasad; “Gear box design for open architecture vertical articulated robot” Proceedings of International Conference on Recent Trends in Materials and Mechanical Engineering (ICMME 2008), Organised by Dr.Mahalingam College of Engineering & Technology, Pollachi, Tamilnadu, India, 18-20 December 2008.
  27. Venkatesh,  V.Kamala,  A.M.K.Prasad  Computer aided analysis of high speed helical gear” Proceedings of International conference on Emerging Research and Advances in Mechanical Engineering (ERA-09), Organised by Velammal Engineering College , Chennai,   Tamilnadu, India, 19-21st March, 2009.

National Conferences:

  1. Sriker,B.Venkatesh,Md.Abdul Waseem Akram, K.deepak “Temperature dependent wear behavoiur characteristics of hardfacing alloys” Abstracts of APAS – Golden Jubilee Science Congress, November 13-15, 2014, pp 38.
  2. Abdul Waseem Akram, B.Venkatesh, K.Sriker. “Structural and Vibrational analysis of high speed helical gear by using 3D Finite element method” Abstracts of APAS – Golden Jubilee Science Congress, November 13-15, 2014, pp 156.
  3. Venkatesh, V.Kamala, A.M.K.Prasad “Parametric study for high speed helical gear for Marine applications” Proceedings of National Conference on Mechanical Engineering Emerging Trends, Organized by Vardhaman College of Engineering, Hyderabad, India, 6- 7 August,2010, pp.123-132.
  4. Venkatesh, V.Kamala, A.M.K.Prasad “Design and Computer aided analysis of high speed helical gear” Proceedings of National conference on recent innovations in Technology,Organised by Rajiv Gandhi institute of  Technology(Govt.Engineering College), Kottayam, India,4 – 6th March, 2010.
  5. Venkatesh, V.Kamala, A.M.K.Prasad “Design of Gear box for Thread rolling Machine” Proceedings of National Conference on Advances in Mechanical Engineering 2009 (AME 2009), Organised by Vidya Vikas Institute of Engineering and  Technology, Mysore, India, 5 October, 2009.
  6. Venkatesh, AMK Prasad, V.Kamala;“Performance evaluation of 5-axis, Jointed, arm type, open articulated robot” Proceedings of National conference on Advances in Mechanical Engineering– 2008 (AIM Engineering-2008), Organised by Manipal Institute of Technology, Manipal, Karnataka, India, 28-30th October, 2008.
  7. Venkatesh, V.Kamala, G.Srihari; “Analysis of open architecture vertical articulated robot” Proceedings of National Conference on State of the art of Technologies in Mechanical Engineering (NCSAME–2006), Organized by JNTU College of Engineering Hyderabad, India, 5,6th May, 2006.

Workshops, FDP’S and Conferences Organized:

  1. Conducted “One week workshop on Mechanical Engineering: Computational Approach through MATLab”,7th-12th Nov 2016, Vardhaman College of Engineering, Hyderabad.
  2. Conducted a three day international conference on Advances in Mechanical Sciences (ICAMS 2014), Organized by Department of Mechanical Engineering, Vardhaman College of Engineering, Hyderabad on 9 – 11 January, 2014.
  3. Organized a Two day International workshop on Advances in Thermal Power Generations organized by Department of Mechanical Engineering, Vardhaman College of Engineering, Hyderabad on 27-28th December, 2013.
  4. Acted as Organizing Secretary for A Two day National Conference on Mechanical Engineering Emerging Trends 2010 (MEET-10) Organized by Department of Mechanical Engineering, Vardhaman College of Engineering, Hyderabad on 6- 7 August,2010.
  5. Acted as a Coordinator for A one day National Workshop on ROBOTICS -10 organized by Department of Mechanical Engineering, Vardhaman College of Engineering, Hyderabad on 20th March, 2010.
  6. Actively Conducted a one week Faculty Development Program on “Autodesk Inventoor”,4th – 8th July 2017, Vardhaman College of Engineering, Hyderabad.
  7. Actively Conducted a one week Faculty Development Program on “Materials and Design – An Engineering Challenge”,13th – 17th June 2016, Vardhaman College of Engineering, Hyderabad.
  8. Actively Conducted a one week Staff Development Program on Methods of Teaching in Engineering Lab-2015 (MOTEL-15) during 14th – 19th December 2015) Organized by Department of Mechanical Engineering. Vardhaman College of Engineering, Hyderabad.
  9. Actively Conducted a one week Faculty Development Program on Finite Element Modeling in Engineering Applications-2015 (FEMEA-15) during 14th – 19th December 2015) Organized by Department of Mechanical Engineering. Vardhaman College of Engineering, Hyderabad.
  10. Actively Conducted a one week Faculty Development Program on Advances in Mechanical Engineering Sciences and Emerging Trends (11th – 19th December 2014) Organized by Department of Mechanical Engineering. Vardhaman College of Engineering, Hyderabad.
  11. Actively Conducted a 10 days Faculty Development Program on Applications of CFD in Engineering Problems (11/06/2013 to 19/06/2013) Organized by Department of Mechanical Engineering. Vardhaman College of Engineering, Hyderabad.
  12. Actively Conducted a 10 days Faculty Development Program on MAT Lab for Mechanical Engineers (17/06/2013 to 26/06/2013) Organized by Department of Mechanical Engineering. Vardhaman College of Engineering, Hyderabad.

Books Published:

  1. Parametric Approach to Computer Aided Analysis of High speed, High Quality Gears, Venkatesh, SV Prabhakar Vattikuti, Lap Lambert Academic Publishing,  Germany; ISBN: 978-3-659-39888-9, 2013.
  1. Wettability of Water Based Sol-Gel Coatings for optical Glass Preforms-Solutions for Glass Sticking Problems, SV Prabhakar Vattikuti , Kung Jeng Ma, Venkatesh, Lap Lambert Academic  Publishing,  Germany; ISBN: 978-3-659-39057-9, 2013.

Research Projects Undertaken:

Completed Projects:

1.04/16 – 03/17: Department of Science & Technology (DST)-SERB: Characterization of Multi-Layer

Hardfacing on Ferrous Alloys.

Ongoing Projects:

  1. Aeronautical Research Development Board (ARDB) : Experimental Investigations on Nitriding of NiL Steel for Aerospace Bearing Applications , Sanction Order: ARDB/01/2031957/M/I

Patents:

S.No Title of Patent Application  Number Status/Granted
1 Apparatus and Method for Detecting the Clogging of a Fuel Filter 201741041935 Published
2 In Air Steam Protein, Vitamin Abstraction System 201821042806 Published
3 Automatic Tire Air Filed And Air Pressure Display System 201821049322 Published