Dr K V P Chakradhar

Department:
Mechanical Engineering
Faculty Id:
VCE1225
Designation:
Professor
Years of Experience:
15
Employment Status:
Full Time – Ratified by JNTUH

Date Of Birth

19 January , 1974

Qualification

Ph.D in Mechanical 2013 ,Andhra University
PG Degree in Industrial Engineering,2002, Kumaraguru College of Technology
UG Degree in Mechanical,1996,PSG College of Technology

Areas of Specialization:

Industrial Engineering, Production Engineering and Materials

Subjects Teach:

Production Techniques, Operation Research, Engineering Metrology, CAD/CAM, TQM, Manufacturing Systems Simulation, Engineering Graphics

Research

  1. M.Tech Students Guided: 3

Publications:

International Journals:

  1. K.V.P. Chakradhar et al. Montmorillonite clay addition to epoxy/unsaturated polyester blended composites: Effect on thermal and chemical properties. Journal of Polymer Science and Technology, ISSN: 2550-1917, 6(1):29-35, 2021.
  2. V.P. Chakradhar et al. Evaluation of tensile strength in riveted, adhesive and hybrid joints. IOP Conference Series: Material Science and Engineering, 998(2020) 012042, 1-6, 2020. doi:10.1088/issn.1757-899X. SCOPUS INDEXED.
  3. K.V.P. Chakradhar Materials for High Temperature Heat Exchanger Applications: A Review. Research Journal of Engineering and Technology, ISSN: 0976-2973, 11(3), 125-132, Sept. 2020. doi: 10.5958/2321-581X.2020.00022.7 INDIAN CITATION INDEXED.
  4. K.V.P. Chakradhar etal. Development of A Multi Purpose Automated Farm Equipment. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), ISSN: 2249-6890, 10(3), 10515–10522, Sept. 2020..
  5. K.V.P. Chakradhar etal. Optimization Parameters on 7075 Aluminium Alloy using Taguchi and ANOVA for Surface Roughness. International Journal of Recent Technology and Engineering, ISSN: 2277-3878, 8(5), Jan. 2020. UGC approved. SCOPUS INDEXED.
  6. KV.P. Chakradhar etal. Development of Optimum Combination of MMT Clay Reinforced Composite. International Journal of Recent Technology And Engineering, ISSN: 2277-3878, 8(3), Sept. 2019.                                 UGC approved. SCOPUS INDEXED.
  7. K.V.P. Chakradhar etal. The Development of Hybrid Aluminium-Diamond-Hexagonal Boron Nitride Metal Matrix Composites for Heat Sink Applications. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), ISSN: 2249-6890, 9(1), 575-584, Jan 2019. SCOPUS INDEXED.
  8. K.V.P. Chakradhar etal. Experimental Investigation To Determine The Effect Of HHO Booster On The Performance Of A Two Wheeler. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), ISSN: 2249-6890, 8(2), 441-450, Apr 2018. SCOPUS INDEXED.
  9. K.V.P. Chakradhar, Damping and Thermal Properties Analysis of Montmorillonite (MMT) Clay Reinforced Polymers Blend System. International Journal for Research in Applied Science & Engineering Technology,  ISSN: 2321-9653, 5(11), 2538-2544, November 2017. UGC approved.
  10. K.V.P. Chakradhar, etal. Optimization Of Process Parameters For HCHRCR In CNC Turning Machine Using Taguchi Method. International Journal of Engineering Sciences & Research Technology, ISSN: 2277-9655, 9-17, October 2017.
  11. K.V.P. Chakradhar, etal. Optimization of turning process parameters of Al 6061/Si3N4 MMC using GA. ElixirMechanical Engineering, ISSN: 2229-712X, 84, 34007-34012, July 2015. INDEX COPERNICUS VALUE: 74.39.
  12. K.V.P. Chakradhar, etal. Effect of Clay on Chemical and Mechanical Properties of Blended Nanocomposites. Elixir Mechanical Engineering, ISSN: 2229-712X, 57A (2013) 14448-14451, April 2013. INDEX COPERNICUS VALUE: 74.39.
  13. K.V.P. Chakradhar, etal. Die Designing and Molten Metal Flow Analysis for Parking Brake Piston. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), ISSN: 2249-6890, Vol. 3, Issue 3, 99-108, Aug. 2013. Impact Factor: 5.3403. CITED BY 1.
  14. K.V.P. Chakradhar, etal. Optimization Studies on Mechanical Properties of MMT clay filled Epoxy/polyester Nanocomposite. Malaysian Polymer Journal, ISSN: 1823-7789, Vol. 8, No. 2, 34-40, Sept. 2013. UGC approved.
  15. K.V.P. Chakradhar, etal. Tensile and Thermal Parameters of Natural Fibers and Polymer Coatings: Effect on Sourghum Vulgaris Stalks. Journal of Polymer Materials, ISSN 2008-8868, Vol. 29, No. 1, 71-75, March 2012. SCOPUS INDEXED. UGC approved. CITED BY 1.
  16. K.V.P. Chakradhar, etal. Blended Epoxy/Polyester Nanocomposite: Effect of Nano on Mechanical properties. Polymer-Plastics Technology and Engineering, ISSN: 1525-6111, 51, 92–96, Jan. 2012. Impact Factor: 1.481; SCOPUS INDEXED. CITED BY 19.
  17. K.V.P. Chakradhar, etal. Mechanical properties of randomly oriented short Sansevieria trifasciata fibre/epoxy composites, International Journal of Fiber and Textile Research, 1(1): 6-10, July 2011. CITED BY 13.
  18. K.V.P. Chakradhar, etal. Thermal analysis of Epoxy/Polyester Blend filled with Montmorillonite Clay – Nanocomposite. International Journal of Engineering Research and Industrial Applications, ISSN 0974-1518, Vol.4, No. 3, 123-132, Aug. 2011. CITED BY 2.
  19. K.V.P. Chakradhar, etal. Hydrophilic fumed silica/clay nanocomposites: Effect of silica/clay on performance.International Journal of Nanomaterials and Biostructures, ISSN 2277 –3851, 1(1): 1-11, June 2011. CITED BY 8.
  20. K.V.P. Chakradhar, etal. Tensile & flexural properties of sisal/glass fibre reinforced hybrid composite. International Journal of Macromolecular Science, 1(1):19-22, 2011. CITED BY 21.
  21. K.V.P. Chakradhar, etal., Performance of Zea mays fiber reinforced epoxy composites. International Journal of Fiber and Textile Research, 1(1): 22-27, August 2011. CITED BY 10.
  22. KVP Chakradhar, etal. Fabrication and Performance of Hybrid Betel Nut (Areca Catechu) Short Fiber/Sansevieria Cylindrica (Agaveceae) Epoxy Composites. International journal of materials and biomaterials applications, 1(1): 6-13, 2011. CITED BY
  23. K.V.P. Chakradhar, etal. Epoxy/Polyester Blend Nanocomposite: Effect of Nanoclay on Mechanical, Thermal and Morphology properties. Malaysian Polymer Journal, ISSN: 1823-7789, 6(2), 109-118, Dec. 2011. UGC approved. CITED BY 37.

International Conferences:

  1. 3rd International Congress on Advances in Mechanical Sciences (ICAMS 2020), Vardhaman College of Engineering, Hyderabad, 27-28 August 2020.
  2. Fifth International Conference on Transformations in Engineering Education (ICTIEE)-IUCEE, Thiagarajar College of Engineering, Madurai, 8th and 9th January
  3. 1st International Conference and 18th National ISME Conference on Mechanical Engineering: Enabling Sustainable Development (ISME-2017), NIT Warangal, 23-25 February
  4. International Conference on Enabling ‘Make In India’, BV Bhoomaraddi College of Engineering & Technology, Hubbali, India, 6-8 Jan.
  5. 26th Indian Engineering Congress, IEI, Bangalore, India, 15-18 Dec.
  6. International Conference on Emerging Research and Advances in Mechanical Engineering (ERA), Velammal Institute of Technology, Chennai, India,
  7. International Conference on Information Science Technology and Management, Osmania University, Hyderabad, India,

Workshops, FDP’S and Conferences Organized:

  1. Organized One Week Faculty Development Program on “Product Design Engineering using Fusion 360” in association with ICT Academy, Department of Mechanical Engineering, Vardhaman College of Engineering during 29th April – 3rd May 2019.
  2. Organized a guest lecture on “Quality Control and Certification of Aerospace Composites” was organized on 20-09-2018; Resource Person: Lokesh Srivastava, Scientist ‘E’, ASL, DRDO, Hyderabad at Vardhaman College of Engineering.
  3. Organized National Level Students Technical Symposium, PRAZASTI’18 organized at Department of Mechanical Engineering on 10TH MARCH 2018, Sphoorthy Engg, College,
  4. Organized a guest lecture on “Development of Advanced Composites for Aerospace Applications” Department of Mechanical Engineering, Sphoorthy Engg, College, Hyderabad, was organized on 3-3-2018; Resource Person: N. Kishore Nath, Scientist ‘F’, DRDO, Hyderabad.
  5. Organized a guest lecture on “Industrial Management” was organized on 8-3-2017; Speaker: M. Satya Prasad, Advisor (Quality & Training), Annapurna & Bhaskari Group, Hyderabad.
  6. Organized a Two Day Staff Development Program on CNC Programming, 16th – 17th September 2016, organized by Department of Mechanical Engineering under TEQIP-II at Madanapalle Institute of Technology & Science,
  7. Organized a National Level Students Technical Symposium, MECHONANCE ’16 organized by Department of Mechanical Engineering on 2nd April 2016 at Madanapalle Institute of Technology & Science,

WORKSHOPS ATTENDED:

  1. One Week Faculty Development Program on “Recent Trends in Manufacturing”, MGIT, Hyderabad during 28th July – 1st August 2020.
  2. Webinar on “New Product Development and Life Cycle Management” organized by Dr. Mahalingam College of Engineering & Technology, Pollachi, TN on 23-06-2020. Speaker: Ganesh Rajkumar, Technical Manager, Altron India, Coimbatore.
  3. One Week Faculty Development Program on “Disruptive Technologies in Mechanical Engineering”, Department of Mechanical Engineering, Sreenidhi Institute of Science & Technology, Hyderabad during 8th June – 13th June 2020.
  4. One Week Faculty Development Program on “Research Among Youth (RAY 2020)”, Department of Mechanical Engineering, Vardhaman College of Engineering during 28th May – 3rd June 2020.
  5. Faculty Development Program on “Blended Learning”, organized by TASK, Telangana, during 20th May – 23rd May 2020.
  6. Webinar on “Desiccant based dehumidification & cooling system” organized by Sreenidhi Institute of Science & Technology, Hyderabad on 19-05-2020. Speaker: D.B. Jani, Assoc. Prof., Govt. Engineering College, Dahod.
  7. One Week Faculty Development Program on “Product Design Engineering using Fusion 360” in association with ICT Academy, Department of Mechanical Engineering, Vardhaman College of Engineering during 29th April – 3rd May 2019.
  8. One Week FDP on “Design of Experiments using Taguchi Approach”, Department of Mechanical Engineering,

TKR College of Engineering, Hyderabad, 12th to 17th November 2018.

  1. Workshop on Cyber Security, Kenes Exhibitions, Novotel, Hyderabad, 14th and 15th December 2017.
  2. Workshop on “Training program on NBA criteria and Accreditation process” organized by JNTU, Anantapuramu and sponsored by UGC, 3rd March
  3. Workshop on “ABET Accreditation Essentials and preparing for Accreditation” organized by MITS, Madanapalle, 24th February
  4. Workshop on “Outcome Based Learning” organized by BITS Pilani, Hyderabad Campus, 6th to 8th February
  5. Workshop on “Certification in Quality Management System, Auditing and Team leading” organized by American Quality Assessors (India) Private Ltd., Hyderabad, 07 to 11 2013.
  6. Workshop on “Service Science” organized by Industrial Engineering and Management Department, IIT Kharagpur, 8th July to 12th July
  7. Workshop on “Six Sigma and its Applications” organized by Department of Mechanical Engineering, Pulla Reddy Engineering College, Kurnool, AP, 8th Dec. 2012.
  8. Workshop on “Mathematical Methods in Science and Technology” organized by Department of Mechanical Engineering, G. Pulla Reddy Engineering College, Kurnool, AP, 19th 2009.
  9. Workshop on “Latest Trends in Computer Aided Manufacturing” organized by Department of Mechanical Engineering, G. Pulla Reddy Engineering College, Kurnool, AP, 19th-20th 2008.
  10. Workshop on “Applications on CAD/CAE/CAM and IT in Product Development and Discrete Manufacturing” organized by PSG College of Technology, Coimbatore, Tamilnadu, 6th -19th 2005.

CONFERENCES ATTENDED:

  1. Fifth International Conference on Transformations in Engineering Education (ICTIEE)-IUCEE, Thiagarajar College of Engineering, Madurai, 8th and 9th January 2018.
  2. 1st International Conference and 18th National ISME Conference on Mechanical Engineering: Enabling Sustainable Development (ISME-2017), NIT Warangal, 23-25 February 2017.
  3. International Conference on Enabling ‘Make In India’, BV Bhoomaraddi College of Engineering & Technology, Hubbali, India, 6-8 Jan. 2016.
  4. 26th Indian Engineering Congress, IEI, Bangalore, India, 15-18 Dec. 2011.
  5. International Conference on Emerging Research and Advances in Mechanical Engineering (ERA), Velammal Institute of Technology, Chennai, India, 2009.
  6. International Conference on Information Science Technology and Management, Osmania University, Hyderabad, India, 2007.

WORKSHOPS/ SEMINARS/GUEST LECTURES CONDUCTED (as Program Coordinator):

  1. A National Level Students Technical Symposium, PRAZASTI’18 organized by Department of Mechanical Engineering on 10TH MARCH 2018 at Sphoorthy Engg, College, Hyderabad.
  2. A guest lecture on “Development of Advanced Composites for Aerospace Applications” was organized on 3-3-2018; Resource Person: Dr. N. Kishore Nath, Scientist ‘F’, DRDO, Hyderabad.
  3. A guest lecture on “Industrial Management” was organized on 8-3-2017; Speaker: Mr. M. Satya Prasad, Advisor (Quality & Training), Annapurna & Bhaskari Group, Hyderabad.
  4. A Two Day Staff Development Program on CNC Programming, 16th – 17th September 2016, organized by Department of Mechanical Engineering under TEQIP-II at Madanapalle Institute of Technology & Science, Madanapalle.
  5. A National Level Students Technical Symposium, MECHONANCE ’16 organized by Department of Mechanical Engineering on 2nd April 2016 at Madanapalle Institute of Technology & Science, Madanapalle.

Books Published:

  1. Published a chapter in the book “Research Trends In Multidisciplinary Research”. 4th chapter, Vol. 28, 63-75, Akinik Publications, 2021. ISBN: 978-93-91216-52-8.
  2. Published a chapter in the book “Mechanical Engineering for Sustainable Development: state-of-the-art research”. 15th chapter, Vol.1, pp.173-184, Apple Academic Press / Taylor and Francis Publications, 2019. ISBN: 978-1-351-17016-1.

Research Projects Undertaken:

 Completed TEQIP-II funded project “Development of Aluminium-Diamond composite for Heat    Sink” at MITS, Madanapalle, during July – Dec 2016, with a seed grant of Rs. 50,000/-

Patents:

  1. Application No: 202141010839; Publication Date: 19-03-2021; Title: Modular Clamping Device.
  2. Application No: 202141016929; Publication Date: 16-04-2021; Title: A Storage Container with Movable Bottom Closure.