Dr. P. Venkateshwar Reddy

Department:
Mechanical Engineering
Faculty Id:
VCE1364
Designation:
Assistant Professor
Years of Experience:
05
Employment Status:
Full Time – Ratified by JNTUH
Phone:
9959095853

Date of Birth:

14/04/1991

Areas of Specialization: Engineering Design

Qualification:

Ph.D. in Mechanical Engineering from JNTU Ananthapur

PG Degree in Engineering Design from JNTU Hyderabad

UG Degree in Mechanical Engineering from JNTU Hyderabad

Subjects Taught:

The following subjects taught to Engineering-Graduate students: Engineering Drawing, Engineering Mechanics, Finite element methods, Operations Research

Publications:

International Journals:

SCI/SCIE/ESCI Indexed Journals

  1. Reddy, P. V., Reddy, R. S., Reddy, B. V., Krishnudu, D. M., Prasad, P. R., & Rao, P. S. (2021). Enhancement of the Dynamic Mechanical and Dielectric Properties of Prosopis juliflora Fiber-Reinforced Composites by Fiber Modification. Journal of Natural Fibers, 1-17. (IF :2.6)
  2. Reddy, B. V., Kondayya, D., Goud, E. V., & Reddy, P. V. (2021). Yield criterion influence on the formability prediction of SS 304 by tensile tests and bulge tests during tube hydroforming process. Multiscale and Multidisciplinary Modeling, Experiments and Design, 1-10.
  3. Reddy, P. V., Kumar, G. S. & Kumar, V. S. (2020). Multi-response optimization in machining Inconel-625 by abrasive water jet machining process using WASPAS and MOORA. Arabian Journal for Science and Engineering. (IF : 1.7)
  4. Reddy, P. V., Reddy, R. S., Rajendra Prasad, P., Mohana Krishnudu, D., Reddy, R. M., & Rao, H. R. (2020). Evaluation of Mechanical and Wear Performances of Natural Fiber Reinforced Epoxy Composites. Journal of Natural Fibers, 1-14. (IF : 2.6)
  5. Reddy, R. S., Mohana Krishnudu, D., Rajendra Prasad, P., & Reddy, P. V. (2020). Alkali Treatment Influence on Characterization of Setaria Italic (Foxtail Millet) Fiber Reinforced Polymer Composites Using Vacuum Bagging. Journal of Natural Fibers, 1-13. (IF : 2.6)
  6. Reddy, B. M., Reddy, R. M., Reddy, B. C. M., Reddy, P. V., Rao, H. R., & Reddy, Y. M. (2020). The effect of granite powder on mechanical, structural and water absorption characteristics of alkali treated cordia dichotoma fiber reinforced polyester composite. Polymer Testing, 106782. (IF : 3.2)
  7. Reddy, B. M., Kumar, G. S., Reddy, Y. V. M., Reddy, P. V., & Reddy, B. C. M. (2020). Study on the Effect of Granite Powder Fillers in Surface-treated Cordia Dichotoma Fiber-Reinforced Epoxy Composite. Journal of Natural Fibers, 1-16. (IF : 2.6)
  8. Krishnudu, D. M., Sreeramulu, D., & Reddy, P. V. (2020). A study of filler content influence on dynamic mechanical and thermal characteristics of coir and luffa cylindrica reinforced hybrid composites. Construction and Building Materials251, 119040. (IF : 4.4)
  9. Mohana Krishnudu, D., Sreeramulu, D., Reddy, P. V., & Rajendra Prasad, P. (2020). Influence of Filler on Mechanical and Di-electric Properties of Coir and Luffa Cylindrica Fiber Reinforced Epoxy Hybrid Composites. Journal of Natural Fibers, 1-10. (IF : 2.622)
  10. Reddy, P. V., Mohana Krishnudu, D., & Rajendra Prasad, P. (2019). A Study on Alkali Treatment Influence on Prosopis Juliflora Fiber-Reinforced Epoxy Composites. Journal of Natural Fibers, 1-13. (IF : 2.6)
  11. Mohana Krishnudu, D., Sreeramulu, D., & Reddy, P. V. (2019). Alkali Treatment Effect: Mechanical, Thermal, Morphological, and Spectroscopy Studies on Abutilon Indicum Fiber-Reinforced Composites. Journal of Natural Fibers, 1-10. (IF : 2.6)
  12. Prasad, P. R., Prakash, J. N., Manjunath, L. H., & Reddy, P. V. (2020). Physical and Wear Properties of UHMWPE Fabric Reinforced Epoxy Composites. International Journal of Automotive and Mechanical Engineering17(1), 7577-7586.
  13. Reddy, P. V., Reddy, B. V., & Ramulu, P. J. (2020). Evolution of Hydroforming Technologies and its Applications-A Review. Journal of Advanced Manufacturing Systems, 19(3), 1-44.
  14. Pathapalli, V. R., Basam, V. R., & Perumalla, J. R. (2020). Effect of Annealing Temperatures on Formability of SS 304 tubes during Tube Hydroforming Process: A Numerical study. International Journal of Integrated Engineering12(1), 195-203.
  15. Reddy, P. V., Ramanjaneyulu, P., Reddy, B. V., & Rao, P. S. (2020). Simultaneous optimization of drilling responses using GRA on Al-6063/TiC composite. SN Applied Sciences, 2(3), 1-10.
  16. Reddy, P. V., Reddy, B. V., Rao, P. S., & Krishnudu, D. M. (2019). Multi Response Optimization of Turning Process by Considering its Cutting Parameters Implementing Grey Relational Analysis. International Journal of Integrated Engineering,11(8), 109-117.
  17. Reddy, P. V., Reddy, B. V., & Ramulu, P. J. (2020). Effect of heat treatment temperatures on formability of SS 304 during tube hydroforming process. SN Applied Sciences2(2), 205.
  18. Reddy, P. V., Reddy, B. V., & Ramulu, P. J. (2019). An investigation on tube hydroforming process considering the effect of frictional coefficient and corner radius. Advances in Materials and Processing Technologies, 1-20.
  19. Pathapalli, V. R., Basam, V. R., Gudimetta, S. K., & Koppula, M. R. (2019). Optimization of machining parameters using WASPAS and MOORA. World Journal of Engineering.
  20. Krishnudu, D. M., Sreeramulu, D., & Reddy, P. V. (2019). Synthesis and Characterization of Coir and Luffa Cylindrica filled with CaCo3 hybrid composites. International Journal of Integrated Engineering11(1).

Scopus Indexed Journals

  1. Reddy, P. V., Kumar, G. S., Krishnudu, D. M., & Rao, H. R. (2020). Mechanical and Wear Performances of Aluminium‑Based Metal Matrix Composites: A Review. Journal of Bio-and Tribo-Corrosion6(83), 83.
  2. Reddy, P. V., Reddy, B. V., & Ramulu, P. J. (2020). Mathematical modelling for prediction of tube hydroforming process using RSM and ANN. International Journal of Industrial and Systems Engineering35(1), 13-27.
  3. Rao, H. R., Reddy, K. M., Reddy, P. V., & Reddy, R. M. (2020). Effect of Fibre Orientation on Mechanical Properties of Hardwika Binata and Bamboo Fibre Reinforced Epoxy Composites. Materials Today: Proceedings21, 1265-1269.
  4. Reddy, P. V., Kumar, G. S., Kumar, V. S., & Reddy, B. V. (2020). Effect of Substituting SiC in Varying Proportions for TiC in Al-5052/TiC/SiC Hybrid MMC. Journal of Bio-and Tribo-Corrosion6(1), 1-11.
  5. Reddy, J. J., Varaprasad, B. J. S., & Reddy, P. V. (2020). Application of Grey Taguchi Method to optimize the internal erosion parameters of stabilized soil. Multiscale and Multidisciplinary Modeling, Experiments and Design, 1-10.
  6. Reddy, R. M., Krishnudu, D. M., Reddy, B. M., & Reddy, P. V. (2020). Effect of Alkali Treatment on Mechanical Properties of Tapsi Fiber Reinforced Polyester Composites. In Emerging Trends in Mechanical Engineering(pp. 85-91). Springer, Singapore.
  7. Sankaraiah, G., Kumar, G. S., Kumar, V. S., & Reddy, P. V. (2019, October). Experimental and comparative study on material effect of vortex tube on the cold outlet air temperature. In AIP Conference Proceedings(Vol. 2161, No. 1, p. 020021). AIP Publishing LLC.
  8. Reddy, P. V., Prasad, P. R., Krishnudu, D. M., & Hussain, P. (2019). Influence of fillers on mechanical properties of prosopis juliflora fiber reinforced hybrid composites. Materials Today: Proceedings.
  9. Reddy, P. V., Prasad, P. R., Krishnudu, D. M., & Goud, E. V. (2019). An Investigation on Mechanical and Wear Characteristics of Al 6063/TiC Metal Matrix Composites Using RSM. Journal of Bio-and Tribo-Corrosion5(4), 90.
  10. Reddy, M. V., Reddy, P. V., & Ramanjaneyulu, R. (2019). Effect of Heat Treatment and Sheet Thickness on Deep Drawing Formability: A Comparative Study. International Journal of Applied Engineering Research14(3), 802-805.
  11. P Venkateshwar Reddy, B Veerabhadra Reddy, Srinivasa Rao (2018), A Numerical Study on Tube Hydroforming Process to optimize the Process Parameters by Taguchi Method, Materials Today: Proceedings, 5(11), 25376-25381.
  12. P Venkateshwar Reddy, J Ramesha, P Srinivasa Rao, P Janaki Ramulu (2018), Experimental and numerical analysis on deep drawing rectangular cups made of different anisotropic materials, Materials Today: Proceedings, 5(13), 27171-27177.
  13. G Suresh Kumar, B Veerabhadra Reddy, G Sankaraiah, P Venkateshwar Reddy, Modeling the Performance of Vortex Tube using Response Surface Methodology and Artificial Neural Networks, IOP Conference Series: Materials Science and Engineering, 390, 012010 (2018).
  14. Mohana Krishnudu, D. Sreeramulu, and P. Venkateshwar Reddy, Optimization the mechanical properties of coir-luffa cylindrica filled hybrid composites by using Taguchi method, AIP Conference Proceedings 1952, 020058 (2018).
  15. Lava Kumar , B. Veerabhadra Reddy & P. Venkateshwar Reddy, Experimental Comparison of Solar Paraboloid Collector With and Without Mirror in Aluminum Foil as Reflectors, International Journal of Mechanical and Production Research and Development, Vol. 8, Issue 2, Apr 2018, 1117-1124.
  16. Raghavendra Rao, G. Suresh Kumar, P. Hari Sankar D. Mohana Krishnudu & P. Venkateshwar Reddy, Effect of Alkali Treatment on Tensile/Chemical Properties and Dielectric Strength of Bamboo and Grass Fiber Reinforced Polyester Composites, International Journal of Mechanical and Production Research and Development,Vol. 8, Issue 1, Feb 2018, 1021-1026
  17. M Venkat Reddy, M Chandra Sekhar Reddy, P Venkateshwar Reddy, Investigating the Mechanical Properties of FCC Structured Material Processed by Equal Channel Angular Extrusion, International Journal of Applied Engineering Research, 13 (6), pp. 3716-3718.
  18. D Mohana Krishnudu, D Sreeramulu, P Venkateshwar Reddy, H Raghavendra Rao, Effect of Alkali Treatment on Mechanical Properties of Prosopis Juliflora Hybrid Composites, International Journal of Applied Engineering Research, 13 (5), pp. 2933-2935
  19. P Venkateshwar Reddy, Perumalla Janaki Ramulu, G Sandhya Madhuri, Dasari Govardhan, P V S Ram Prasad, Design and Analysis of Deep Drawing Process on angular Deep Drawing Dies for Different Anisotropic Material, Materials Science and Engineering 149 (2016) 012142 doi:10.1088/1757-899X/149/1/012142
  20.  Venkateswar Reddy, S. Hari Prasad, P. Janaki Ramulu, Sirish Battacharya, Daya Sindhu Guptha, “The effect of formability studies on DP steel with different geometries of die/blank holder and punch radii in angular deep-drawing dies”, Applied mechanics and materials Vols. 813-814 (2015) pp 269-273, doi: 10.4028/wwwscientific.net/AMM 813-814.269
  21. U. Pranavi, P. Venkateshwar Reddy, K. Lavanya, NV NarasimhaCharyulu, Perumalla Janaki Ramulu, “Effect of mechanical properties on Deep drawing formability prediction”, International Journal of Current Engineering and Technology, Special Issue 2, 303-305, DOI:http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.55.
  22. Shaik Mohammad Yahiya, Venkateshwar Reddy, G. Upendra Rao, “Computational Fluid Dynamics Study of IC Engine – Energy Recovery System, International Journal of Scientific and Research Publications.
  23. Naveena Latha, Dr. P. Ram Reddy, Dr. D. V. Ravi Shanker, P. Venkateshwar Reddy, “Non–Chemical Water Treatment By Hydro–Dynamic Vortex Precipitation Mechanism”, International Journal of Engineering Studies. ISSN 0975-6469 Volume 8, Number 2 (2016), pp. 259-275.
  24. K. Naveena Latha, Dr. P. Ram Reddy, Dr. D. V. Ravi Shanker, P. Venkateshwar Reddy, “Design And Development of Mechanized Dissolved Salt Concentration Regulator”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Volume 13, Issue 6 Ver. VI (Nov. – Dec. 2016), PP 80-86.
  25. A. Lavanya, P. Venkateshwar Reddy, P. Janaki Ramulu, “Numerical Simulation of INCONNEL 625 Alloy Deformation Behaviors Using Equal Channel Angular Extrusion Process With Different Die Angles”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), PP. 71-74.

International Conferences:

  1. Sankaraiah, K. Mallikarjun, Parthasaradhi, P. Venkateshwar Reddy, “Six Sigma Approach to Improve the Quality of a Restaurant: A Case Study”, First Online – ICCIASH – 2020.
  2. Raghavendra Rao, K. Madhava Reddy, P. Venkateshwar Reddy & R. Meenakshi Reddy, “Effect of Fibre Orientation on Mechanical Properties of Hardwika Binata and Bamboo Fibre Reinforced Epoxy Composites”, ICRACM – 2019.
  3. Meenakshi Reddy, D. Mohana Krishnudu, B. Madhusudhan Reddy & P. Venkateshwar Reddy, “Effect of Alkali Treatment on Mechanical Properties of Tapsi Fiber Reinforced Polyester Composites”, ICETME – 2018.
  4.  Venkateshwar Reddy, B. Veerabhadra Reddy and P. Srinivasa Rao, A Numerical Study on Tube Hydroforming process to optimize the process parameters by using Taguchi Method, IconAMMA-2017.
  5.  Venkateshwar Reddy, K. Naveena Latha , P. Srinivasa Rao and P. Janaki Ramulu, Experimental And Numerical Analysis of Equal Channel Angular Extrusion Process, ICRAMMCE-2017.
  6.  Venkateshwar Reddy, J. Ramesh, P. Srinivasa Rao and P. Janaki Ramulu, Experimental and numerical analysis on deep drawing rectangular cups made of different anisotropic materials, ICAMM-2016.
  7. Satish Kumar , Pavan Bagali, Venkateshwar Reddy, P. Janaki Ramulu, Optimization of Process Parameters of Delamination Zone for Drilled Holes in FRP Composites in CNC Machine, International Conference on Material, Manufacturing and Design 2016.
  8. P Venkateshwar Reddy, Perumalla Janaki Ramulu, G Sandhya Madhuri, Dasari Govardhan, P V S Ram Prasad, Design and Analysis of Deep Drawing Process on angular Deep Drawing Dies for Different Anisotropic Material, IConAMMA 2016.
  9.  Venkateswar Reddy, S. Hari Prasad, P. Janaki Ramulu, Sirish Battacharya, Daya Sindhu Guptha, “The effect of formability studies on DP steel with different geometries of die/blank holder and punch radii in angular deep-drawing dies”, ICMME – 2015.
  10.  Venkateshwar Reddy, Perumalla Janaki Ramulu, A. Lavanya, U. Pranavi, N. V. Narasimha Charyulu, Effect of circular and rectangular draw beads on hemispherical cup forming, Comparing with classical tool design using finite element analysis, Conference on Sheet Metal Forming Research Association 2014 (SMFRA-2014), November 27-28, IIT Bombay, pp. 51-53.
  11. Pranavi, P. Venkateshwar Reddy, K. Lavanya, NV NarasimhaCharyulu, Perumalla Janaki Ramulu, “Effect of mechanical properties on Deep drawing formability prediction”, ICAMS-2014.

National Conferences:

  1. Lavanya, P. Venkateshwar Reddy, P. Janaki Ramulu, “Numerical Simulation of INCONNEL 625 Alloy Deformation Behaviors Using Equal Channel Angular Extrusion Process With Different Die Angles”, National Conference On “Innovative Approaches In Mechanical Engineering”, Secunderabad-2017.
  2. Pranavi, P. Venkateshwar Reddy, Perumalla Janaki Ramulu, “Formability Studies on Aluminum Alloy Sheets through Deep Drawing Process”, All India Manufacturing Technology Design and Research AIMTDR-2014.
  3.  Venkateswar Reddy, A. Lavanya, S. Hari Prasad, P. Srinivasa Rao, P. Janaki Ramulu,Prediction of forming behavior of dual phase (DP) steel during deep drawing process”,  National conference of Andhra Pradesh Academy of Sciences, 13-15, November 2014, pp. 39.
  4. Lavanya, P. Venkateswar Reddy, J. Hari Chandana, P. Srinivasa Rao, P. Janaki Ramulu, “Parametric study on equal channel angular extrusion process for non ferrous alloys”, National conference of Andhra Pradesh Academy of Sciences, 13-15, November 2014, pp. 158.
  5. V.Narasimha Charyulu, B. Dheeraj Reddy, P. Venkateshwar Reddy, P. Srinivasa Rao, P. Janaki Ramulu, “Tensile behavior prediction of FSW sheet using ROM method”, National conference of Andhra Pradesh Academy of Sciences, 13-15, November 2014, pp. 227.
  6. V. Narasimha Charyulu, Perumalla Janaki Ramulu, B. Dheeraj Reddy, K. Madhu Babu, P. Venkateshwar Reddy, Sirish Battacharya, Daya Sindhu Guptha, Prediction of Multi-hole extrusion process for making circular and square cross sectional bars, National Conference on Innovation in Futuristic Materials & Manufacturing Techniques (IFMMT-2014) December 26-27, 2014.

Patents:

S.No Title of Patent Application  Number Status/Granted
1 Automatic Laptop Lid Closing Device 201841005231 Published
2 Fuel Flow Measuring Device 201841038007 Published
3 Drinkware Capable of Storing Thermal Energy for Longer Period 202041011191 Published
4 An apparatus for ATMOSFORMING a workpiece into a product 202041020050 Published
5 A seating device with built-in exhaust fan to remove heat 202041039815 Applied-Full application
6 A Bluetooth Based Thermal Scanner and Data Montoring System 202041028295 Applied-Provisional application