Dr N Karuppiah

Department:
Electrical and Electronics Engineering
Faculty Id:
VCE1172
Designation:
Professor
Years of Teaching Experience:
18.5
Employment Status:
Full Time – Ratified by JNTUH
Phone:

9751833346

Date of Birth:

12 June 1978

Qualification:

Ph.D. in Power Electronics and Drives 2016, Anna University,
PG Degree in Power Electronics and Drives,2008, Anna University,
UG Degree in BE,1999, Madurai Kamaraj University.

Subjects Taught:

  1. Basics of Electrical & Electronics Engineering
  2. Electrical Circuit Theory
  3. Electronic Devices and Circuits
  4. Digital Electronics
  5. Linear Integrated Circuits and Applications
  6. Measurements and Instrumentation
  7. Transmission and Distribution
  8. Electrical Drives and Control
  9. Power Electronics
  10. Microprocessors and Microcontroller
  11. Special Electrical Machines
  12. Electrical Machines I
  13. Electrical Machines II
  14. Solid State Drives
  15. Protection and Switchgear
  16. Power System Operation and control
  17. Energy Auditing and Management
  18. Modeling and Analysis of Electrical Machines
  19. Solid State DC drives
  20. Power System operation and control
  21. Advanced Power System Protection
  22. HVDC Transmission
  23. Flexible AC Transmission Systems

Journal Publications:

  1. Ravindran, S. Senthil Kumar, N. Karuppiah, and M. Asokan, “Experimental Investigation on Room Temperature Vulcanised Silicone rubber and Epoxy resin coated porcelain outdoor insulators located at highly polluted environment”, Journal of Ceramic Processing Research, vol. 21, no. 1, pp.14-20, 2020. [SCI Indexed]
  2. Rajagopal Reddy, N. Karuppiah, Dubbaka Vinay Kumar Goud, Samudrala Prashant Ganesh, “Adaptive NMPC controller for two link planar Manipulator with parameter estimator”, S. C. Satapathy et al. (Eds.): ICETE 2019, LAIS 4, pp. 520–527, 2020. https://doi.org/10.1007/978-3-030-24318-0_61 [Scopus Indexed]
  3.  Murugaperumal Krishnamoorthy, P. Ajay D Vimal raj, S. Suresh, Karuppiah Natarajan, “Techno Economic Analysis of Hybrid Renewable Electrification System in different climatic Zones”, T. Hitendra Sarma et al. (eds.), Emerging Trends in Electrical, Communications, and Information Technologies, Lecture Notes in Electrical Engineering 569, 2020. https://doi.org/10.1007/978-981-13-8942-9_14[Scopus Indexed]
  4. Muthubalaji, N. Karuppiah, R. Anand, “Performance Improvement of Distribution System by Optimal Placement and Sizing of Distributed Energy Storage Systems and DGS Using Particle Swarm Optimization Algorithm, Journal of Advanced Research in Dynamical & Control systems, vol. 10, special issue 14, pp. 864-871, 2018. [Scopus Indexed]
  5. Anand, S. Muthubalaji, N. Karuppiah, G. Devadasu, “Performance Enhancement Analysis of 7 level symmetric multi-level inverter with multi career pulse width modulation”, Journal of Advanced Research in Dynamical & Control systems, vol. 10, special issue 14, pp. 856-863, 2018. [Scopus Indexed]
  6. Tamilselvi, N. Karuppiah, S. Muthubalaji, “Design of an efficient battery model using Evolutionary Algorithms”, Periodicals of Engineering and Natural Sciences, vol. 6, no. 2, pp. 265-282, 2018. [Scopus Indexed]
  7. Muthubalaji, R. Anand, N. Karuppiah, “An Integrated Optimization approach to locate the DSTATCOM in power distribution system to reduce the power loss and total cost”, Periodicals of Engineering and Natural Sciences, vol. 6, no. 2, pp. 283-294, 2018. [Scopus Indexed]
  8. Shanmugapriyan, N. Karuppiah, S. Muthubalaji, S. Tamilselvi, “Optimum placement of multi type DG units for loss reduction in a radial distribution system considering the distributed generation suitability index using evolutionary algorithms”, Bulletin of the Polish Academy of Sciences Technical Sciences, vol. 66, no. 3, pp. 345-354, 2018. [SCI Indexed]
  9. Prakash N B, Karuppiah N, Vishnu Kumar V, Vishnu R M, Zainy Mohammed Yousuf,“Load Frequency Control of Three Area System using FOPID controller”, WSEAS Transactions on Computer Research, vol. 6, pp. 36-42, 2018.
  10. Karuppiah Natarajan, Muthubalaji Sankaramoorthy, Anand Rajkumar, “Controlling the Power Loss in Radial Distribution Network by Optimally placing UPQC through reconfiguration using Evolutionary Algorithms”, International Journal of Pure and Applied Mathematics, Vol. 118, no. 16, pp. 161-179, 2018.
  11. Karuppiah, S. Muthubalaji, S. Ravivarman, Md. Asif, Abhishek Mandal, “Enhancing the Performance of Transmission lines by FACTS devices using GSA and BFOA algorithms”, International Journal of Engineering & Technology (UAE),7 (4.6), pp. 203-208, 2018. [Scopus Indexed]
  12. Karuppiah, S. Senthil Kumar, S. Ravivarman, P. Joel Joshuva, A. Prabhu, R. Arun Kumar, “Wastage Pay Smart Bin”,International Journal of Engineering & Technology (UAE),7 (4.6), pp. 193-197, 2018. [Scopus Indexed]
  13. Jaiganesh K, Karuppiah N, Ravivarman S, Md Asif, “Performance study of MATLAB modeled PV panel and conventional PV panel interfaced with LabVIEW”, International Journal of Engineering & Technology (UAE), 7 (2.17), pp. 70-73, 2018. [Scopus Indexed]
  14. Karuppiah, V. Malathi, “Damping of Power System Oscillations by tuning of PSS and SVC using Particle Swarm Optimization”, Tehnicki Vjesnik – Technical Gazette, vol. 23, no. 1, pp. 221-227, 2016. [SCI Indexed]
  15. Karuppiah, V. Malathi, A. Arumugam “Congestion Management and Voltage Stability Enhancement Using Rescheduling with FACTS Devices”, International Journal of Applied Engineering Research, Vol. 10, No. 49, pp. 340-345, 2015. [Scopus Indexed]
  16. Karuppiah, V. Malathi, S. Priya Devi, “Optimal Placement and Sizing of Multi type FACTS devices in Deregulated environment for ATC Enhancement using Gravitational Search Algorithm”, International Journal of Applied Engineering Research, Vol. 10, No. 5, pp. 4404-4409, 2015. [Scopus Indexed]
  17. Karuppiah, V. Malathi, “An Integrated Approach for Optimal Placement of STATCOM using EPSO with Fuzzy-GA for voltage regulation,”E D N Magazine, pp. 1 – 19, 2015.
  18. N. Karuppiah, V. Malathi, G. Selvalakshmi, “Optimal Placement and Sizing of Multi type FACTS devices using PSO and HSA”, B.K. Panigrahi et al. (Eds.): SEMCCO, 2014, LNCS 8947, pp. 292–303, 2015, DOI: 10.1007/978-3-319-20294-5_26. [Scopus Indexed]
  19. Karuppiah, V. Malathi, G. Selvalakshmi, “Transient Stability Enhancement Using Fuzzy Controlled SVC and STATCOM”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Special Issue 3, pp. 397- 404, March 2014.

International Conferences:

  1. Tamilselvi S, Karuppiah N, Rajagopal Reddy B, “Capacity Fade Modeling of Li-Ion battery using Evolutionary Algorithm”, E3S web of conferences, 87, 01026, SeFet, 2019. https://doi.org/10.1051/e3sconf/20198701026 [Scopus Indexed]
  2.  Ravivarman Shanmugasundaram, Natarajan Karuppiah, Rajagopal Reddy B, “Non isolated Modified Quadratic Boost converter with midpoint output for solar photovoltaic applications”, E3S web of conferences, 87, 01025, SeFet, 2019. https://doi.org/10.1051/e3sconf/20198701025 [Scopus Indexed]
  3. Muthubalaji, M. Abdul Kareem, N. Karuppiah, M. G. Sugirtha, “An Enhanced Analysis of two diode model PV module under various weather conditions”, at the International Conference on Circuits and Systems held at Mar Baselios college of Engineering, Thiruvananthapuram, Kerala, 20-21, December 2017. (published in IEEE Explore) [Scopus Indexed]
  4. Sugirtha M G, Latha P, Karuppiah N, Shanmugapriyan J, “Analysis of Optimal Voltage Stability in Power Systems with Wind Power”, at the International Conference on Computing Methodologies and Communication (ICCMC 2017) held at Surya Engineering College, Erode, 18-19, July 2017. (published in IEEE Explore) [Scopus Indexed]
  5. G. Sugirtha, N. Karuppiah, P. Latha, Jinu Vijay, “Optimal Placement and Sizing of DSTATCOM in Distribution system for Real Power Loss reduction using Cuckoo Search Algorithm”, at the International Conference on Computing Technologies (ICONCT 2017) held at Mepco Schlenk Engineering College, Sivakasi, 16-17, March 2017.
  6. Karuppiah, V. Malathi, N. S. Marimuthu, “Multi Class Support Vector Machine for Fault Classification in TCSC Compensated Transmission Line” at the International Conference on Emerging Trends in Computing (ICETIC – 2009) held at Kamaraj college of Engineering and Technology, Virudhunagar, 8-10 January 2009.

National Conferences:

  1. Presented a paper on “Reduction of Harmonics in Multicarrier PWM based Multilevel Inverter using Feed Forward Compensation Technique” at National Conference held at Kamaraj college of Engineering and Technology, Virudhunagar, 19th March 2010.
  2. Presented a paper on “A New Approach to Improve Power Factor and Reduce Harmonics in a Three Phase Bridge Rectifier Type Utility Interface” at National Conference held at Kamaraj college of Engineering and Technology, Virudhunagar, 19th March 2010.
  3. Presented a paper on “Transient Analysis and electrical energy consumption of Thyristor Switched Capacitor (TSC)” at National Level Conference held at Sethu Institute of Technology, Kariapatti, 18th April 2008.
  4. Presented a paper on “Fault Detection in a TCSC compensated transmission Line using Support Vector Machine” at National Level Conference held at Alagappa Chettiar College of Engineering and Technology, Karaikudi, 13th March 2008.

FDPs organized:

  1. Organized a one-day FDP on “Hands on Tools With MATLAB” on 6th MAY, 2014at Latha Mathavan Engineering College.
  2. Organized A One-Day Faculty Development Programme on “Optimization Techniques in Recent Research” on 19th SEP 2015at Latha Mathavan Engineering College.
  3. Organized A One-Day Faculty Development Programme on “Applications of MATLAB in Power Electronics” on 07th March 2015at Latha Mathavan Engineering College.
  4. Coordinator for five-day online FDP on“Recent Trends in Power Electronics and Energy Storage Systems”, from June 10 – June 14 at Vardhaman College of Engineering.

FDPs/STTPs/Webinars/Workshops Attended:

  1. Attended one day FDP on “New Trends on Engineering Education” at Raja College of Engineering & Technology, Madurai, 21st August 2009.
  2. Attended one day FDP on “Research Issues in Electrical Engineering”at Velammal College of Engineering & Technology, Madurai, 10th and 11th March 2011.
  3. Attended one day FDP on “Mathematical Methods for Electrical Engineers”at Velammal College of Engineering & Technology, Madurai, 1st October 2011.
  4. Attended one day FDP on “MATLAB” at Latha Mathavan Engineering College, Madurai, 4th June 2013.
  5. Attended one day FDP on “Smart Grid”at Latha Mathavan Engineering College, Madurai, 9th December 2013.
  6. Attended one day FDP on “Hands on tools with MATLAB”at Latha Mathavan Engineering College, Madurai, 6th May 2014.
  7. Attended one day FDP on “Recent Trends in Engineering Design”at Latha Mathavan Engineering College, Madurai, 15th May 2014.
  8. Attended one day FDP on “Application of MATLAB in Power Electronics”at Latha Mathavan Engineering College, Madurai, 7th March 2015.
  9. Attended one day International Seminar on “Attracting Research Funding: Opportunities & Approaches” at Hotel South Park, Thiruvananthapuram on 29.08.2016.
  10. Attended one week FDP on “Transformation from Efficient to Effective Teaching” at Vardhaman College of Engineering, Hyderabad, from 29.11.2017 to 06.12.2017.
  11. Attended one day workshop on “OrCAD Pspice” at Sethu Institute of Technology, Kariapatti, 5th March 2008.
  12. Attended one day workshop on “Teaching Methodology” at Raja College of Engineering and Technology, Madurai, 5th March 2008.
  13. Attended one day workshop on “Personality Development” at Raja College of Engineering and Technology, Madurai, 2nd February 2008
  14. Attended one day workshop on “Recent Trends in Modern Analytical Techniques and Energy Storage Devices” at Latha Mathavan Engineering College, Alagar Kovil, 27th November 2009.
  15. Attended one day workshop on “Equipment Maintenance and Servicing” at Latha Mathavan Engineering College, Madurai, 21st and 22nd December 2010.
  16. Attended one day workshop on “Effective Utilization of Computer Resources” at Latha Mathavan Engineering College, Madurai, 23rd December 2010
  17. Attended one day workshop on “Research Methodology: Objectives and Approaches” at Anna University of Technology Madurai, 30th December 2010.
  18. Attended one day workshop on “Equip Yourself” at Velammal college of Engineering and Technology, Madurai, 28th January 2010.
  19. Attended one day workshop on “Research Issues in Embedded System Design and Digital Signal Processing using FGPA”at Anna University of Technology Madurai, 12th May 2011.
  20. Attended one day workshop on “Realization of Control System concepts using MATLAB and SIMULINK” at TIFAC CORE @ VIT University, Vellore, 13th September 2013.
  21. Attended one day workshop on “Preparatory practices for Accreditation with Outcome based Education”, at National Institute of Electronics and Information Technology, Calicut on 28.05.2016.
  22. Attended two days workshop on “Statistical Applications using Excel and SPSS” at UKF College of Engineering and Technology, Kollam on 04.07.2016 and 05.07.2016.
  23. Attended two days workshop on “Energy Management & Audit” at Energy Management Centre, Thiruvananthapuram on 14.12.2016 and 15.12.2016.
  24. Attended a three days workshop on “Technology Enabled Teaching Learning Process” at National Engineering College from 27.05.2017 to 29.05.2017.
  25. Attended five days workshop on “High Impact Teaching Skills” conducted jointly by Wipro and ISTE chapter at Raja college of Engineering & Technology, Madurai held on 2nd February to 6th February 2009.
  26. Obtained “Mission 10X Learning Approach Practitioner’s Certificate” from Wipro in two days workshop at Raja College of Engineering & Technology, Madurai held on 17th and 18th March 2009.
  27.  Karuppiah, One week faculty development program on “Implementation and simulation of electrical engineering applications using PLECS Tool” organized by Electrical and Electronics Engineering Department, Vaagdevi college of Engineering, Warangal during 25th to 29th May, 2020in Association with PLEIM, Switzerland.
  28.  Karuppiah, Six days faculty development program on “Research challenges and innovations in Renewable Energy systems”, organized by EEE department of AVIT from 11th May to 16th May.
  29.  Karuppiah, Five days Online FDP on Recent Trends in Power Electronics and Energy Storage Systems” conducted by VCE, from 10.06.2020 to 14.06.2020
  30.  Karuppiah, Five Days Faculty Development Programme on “E-Content Development” from 22 June 2020 – 26 June 2020 organized by Internal Quality Assurance Cell, Angappa College of Arts and Science
  31.  Karuppiah, One Week Online Faculty Development Program on Challenges & Opportunities in Electrical Engineering ‐ A Research Perspective from 15th to 20th June – 2020, Organized by the Department of Electrical and Electronics Engineering, Bharat Institute of Engineering and Technology (BIET)
  32.  Karuppiah, “An Online Faculty Development Programme on Research Opportunities in Power Engineering (ROPE – 2020)” during 22nd – 27th April 2020 organized by the Department of Electrical & Electronics Engineering, CMR college or engineering & Technology
  33.  Karuppiah, Five-day online FDP on “Explore electrical engineering in electrical applications”, organized by department of EEE, Manakula Vinayagar Institute of Technology, Puducherry from 15.06.2020 to 19.06.2020
  34.  Karuppiah, Six Days Faculty Development program on “Recent Advances in Electrical Engineering”, organized by EEE department of BIET from 22nd June to 27th June, 2020.
  35.  Karuppiah, Five days FDP on “Emerging Technologies in Robotics”, organized by Mechanical Engineering department of Malla reddy College from 26th May to 30th May 2020.
  36.  Karuppiah, Three days FDP on “Evolutionary Optimization Techniques”, organized by EEE department of SSN College of Engineering from 15th June to 17th June 2020.
  37.  Karuppiah, Six days FDP on “Research challenges and opportunities post COVID-19”, organized by EEE Department of Vasavi Engineering College from 4th May to 9th May 2020.
  38.  Karuppiah, Three days webinar series on Coal based power generation – Future Scenario, Talk on EHV circuit breakers and Electrical Engineering in Industry, organized by EEE department of BIET from 25th June to 29th June 2020.
  39.  Karuppiah, One day Webinar on “Electronic Materials and Devices: An Overview” organized by Department of Electrical and Electronics Engineering, RVS College of Engineering and Technology, Coimbatore on 25.05.2020.
  40.  Karuppiah, Expert lecture on, “Super-capacitors – Trends and challenges”, held as a part of National level Online Seminar Series organized during 22-26, June, 2020, organized by PSG Institute of Technology and Applied Research.
  41.  Karuppiah, Expert lecture on, “Safety with Residual Current Monitoring”, held as a part of National level Online Seminar Series organized during 22-26, June, 2020, organized by PSG Institute of Technology and Applied Research.
  42.  Karuppiah, Webinar on “Scope of IoT in Industries” on 09th May 2020, organized by Department of Computer Science and Engineering, Karpaga Vinayaga College of Engineering and Technology
  43.  Karuppiah, “e-vehicles for sustainable transportation” organized by the Department of Mechanical Engineering, Geethanjali institute of science & technology on 14th May 2020
  44.  Karuppiah, webinar on Grid connected and stand-alone PV solar plant design using PVSyst organized by EETA from June 1 to June 2, 2020.
  45.  Karuppiah, webinar on “Energy Conservation and star rating” organized by EEE Department of KIT college on 15th May 2020.
  46.  Karuppiah, webinar on “Preparing writing of research proposals” by KL University on 18th May 2020.
  47.  Karuppiah, webinar on Acquiring API and submitting PBAS organized by Lokmanya University on June 24, 2020.

Books Published:

  1. Basics of Electrical Engineering, Shanlax Publications, First Edition, 2018.
  2. Microprocessor and Microcontroller, Shanlax Publications, First Edition, 2018.

Research Projects Undertaken:

None