Date of Birth:
30 July 1972
Areas of Specialization :
Engineering Design
Qualification:
Ph.D. in Engineering Design
PG Degree in M. Tech (Engineering Design)
UG Degree in B. Tech (Mechanical Engineering).
Subjects Taught:
Design Of Machine Members I, Design Of Machine Members II, Kinematics Of Machinery, Dynamics Of Machines, Power Plant Engineering, Production Technology I, Production Technology II, EMM, AHP
Papers Published:
LIST OF PUBLICATIONS(National & International Standards)
-
International Journals:
- S.Ananth, T.V.Moorthy, 2014, ‘Dry Sliding Wear Behaviour of Titanium and Boron Carbide Nano Coated Grey Cast Iron Cylinder Liner’, Applied Mechanics and Materials, vol. 592, PP. 1291-1295.
- Udaya Prakash, J, Moorthy, TV & Ananth, S 2014, ‘Fabrication and Sliding Wear Behaviour of Metal Matrix Composites’, Applied Mechanics and Materials, v 612, pp. 157-162.
- Ananth, S, Udaya Prakash, J, Moorthy, TV & Hariharan, P 2015, ‘Optimization of Wear Parameters at High Temperature for Gray Cast Iron Using Taguchi Technique’, International Journal of Applied Engineering Research, vol.10 no.51, pp. 618-621
- Ananth, S, Udaya Prakash, J, Moorthy, TV & Hariharan, P 2015, ‘Optimization of wear Parameters for Gray Cast Iron using Taguchi Technique’, Journal of Mines, Metals & Fuels 1 no. Special Edition, pp. 118 – 122.
- Ananth, S, Udaya Prakash, J, Moorthy, TV & Hariharan, P 2015, ‘Wet Sliding Wear Optimization of Gray Cast Iron using Taguchi Technique’, International Journal of Vehicle Structures & Systems, 7 no.4, pp. 154-156.
- Udaya Prakash, S.Ananth, G.Sivakumar & T.V.Moorthy 2018, ‘Multi-Objective Optimization of Wear Parameters for Aluminium Matrix Composites (413/B4C) using Grey Relational Analysis’ Materials Today: Proceedings, vol. 5 no.2, pp. 7207 – 7216.
- Ananth, J.Udaya Prakash, T.V.Moorthy, P.Hariharan, 2018, ‘Optimization of Wear Parameters for Grey Cast Iron under Different Conditions using Grey Relational Analysis, Materials Today: Proceedings, vol. 5 no.2, pp. 7346–7354.
- Udaya Prakash, S.Ananth, S.Jebarose Juliyana & T.V.Moorthy 2018, ‘Multi-Objective Optimization of Tribological Properties of AMCs (356/B4C) using Grey Relational Analysis’ International Journal of Mechanical and Production Engineering Research and Development, vol. 8, no. 8 Special issue, pp. 197 – 201.
- Ananth, J.Udaya Prakash, P.John Paul & T.V.Moorthy 2018, ‘Optimization of Wear Parameters of GCI under Lubrication and Coating using GRA’ International Journal of Mechanical and Production Engineering Research and Development, vol. 8, no. 8 Special issue, pp. 379 – 384.
- Ananth, A. R. Sivanesh, J.Udaya Prakash & P. John Paul, 2019, ‘Wear parameter optimisation of piston and cylinder liner material (GCI) using Taguchi technique’ International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2019.1670256.
- Ananth, J. Udaya Prakash, R. Krishna Murthy, K. V. Arun Pillai & T. V. Moorthy, 2020, ‘Tribological Behaviour of Grey Cast Iron–EN31 Steel Contact under Sliding Conditions’, Transactions of the Indian Institute of Metals, 73(3), 793-798.
- Divya Sadhana, J. Udaya Prakash, P. Sivaprakasam & S.Ananth, 2020, “Wear behaviour of aluminium matrix composites (LM25/Fly Ash) – A Taguchi approach”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.03.684.
- Udaya Prakash J., Ananth S., Jebarose Juliyana S., John Paul P. (2020) Effect of Wire EDM Process Parameters on Machining of Aluminium Matrix Composites (356/Fly Ash). In: Yang LJ., Haq A., Nagarajan L. (eds) Proceedings of ICDMC 2019. Lecture Notes in Mechanical Engineering. Springer, Singapore. pp.411-419. https://doi.org/10.1007/978-981-15-3631-1_39.
- Udaya Prakash, A. Divya Sadhana, S. Ananth, K. V. Arun Pillai, 2020, Optimization of wear parameters of aluminium matrix composites (LM6/Fly Ash) using Taguchi technique, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.05.550.
- Ananth, J. Udaya Prakash, S. Jebarose Juliyana, C. Sarala Rubi, A.Divya Sadhana, Effect of process parameters on WEDM of Al – Fly ash composites usingTaguchi Technique, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.07.615.
- Ananth, P. Sivaprakasam, J. Udaya Prakash, P. Maheandera Prabu, Varatharaju Perumal, G. Kalusuraman, “Tribological Behavior and Surface Characterization of Gray Cast Iron-EN31 Steel under Lubricated Sliding Conditions”, Journal of Nanomaterials, vol. 2021, Article ID 7725959, 9 pages, 2021. https://doi.org/10.1155/2021/7725959
https://scholar.google.com/citations?user=iur3leMAAAAJ&hl=en
National Journals:
- Ananth, S, Udaya Prakash, J, Moorthy, TV & Hariharan, P 2015, ‘Optimization of Wear Parameters at High Temperature for Gray Cast Iron Using Taguchi Technique’, International Journal of Applied Engineering Research, vol.10 no.51, pp. 618-621
- Ananth, J.Udaya Prakash, T.V.Moorthy, P.Hariharan, 2018, ‘Optimization of Wear Parameters for Grey Cast Iron under Different Conditions using Grey Relational Analysis, Materials Today: Proceedings, vol. 5 no.2, pp. 7346–7354.
http://www.irphouse.com
International /National Conferences:
International Conferences:
- Ananth, J.Udaya Prakash, P.John Paul & T.V.Moorthy 2018, ‘Optimization of Wear Parameters of GCI under Lubrication and Coating using GRA’ International Journal of Mechanical and Production Engineering Research and Development, vol. 8, no. 8 Special issue, pp. 379 – 384.
- Udaya Prakash, S.Ananth, G.Sivakumar & T.V.Moorthy 2018, ‘Multi-Objective Optimization of Wear Parameters for Aluminium Matrix Composites (413/B4C) using Grey Relational Analysis’ Materials Today: Proceedings, vol. 5 no.2, pp. 7207 – 7216.
- Divya Sadhana, J. Udaya Prakash, P. Sivaprakasam & S.Ananth, 2020, “Wear behaviour of aluminium matrix composites (LM25/Fly Ash) – A Taguchi approach”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.03.684.
- Udaya Prakash J., Ananth S., Jebarose Juliyana S., John Paul P. (2020) Effect of Wire EDM Process Parameters on Machining of Aluminium Matrix Composites (356/Fly Ash). In: Yang LJ., Haq A., Nagarajan L. (eds) Proceedings of ICDMC 2019. Lecture Notes in Mechanical Engineering. Springer, Singapore. pp.411-419. https://doi.org/10.1007/978-981-15-3631-1_39
- Ananth, J. Udaya Prakash, S. Jebarose Juliyana, C. Sarala Rubi, A.Divya Sadhana, Effect of process parameters on WEDM of Al – Fly ash composites usingTaguchi Technique, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.07.615
- Udaya Prakash, A. Divya Sadhana, S. Ananth, K. V. Arun Pillai, 2020, Optimization of wear parameters of aluminium matrix composites (LM6/Fly Ash) using Taguchi technique, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.05.550.
National Conferences:
- Ananth, S, Udaya Prakash, J, Moorthy, TV & Hariharan, P 2015, ‘Optimization of Wear Parameters at High Temperature for Gray Cast Iron Using Taguchi Technique’, International Journal of Applied Engineering Research, vol.10 no.51, pp. 618-621
- Ananth, J.Udaya Prakash, T.V.Moorthy, P.Hariharan, 2018, ‘Optimization of Wear Parameters for Grey Cast Iron under Different Conditions using Grey Relational Analysis, Materials Today: Proceedings, vol. 5 no.2, pp. 7346–7354.
Workshops, FDP’S and Conferences Organized:
Books Published:
- Udaya Prakash, J, Moorthy, TV & Ananth, S 2014, ‘Fabrication and Sliding Wear Behaviour of Metal Matrix Composites’, Applied Mechanics and Materials, v 612, pp. 157-162.
- Udaya Prakash J., Ananth S., Jebarose Juliyana S., John Paul P. (2020) Effect of Wire EDM Process Parameters on Machining of Aluminium Matrix Composites (356/Fly Ash). In: Yang LJ., Haq A., Nagarajan L. (eds) Proceedings of ICDMC 2019. Lecture Notes in Mechanical Engineering. Springer, Singapore. pp.411-419.
Research Projects Undertaken:
Completed Projects:
Ongoing Projects:
Patents:
S.No |
Title of Patent |
Application Number |
Status/Granted |
1 |
Horizontal Axis, Cam Guided, Telescopic Blade, Yaw Controlled Wind Mill |
201841033956 |
Published |
2 |
Intelligent Display Board and a System to Display Data Received Over a Network. |
201841010055 |
Published |
3 |
Surface Evaluation Characteristics of Gray Cast Iron and En-31 under Sliding Condition Application |
202111000676 |
Published |