Dr. Tirividhi Vijaya Babu

Department:
Mechanical Engineering
Faculty Id:
VCE1037
Designation:
Professor
Years of Experience:
18 Years
Employment Status:
Full Time – Ratified by JNTUH

Date Of Birth

10 July , 1973

Qualification

Ph.D in PRODUCTION 2016 ,DELHI TECHNOLOGICAL UNIVERSITY, DELHI
PG Degree in ME(AUTOMATION AND ROBOTICS),2005, OSMANIA COLLEGE OF ENGINEERING
UG Degree in B.Tech ,1997,JNTU Ananthapur

Areas of Specialization:

Production

Subjects Taught:

Engineering Graphics , Machine tools and Metrology , Mechanics of solids, Metallurgy and Material science, Production Technology, Kinematics of, Machinery, Mechanics of fluids and Hydraulic Machines, Machine Drawing, Engineering Metrology, Design of Machine Members –I&II, Heat Transfer, Automation in manufacturing, Design for Manufacturing ,CAD/CAM, Instrumentation and Control System , Plant Layout and Material Handling, Additive manufacturing .

Research

  1. M. Tech Students Guided: 10
  2. Ph.D Scholars Presently Working : No

Publications:

International Journals:

  1. Vijaya Babu, Dr.KVP Chakradhar ,Dr.M.Ashok kumar ,P.Satyanarayana Raju, “ Optimization of machining parameters on 7075 Aluminum alloy using Taguchi and ANOVA for surface roughness”, International Journal of Recent technology and engineering (IJRTE), Vol.8, No.5,(2020), pp. 90-95
  2. Vijaya Babu, Dr S.Venukumar,M.Cheepu and D.Venkateswarlu , “ TIG Arc welding –Brazing of dissimilar materials – An overview”, Recent Advances in Materials and Manufacturing  Technologies , Vol.969, No.02, (2019), pp. 768-774.
  3. Vijaya Babu, Dr S.Venukumar,M.Cheepu and D.Venkateswarlu , “ Cold metal transfer (CMT) Welding  od dissimilar materials – A Review”, Recent Advances in Materials and Manufacturing  Technologies , Vol.969, No.02, (2019), pp. 685-690.
  4. Vijaya Babu, “ Optimization of machining parameters on 7075 Aluminium alloy using Taguchi  and ANOVA ”, Journal of innovation  in Mechanical Engineering, Vol.2, No.01, (2019), pp. 27-31.
  5. Vijaya Babu, “ Optimization of Processes parameters of aluminium alloy 8011 in wire cut Electrical discharge  machining (WEDM) using Taguchi  and ANOVA  ”, International Journal of  pure and applied mathematics, Vol.120, No.01, (2018), pp. 8155-8164.
  6. Vijaya Babu, “Experimental investigation of wire electrical discharge machining process parameters on SS304  using Taguchi method ”, International Journal of  Current Engineering and Technology , Vol.8, No.03, (2018), pp. 504-507.
  7. Vijaya Babu, Dr.J.S Soni , “ Investigation of Process Parameters Optimization in Die – Sinking EDM to Improve Process Performance Using Taguchi Technique ”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) , Vol.13, No.5,Ver 3, (sept-oct,2016), pp. 130-133.
  8. Vijaya Babu, Dr.J.S Soni, S. Ajaya Kumar  , “ An experimental investigation of machining parameters on electrical discharge machining of M-250 (Maraging) steels”, International journal of engineering sciences & research technology (IJESRT) Vol.5, No.12, December 2016, pp. 55-60.
  9. Vijaya Babu, Dr.J.S Soni , “ Optimization of WEDM parameters for surface roughness on AISI 316 L stainless steel using ANOVA ”, International Journal of Latest Trends in Engineering and Technology (IJLTET) Vol.40, No.6, October2016, pp. 212-215.
  10. Vijaya Babu, Dr.J.S Soni , “ Electrical Discharge Machining (EDM): A Review ”, International Journal of Engineering Trends and Technology (IJETT) – Volume-40 Number-6 – October 2016 , pp. 371-375.
  11. Vijaya Babu, Dr.J.S Soni , “Experimental study of surface finish on AISI 316 Stainless steel during Electro Discharge Machining ”, International Journal of Engineering and Management Research (IJEMR) – Volume-6 , Number-6,November – December 2016 ,  pp. 279-281.
  12. Vijaya Babu, Dr.J.S Soni ,S.Ajaya Kumar “Effect Of Wire Edm Process Parameters On Surface Roughness Of AISI -4140 (Carbon Steel) Using Taguchi Method ”, International e-Journal For Technology And Research-2017 – Volume-1 , Number-2,March  2017 ,  pp. 1-6.
  13. Vijaya Babu, Dr.J.S Soni , “ Influence of Machine feed rate in WEDM with constant current (8A) using Brass wire on Titanium Ti-6Al-4V. ”, International e-Journal For Technology And Research-2017 Volume-1 , Number 5 ,May  2017 ,  pp. 1-6.
  14. Vijaya Babu, S.Ajaya kumar , Dr.J.S Soni , “Multi Response Optimization of Wire-EDM Process Parameters of Aluminum Alloy 6063 using Taguchi method ”, International Journal of current Engineering and technology (IJCET) – Volume-7 , Number-3, MAY 2017 ,  pp. 1040-1045.
  15. Vijaya Babu, Dr.J.S Soni ,S.Ajaya Kumar “parametric optimization of tool wear rate (TWR) on die-sinking EDM by using Taguchi and ANOVA ”, International e-Journal For Technology And Research-2017 – Volume-1 ,Issue 5,May 2017 ,  pp. 1-6.
  16. Vijaya Babu, S.Ajaya kumar , Dr.J.S Soni , “ Optimization of process parameters for surface roughness of Inconel 625 in Wire EDM by using Taguchi and ANOVA method ”, International Journal of current Engineering and technology  (IJCET) – Volume-7 , Number-3, JUNE 2017 ,  pp. 1127-1131.
  17. Vijaya Babu, B.Subbaratnam , Dr.J.S Soni ,“Influence of Processes Parameters of Al 6063/ZnSio4p Metal Matrix Composite on WEDM using Response Surface Methodology (RSM)”, International Journal of Engineering Technology Science and Research (IJETSR) – Volume-4 , Number-8, August ,2017 , pp. 195-201.
  18. Vijaya Babu, S.M .Gangadhar Reddy, Dhanaraj .B, Satyanarayana Raju .P, “Prediction of Optimal Conditions for WEDM of Al 6063/ ZrSiO4(p) Metal Matrix Composites using Response Surface Methodology (RSM)”, International Journal of Engineering and Management Research (IJEMR) – Volume-7 , Number-4, July-August ,2017 , pp. 380-384.
  19. Vijaya Babu, S.Venukumar , Surya Prakash ,N Santhi Sree , “Optimization of WEDM process parameters on AL  7075 by using Taguchi technique and Response Surface Methodology (RSM )”, International Journal of Mechanical Engineering and Technology (IJMET)  – Volume-8 , Number-8, August ,2017 ,  pp. 941-950.
  20. Vijaya Babu, S.Venukumar , BLN Krishna Sai ,S.Srikrishnan “ microstructural behaviour and mechanical properties of walking friction stir spot welding of commercial pure magnesium”, International Journal of Mechanical Engineering and Technology (IJMET)  – Volume-8 , Number-8, August ,2017 ,  pp. 1238-1246.
  21. Vijaya babu,B.Venkatesh, K.Srikar, A.Seshappa “ Wear behavior of multilayer over  mono layer of Fe-C-Cr  Hard facing alloy on ASTM   A 105 Steel  ”, International Journal of Mechanical Engineering and Technology (IJMET)  – Volume-8 , Number12, December  ,2017 ,
  22. Seshappa, B.Venkatesh, T.Vijaybabu and P.Prasnna, “Optimization of significant parameter on mechanical activities of AlMg1SiCu fusion metal matrix composites with Taguchi included Fuzzy Approach ”, International Journal of Mechanical Engineering and Technology 8(12), 2017, pp. 1089– 1095.

International Conferences:

  1. T.Vijaya Babu, B.Subbaratnam, Dr.J.S Soni , “Influence of Processes Parameters of Al 6063/ZnSio4p Metal Matrix Composite on WEDM using Response Surface Methodology (RSM)”, 6th International Conference on Research Trends in Engineering, Applied Science and Management (ICRTESM-2017) at Bangalore , on 6th August 2017,  702-708.
  2. Vijaya Babu, Dr.J.S Soni, ” Influence of process parameter    in   machining  Titanium  Ti-6Al-4V alloy using Brass wire and  constant current (8A)  on WEDM  , International Conference on Recent Advances in Materials, Mechanical and Civil Engineering (ICRAMMCE-2017)June 1-2,2017.
  3. Vijaya Babu, Dr.J.S Soni, “Investigation of Process Parameters Optimization in Die-Sinking and Wire Cut EDM to Improve Process Performance using Taguchi Technique ”, International Conference on Advances in Materials & Manufacturing (ICAMM-2016)December 8-10,2016.
  4. Presented Research paper in International conference on Material Processing And Characterization from 14th to 15th March, 2016 organized by Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad.
  5. Vijay Babu , Dr.D.V .Ravishankar “ Study of process parameters involved in Electrical Discharge Machining of tough materials – A review ” (page No.186), at National Conference on Fast Emerging Trends in Engineering and Technology (NCOFEET-2K15) March 25 th -26 th , 2015.
  6. Presented Research paper in National conference on Emerging Trends in Mechanical Engineering  from 29th to 30th Dec, 2014 organized by Department of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad.
  7. Vijay Babu , Dr.Eshwara Prasad.Koorapati “ Concept , Design and Material Removal Rate of Cylindrical Wire Electrical Discharge Machining Processes ” (page No.43), at National Conference on State of the Art of Technologies in Mechanical Engineering (NCSAME-2009) Aug 20th -21st ,2009 JNTUH Hyderabad”.

Workshops, FDP’S and Conferences Organized/Participated:

  1. Participated in Faculty Development Program on “Pedagogical Training ” from 09th to 13th    December ,2019 organized by TKR College of Engineering ,Hyderabad
  2. Attended workshop on  SCILAB  organized by Department of Mechanical engineering at Vardhaman college of Engineering shamshabad, Hyderabad  on 4th May 2019.
  3. Participated in Faculty Development Program on “Design of Experiments using Taguchi Approach” from 12th to 17th July 2019 , organized by TKR College of Engineering ,Hyderabad.
  4. Participated in Faculty Development Program on “Faculty Development programme in Entrepreneurship from 7.11.2016 to 19.11.2016, organized by Vardhaman College of Engineering, Kacharam, Shamshabad.
  5. Attended One-week workshop on Computational approach through MATLAB organized by Department of Mechanical engineering at Vardhaman college of Engineering shamshabad, Hyderabad from 7th to 12 November, 2016.
  6. Acted as  a Convenerfor workshop  “National conference on fast emerging trends in engineering and technology (NCOFEET-2K15)” organized by Department of Mechanical Engineering, Bharat Institute of Engineering and Technology, Ibrahimpatnam, hyderabad from March 25th -26th  , 2015.
  7. Acted as  a Convener  for FDP   “Advanced Manufacturing ” organized by Department of Mechanical Engineering, Bharat Institute of Engineering and Technology, Ibrahimpatnam, hyderabad from March 5-9th ,2014.
  8. Participated in MISSION 10X workshop conducted from 10th May to 14th May, 2011 at VITS, Deshmukhi,

WEBINARS   ATTENDED

  1. Participated in online Webinar  on “Engineering drawing practice for technocrats ” on 16th May 2020  organized by GEETHANJALI INSTITUTE OF SCIENCE &TECHNOLOGY  ,NELLORE.
  2. Participated in online Webinar  on “E-VEHICLES FOR SUSTAINABLE TRANPORTATION  ” on 14th May 2020  organized by GEETHANJALI INSTITUTE OF SCIENCE &TECHNOLOGY  ,NELLORE.
  3. Participated two days online workshop on “ Patent drafting and processing with importance of trade mark and copy right ” organized by Journal of   Advanced  Engineering Research &Powered  by Hexacube India  ,on  08th and 09th May 2020.
  4. Participated in Faculty Development Program on “ Machine Learning ” from 11th  to 15th    May ,2020 Conducted by DATA TECH LABS. AUCKLAND ,NEWZEALAND .
  5. Participated in online Webinar  on “Functionally Graded Metal Matrix Composites for Engineering Applications ” on 21st  May 2020  conducted by department of mechanical engineering , SRI INDU College of Engineering &Technology  ,HYDERABAD.
  6. Participated in online Webinar  on “ADVANCED POWER TECHNOLOGIES  ” on 20th   May 2020  conducted by department of mechanical engineering , SRI INDU College of Engineering &Technology  ,HYDERABAD.
  7. Participated in online Webinar  on “ADVANCED POWER TECHNOLOGIES  ” on 20th   May 2020  conducted by department of mechanical engineering , SRI INDU College of Engineering &Technology  ,HYDERABAD.
  8. Participated in online Webinar  on “Awareness Program on Outcome Based Education ” on 19th  May 2020  conducted by department of Aeronautical  Engineering , MLR  institute of  Technology  ,HYDERABAD.
  9. Participated in one week Faculty Development Program on “ Additive manufacturing : The research scopes & Future trends  ” from 22nd to 28th    May ,2020 Conducted by Santhiram Engineering College ,Nandyal , Karnool Dist.
  10. Participated in online Webinar  on “Case studies on biomedical Applications of 3D Printing ” on 23rd   May 2020  conducted by department of mechanical engineering , SRINIDHI  Institute Of Science &Technology  ,HYDERABAD.
  11. Participated in online Webinar  on “3D Printing Technologies : Challenges  ” on 20th   May 2020  conducted by department of mechanical engineering , SRINIDHI  Institute Of Science &Technology  ,HYDERABAD.
  12. Participated in online Webinar  on “Geometrical dimensioning & Tolerancing  (GD&T)” on 21st  May 2020  conducted by department of mechanical engineering , SRINIDHI  Institute Of Science &Technology  ,HYDERABAD
  13. Participated in online Webinar  on “Machinability studies of difficult to cut materials under sustainable cooling environment (Taguchi Method ) ” on 22nd  May 2020  conducted by department of mechanical engineering , SRINIDHI  Institute Of Science &Technology  ,HYDERABAD
  14. Participated in online Webinar  on “Enriching research skills, research writing and research  funding techniques” on 2nd June 2020  conducted by department of mechanical engineering , SRINIDHI  Institute Of Science &Technology  ,HYDERABAD.
  15. Completed online  non-credit course authorized by University at Buffalo and The  State University of New York  and offered through Coursera on “ADVANCED MANUFACTURING  PROCESS ANALYSIS ” on 18th April  2020 .
  16. Completed online  non-credit course authorized by University at Buffalo and The  State University of New York  and offered through Coursera on “DIGITAL MANUFACTURING &DESIGN ” on 16th April

Patents:

  1. TITLE OF THE INVENTION :

        “Apparatus and method for detecting the clogging of  a fuel filter   ” (2019)           (File No: 201741041935)

Books Published:

None

Research Projects Undertaken:

None