S. No. PAPERS PUBLISHED
1 D V Ramana Reddy, B Subba Ratnam and G Venkateswara Rao, ”Prediction of Dynamic Stability Behavior of Thin Square Plates Subjected to Constant Compressive and Periodic Including Constant Compressive Loads on Perpendicular Edges,” International Journal of Current Engineering and Technology, 2014.
2 S V Prabhakar Vattikuti and B Venkatesh, “Nano Structured Coatings for Demanding Tribological Applications,” International Conference on Advances in Mechanical Sciences, 2014.
3 S V Prabhakar Vattikuti and B Venkatesh, “Hot Embossed TiO2 Sol-Gel Wave Guide Films for Sensors Applications,” International Conference on Advances in Mechanical Sciences, 2014.
4 N.Venkat Rao, M.Rajasekhar and Mohd Mujeebuddin ahmed, “An Experimental Study on Durability of High Strength Self Compacting Concrete,” International Journal of Research in Engineering and Technology, Volume 2, 2014.
5 K.Deepak, “Investigation of Separator Parameters in Kalina Cycle Systems,” International Conference on Advances in Mechanical Sciences, 2014.
6 K.Deepak, “Hot Embossed TiO2 Sol-Gel Wave Guide Films for Sensors Applications,” International Conference on Advances in Mechanical Sciences, 2014.
7 K.Deepak, “Thermodynamic Modeling of SOFC-GT Combined Cycle Power Plant,” International Conference on Advances in Mechanical Sciences, 2014.
8 Shaik Khader Basha, Srinivasa Rao P, T.Venkata Sheshaiah Naidu and Rajagopal K, “Use of EGR in Diesel Engine for Investigating the Performance and Emission Characteristics in Diesel Engine,” International Conference on Advances in Mechanical Sciences, 2014.
9 P.Ramakrishna Reddy, T.Venkata Seshaiah Naidu and K. GovindaRajulu, “Experimental Investigation on Diesel Engines by Swirl Induction with Different Manifolds,” International Conference on Advances in Mechanical Sciences, 2014.
10 Krupakar Pasalaa, Bhargava, H.JeevanRao, K.SreenathReddy, and T.V.Seshaiah Naidu, “A CFD Investigation into the Flow Distribution on a Car Passing by a Truck,” International Conference on Advances in Mechanical Sciences, 2014.
11 Sreedhar Vulloju, E.Manoj Kumar, M.Suresh Kumar and K.Krishna Reddy, “Analysis of Ljungstrom Air Preheater Elements,” International Conference on Advances in Mechanical Sciences, 2014.
12 Sreedhar Vulloju, E.Manoj Kumar, M.Suresh Kumar and K.Krishna Reddy, “Increasing the Performance of Wind Mill by Flipping its Rotating Elements,” International Conference on Advances in Mechanical Sciences, 2014.
13 Anil Kumar V, “Reliability modeling and performance analysis of dumper systems in mining by KME method,” International Conference on Advances in Mechanical Sciences, 2014.
14 Chinta Praveen Kumar, “Reality of Sisyphus,” International Journal of Multidisciplinary, 2014, pp. 1-3.
15 H. Venkateshwara Reddy, B. Suresh Kumar, S. Vishwanadha Raju, “A Data Labeling method for Categorical Data Clustering using Cluster Entropies in Rough Sets”, 2014 Fourth International Conference on Communication Systems and Network Teschnologies.
16 H. Venkateshwara Reddy, B. Suresh Kumar, S. Vishwanadha Raju, C. Jayachandra, “ An Approach for Data Labeling and Concept Drift Detection Based on Entropy Model in Rough Sets for Clustering Categorical Data ”, 2014 Journal of Informatio & Knowledge Management, Vol. 13, No.2 1450020 (14 pages) World Scientific Publishing Co. DOI: 10.1142/S0219649214500208.
17 Mounika, D. Raman (Associate Professor), “ Justified Cross – Site Scripting Attacks Prevention from Client – Side ” 2014 International Journal on Computer Science and Engineering.
18 K. Vinay Kumar, D. Raman ( Associate Professor ), “ Secure Over Relay Cloud Storage with Access Control and Assure Deletion ”, International Journal of Engineering & Science Research.
19 Muralidher Mourya, J.Phani Prasad, “ Effective Attribute Selection to stand out in the market ”, 2014 International Journal for Advanced Trends in computer science and Engineering, Vol.3, No.1, Pages:68 – 72.
20 G Amrulla, Muralidher Mourya, Shaik Ansar Basha, “ Cut Detection in Wireless Sensor Networks: A Survey ”, May, 2014 International Journal of Engineering and Computer Science ISSN: 2319-7242 Volume 3 Issue 5 Page No.6002-6007.
21 Srinivas kolli, Assistant Professor Vardhaman College of Engineering, CSE ch. Sravan, Assistant Professor Vardhaman College of Engineering, CSE Dr. P. Chenna Reddy, JNTUA College of Engineering, CSE, “ Mutual Trust to Provide Data Security in Cloud Environment ”, IOSR Journal of Computer Engineering ( IOSR – JCE ).
22 Srinivas kolli, Assistant Professor Vardhaman College of Engineering, CSE ch. Sravan, Assistant Professor Vardhaman College of Engineering, CSE Dr. P. Chenna Reddy, JNTUA College of Engineering, CSE, “ Authentication and Integrity for Outsourced Enterprise Storage Environments ”, June 2014 IJCSN International Journal of Computer Science and Network, Volume 3, Issue 3,.
23 S. Venu Gopal, D. Rashwitha “Ranking of Service in Cloud Computing” July – Sept 2014 ISSN:0976 – 8491(Online) ISSN:2229-4333(Print) IJCST Vol 5.
24 S. Venu Gopal, D. K. Ramesh “Load Rebalancing Technique for File Sharing in Distributed System Environment” July – Sept 2014 ISSN:0976-8491(Online) ISSN:2229-4333(Print) IJCST Vol [ 5].
25 Sagar Gujjunoori and B.B. Amberker “Reversible Data Embedding for MPEG-4 Video Using Middle Frequency DCT Coefficients”, July 2014, Journal of Information Hiding and Multimedia Signal Processing, Vol. 5, No. 3, pp. 408-419
26 G. Nagalakshmi, M.Gopichand “Survey on Sharing Multiple Messages with Mobility” ,National Conference on Recent Research Advancements in Information Technology(NCRRAIT-2014), ISBN:978-93-82163-73-2, pp 128-130 September 2014.
27 Soundharya , A Bhanu Prasad , “ Network Traffic Classification With Native Bayes Predictions “ IJCST , Vol 5, Issue-3,ISSN-2229-4333,july-Sep 2014.
28 Thirupati Podeti , A Bhanu Prasad , “ Dynamic Caption Generation with Image Annotation “, IJCST, Vol 5(4), ISSN—0975-9646, 2014.
29 J Pradeep KUMAR , A Krishna Chaitanya ,” Health Care Privacy By Cloud computing “, IJCST, Vol : 5, Issue 3,ISSN : 0976-8491,July – Sep-2014
30 B Padmaja G ramesh “Prostate Histopathology Image Classification using Neural Network Process and Tumar Detection “ , IJCST , Vol : 5 , Issue 3 , ISSN : 2229-4333, Jul-sept 2014
31 B Padmaja G ramesh “Prostate Histopathology Image Classification using Neural Network Process and Tumar Detection “ , IJCST , Vol : 5 , Issue 3 , ISSN : 2229-4333, Jul-sept 2014.
32 B Padmaja , Buyyani Lavanya “A Novel Approach For Identification Of Forest Fires using Land surface Temperature Images” , IJCST , Vol : 5 , Issue 3 , ISSN : 2229-4333, Jul-sept 2014.
33 P Shiva , S K Prashanth “ Media Revolution in cloud computing Based On Mobile Streaming “,IJCST/Vol:5.3/2/A-0290, , Jul-sept 2014
34 Thirupati Lingala , Ashok Galipelli , Mahesh Thanneru, “ Traffic congestion Control through vechicle –to- vechicle and vechicle to infrastructure Communication “,IJCST, Vol 5(4), ISSN—0975-9646, 2014
35 P. Swetha, Vinod Bhupathi, Varun Maramraj, “ a defensive protocol for reducing routing overhead in mobile ad hoc networks”, IJAIEM,Vol3, Issue 9, ISSN 2319-4847 September 2014
36 M. Trinath Basu , G Venkatesh , Immidisrikanth , “ Efficient Data Collection using Randomized Multipath Routers in WSN” Vol-2,Issue-5,e-ISSN : 2347-2693.
37 Narasimha Prasad L V , Naveen Dondapati , Prudhivi Kumar Reddy “ Estimating Acidity in precipitation Using Sulphur Satellite Imagery” Vol-4 ,e-ISSN:2251-7545,Mar -2014.
38 Prof. Y. Pandu Rangaiah, “Reconfigurable Multiband Meandered Line Antenna”, International Science Index, Volume 8, No 6, 2014, PP 249-254.
39 Prof. Y. Pandurangaiah, S .Rajendar, “Power and Delay Analysis of Full Adder Cell Structure in Deep Submicron CMOS Technology”, International conference on photonics, VLSI and Signal Processing, 29 March 2014, PP 156-160.
40 N. Uma Maheshwar Rao, S. Rajendar, S. Srinivas, “Design of Integrated Multiband Antenna for Wireless Communication Networks”, International conference on photonics, VLSI and Signal Processing, 28-29 March 2014, PP 224-227.
41 S. Rajendar,“ A Novel Sleep Transistor Based Power-Aware Differential Current Sensing Amplifier For on Chip Interconnects”, International conference on photonics, VLSI and Signal Processing, 28-29 March 2014, PP 38-43.
42 J. Krishna Chaitanya, “Applying Image Fusion and Fuzzy Clustering Algorithms to Detect Changes in SAR Images”, International Journal of Computer Applications, ISSN: 0975-8887, Volume 102, No 12, September 2014, Pp 39-43, and Impact Factor-0.821.
43 J. Krishna Chaitanya,“ Embedded Boot Loader in Automobile Application”, International Journal of Computer Applications, ISSN: 0975-8887, 14 September 2014, pp 84-88, Impact Factor-0.821.
44 J. Krishna Chaitanya,” Area Level Fusion of Multi-Focused Images Using Feature Level Image Fusion (FLIP) Algorithm”, Proc of conference on advances in communication network and Computing, CNC, 2014, pp 1-9.
45 J. Krishna Chaitanya,” An Arm Based Door Phone Embedded System for Voice & Face Identification & Verification By Open CV &QT GUI Frame Work”, International Journal of Computer Applications, ISSN: 0975-8887, Volume 91, No-13, April 2014 pp 32-36, DOI: 10.5120/15944-5268, Impact Factor-0.821.
46 J. Krishna Chaitanya, “Image Segmentation of Multi-Focused Images Using Watershed Algorithm”, International Press Corporation Special Issue, ISSN 2347-5161, February 2014, pp 344-350, Impact Factor-2.552.
47 J. Krishna Chaitanya,” Covariance Estimation and Performance of Satellite Imaginary Data sing SMT”, International Journal of Scientific & Engineering Research, ISSN: 2229-5518, Volume4. Issue: 12, December 2014, pp 2063-2069, Impact Factor-1.4.
48 M. Gopi Krishna, N. Madhu,” Brain computer interface system for mind controlled robot using Bluetooth”, International journal of computer applications, ISSN 0975-8887, Volume: 104, No-15, October 2014, pp 20-23.
49 M. Veeraswamy,” An improved image fusion scheme based on markov’s random fields with image enhancement scheme”, International journal of computer application technology and research, Volume 3, Issue- 1, 2014, pp 29-32.
50 J. Krishna Chaitanya,” Dielectric Loss Tangent Effect On Radiation Characteristics of Patch Antenna”, International Journal of Applied Science and Engineering Research, Volume 2, Issue 3 Impact Factor-0.821.
51 D. Nagajyothi, V. Jyothi,” Comparison of Hybrid Vector Quantizes for Narrow Band Speech Signals,” IJLTEMAS, ISSN 2278-2540, Volume 3, issue 7, July 2014, pp 251-256.
52 P. Rama Devi,” Hybrid QOS-Aware Multi-Path Routing Protocol Using Intelligent Caching In Mobile Ad Hoc Networks ,” ACEEE ,Volume 6,APRIL 2014, pp 55-66.
53 M. Lavanaya,” Gate Count Comparison Of Different 16BIT Carry Select Adders,” international Journal of Advanced Research In Electrical, Electronics And Instrumentation Engineering, ISS 2278-8875, Volume 3, Issue 7, July 2014, pp 10846-10853.
54 M. Gopi Krishna,” Resolution Enhancement of Images Using Dwt and Nonlocal Means Filter,” international journal of graphics & image processing, Volume 4, issue 2, May 2014, pp-153-156.
55 D. Naga Jyothi, V. Jyothi,” Comparison of Hybrid Vector Quantizes For Narrow Band speech Signals,” Proceedings of international conference on innovations in Electronics and communication engineering, July 2014.
56 Madhu Nakirekanti, G. Bhaskar Phani Ram,” Intelligent Energy and Power Management system on WSN,” International Conference on Emerging Research in Computing Information based Communication and Applications 2014, pp 1-4.
57 N. Madhu, G. Bhaskar Phani Ram, J. Krishna Chaitanya, K. Hari Krishna,” Embedded Power And Energy Management System Based On WSN,” International journal of advanced research in electrical, electronics and instrumentation engineering, ISSN 2278-8875,Volume 3 issue 9,September 2014, pp 1-6.
58 T. Ramakrishnaiah,” A DWT-SWT based Image Super Resolution with Multi Surface Fitting,” International Journal of Computer Applications, ISSN 0975 – 8887, Volume 103 No.15, October 2014.pp 9-13.
59 T. Ramakrishnaiah,” GSM Technology Based Wireless Sensor Network for GAS Monitoring International Journal of Science Engineering and Technology Research, ISSN: 2278 – 7798, Volume3, Issue 9, September 2014, pp 2339-2345.
60 Dr H S Jain, “Passive Control of Inrush current in capacitive Load using Auxillary Breakers”, IJAER, International Journal of Applied Engineering Research Volume 2, Issue 6, oct -2014
61 Md Asif, “A Simulink to Improve the Grid Power Quality using Fuzzy Logic Controller on Integration with Wind Energy System”, International Journal of Applied Engineering Research – Volume 2, Issue 6, Nov-2014
62 B. Raja Gopal Reddy, “Nine Level Inverter for Renewable Power Generation System”, International Journal of Computational Engineering Research (IJCER) Oct 2014
63 K Kalyan Kumar, “PV based Buck –Boost voltage /current source inverter using space vector pulse width amplitude modulation technique”, International Journal of Computer Application(IJAC)- Nov-2014
64 P.Harika, “Design And Simulation Of Multi Cell Interleaved Fly Back Converter”, IJREAT International Journal of Research in Engineering & Advanced Technology, Volume 2, Issue 6, Dec-Jan, 2015 ISSN: 2320 – 8791 (Impact Factor: 1.479).
65 K. Deepak and A.V.S.S.K.S. Gupta “Thermal Performance of Geothermal Power Plant with Kalina Cycle System.” (2014) International Journal of Thermal Technologies E-ISSN 2277 – 4114, PP: 61-64, Vol.4, No.2, DOI: http://dx.doi.org/10.14741/ijtt/2014.4.2.04
66 K Deepak, A.V.S.S.K.S. Gupta , T Srinivas , S V Prabhakar Vattikuti , S Deva Prasasd “Investigation of Separator Parameters in Kalina Cycle Systems”, (204) International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, Pages : 496-500, DOI: http://Dx.Doi.Org/10.14741/ Ijcet/Spl.2.2014.93
67 S V Prabhakar Vattikuti, B Venkatesh and K Deepak “Hot Embossed TiO2 Sol-Gel Wave Guide Films for Sensors Applications”, (2014) International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, Pages : 191-193, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.34
68 M. Sreeramulu and K. Deepak “Thermodynamic Modeling of SOFC-GT Combined Cycle Power Plant”, (2014) International Journal of Current Engineering and Technology, (2014) E-ISSN 2277 – 4106, Pages: 510-515, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.96
69 B.Venkatesh, S.V.Prabhakar Vattikuti ,S. Devaprasad “Investigate the Combined Effect of Gear ratio, Helix angle, Face and Module on Bending and Compressive stress of Steel alloy Helical Gear” (2014) Elsevier Journal of Procedia Material Science, Volume 6, 2014, Pages 1865-1870,DOI: 10.1016/j.mspro.2014.07.214
70 S V Prabhakar Vattikuti1*, B. Venkatesh “Wettability of Molten Glass on Water Based Sol-Gel Coatings” (2014) Elsevier Journal of Procedia Material Science, Volume 6, 2014, Pages 1837-1849,DOI: 10.1016/j.mspro.2014.07.21
71 B.Venkatesh, SV Prabhakar Vattikuti and V Mahidhar Reddy “Investigate the Combined Effect of gear ratio, helix angle, face width and module on beam strength and Wear tooth load of Steel alloy Helical Gear” (2014) International Journal of Current Engineering and Technology, Pages 692-695, 2014 P-ISSN 2347 – 5161, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.131
72 B.Venkatesh, S.V.Prabhakar Vattikuti, S.Deva Prasad,V .Kamala and A.M.K.Prasad “Parametric investigation of the combined effect of Gear parameters on Tangential Force and Dynamic Tooth Load of 40 Ni2 Cr1 Mo 28 Steel Helical Gear” (2014) International Journal of Current Engineering and Technology, Pages 687-691, 2014 P-ISSN 2347 – 5161, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.130
73 SV Prabhakar Vattikuti and B. Venkatesh “Nano-Pyramid Structured Coatings for Demanding Tribological Applications” (2014) International Journal of Current Engineering and Technology, Pages 250-254, 2014 P-ISSN 2347 – 5161, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.45
74 SV Prabhakar Vattikuti, B. Venkatesh and K Deepak “ Hot Embossed TiO2 Sol-Gel Wave Guide Films for Sensors Applications” (2014) International Journal of Current Engineering and Technology, Pages 190-192, 2014 P-ISSN 2347 – 5161, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.34
75 Balaji Krushna .P , B.Balakrishna And P.SrinivasaRao “Computational Fluid Dynamics Analysis of Advanced Rocket Nozzle” Pages: 448-452, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.83
76 Srinivasa Reddy. N, Srinivasa Rao. P And Kishen Kumar Reddy. T “Numerical Study of Viscoelastic Behaviour of Nanofluids” (2014) Pages: 466-469, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.86
77 Amala A, Srinivasa Rao P “Aerothermodynamic Study on Clefted Wing” (2014) Pages: 470-474, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.87
78 Jeevan Rao, Bhargav, Krupakar Pasala And Srinivasa Rao “Computational Study of Viscous Flow in a Scramjet” (2014) Pages: 480-484, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.89
79 Bhargav.A, Krupakar Pasala, Anil Kumar.V And Srinivasa Rao.P “Computational Study on Turbulence for a Flow through a Ring” (2014) Pages: 485-487, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.90
80 Shaik Khader Basha , Srinivasa Rao. P , K. Venkata Sheshaiah Naidu And Rajagopal K “Use of EGR in Diesel Engine for Investigating the Performance and Emission Characteristics in Diesel Engine” (2014) Pages: 516-519, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.97
81 P. Srinivasa Rao and K. Rajagopal “CFD Analysis on stratified scavenging system in two stroke IC engines” Indian Journal of Environment and Eco planning. Vol. 14 No.2, 2007(0.156)
82 P. Sampath Rao, M. Manzoor Husain, Perumalla Janaki Ramulu, 2014, “Effect of hydrothermal ageing on Glass Fiber Reinforced Plastic composites exposed to water and salt water”, (2014) International Journal of Current Engineering and Technology, Special Issue 2, 47-53, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.10. ISSN: Electronic-2277 – 4106, Print-2347 – 5161.
83 Perumalla Janaki Ramulu, T. Kartik, P.Swaroop, K. Sadvik, V. Varun, 2014, “Machining of Tungsten Heavy Alloy under Cryogenic Environment”, (2014) International Journal of Current Engineering and Technology, Special Issue 2, 147-151, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.26. ISSN: Electronic-2277–4106, Print-2347–5161.
84 U. Pranavi, P. Venkateshwar Reddy, K. Lavanya, NV Narasimha Charyulu, Perumalla Janaki Ramulu, 2014, “Effect of mechanical properties on Deep drawing formability prediction”, (2014) International Journal of Current Engineering and Technology, Special Issue 2, 303-305, DOI:http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.55. ISSN: Electronic-2277–4106, Print-2347–5161.
85 Sairam Kotari ,S. M. Gangadhar, A. Amala, Poornima, P. Janaki Ramulu, 2014, “Design and Analysis of Crack Stopper”, (2014) International Journal of Current Engineering and Technology, Special Issue 2, 558-562, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.106. ISSN: Electronic-2277–4106, Print-2347–5161.
86 N. V. Narasimha Charyulu, B. Dheeraj Reddy, K. Thulasiswar Reddy, B. Gnanavi, S. Sushmitha, Perumalla Janaki Ramulu, 2014, “Tensile behaviour of welded and un-welded AA 6061 alloy sheet comparing with prediction results”, (2014) International Journal of Current Engineering and Technology, Special Issue 2, 272-276, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.49. ISSN: Electronic-2277–4106, Print-2347 – 5161.
87 D.V.Ramanareddy, B.subbaratnam, G.V.Rao “Prediction of dynamic stability behavior of thin square plates subjected to constant compressive and periodic including constant compressive loads on perpendicular edges” International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 ©2014 INPRESSCO, 01 February 2014.
88 Subba Rao Chamarthi, N. Srinivas Reddy, Manoj Kumar Elipey, D.V Ramana Reddy “Investigation Analysis of Plasma arc Cutting Parameters on the Unevenness Surface of Hardox-400 Material” ,(2014) Journal of procedia engineering (ELSEVIER)
89 P Ramakrishna Reddy “Experimental Investigation on Diesel Engines by swirl induction with different inlet Manifolds International Journal of Current Engineering and Technology”, (2014) DOI:http://dx.doi.org/10.14741/ijcet/spl.2.2014.91E-ISSN 2277 – 4106, P-ISSN 2347 – 5161(Page no 488-492),9th -11th January 2014
90 S Naresh Kuamr “Design and Structural Analysis of Skid Landing Gear” (2014) International Journal of Current Engineering and Technology E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.121
91 S. Naresh kumar“ Investigation of Joints in 3d Spacer Fabric Composites” (2014) International Journal of Current Engineering and Technology E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.52
92 S Maruthi gangadhar Reddy“Design and analysis of crack stopper”.(E – ISSN: 2277-4016, P – ISSN 2347 – 5161).International journal of current engineering and technology
93 Bhargav A, Janaiah Naidu M, “Computational study on effects of shockwave on combustion and injected fuel by unconventional positioning of injectors”, National Conference on Advances in Modelling and Analysis of Aerodynamic Systems (AMAAS), National Institute of Technology(NIT), Rourkela, India, 2013.
94 Bhargav A, Janaiah Naidu M, “Computational study on effects of shockwave on combustion and injected fuel by unconventional positioning of ramp”, World Conference on Applied Sciences Engineering and Technology in GITAM, Hyderabad, India, 2013.
95 Bhargav.A, Krupakar Pasala, Anil Kumar.V, V.Varun, Srinivasa Rao.P, “Computational study on turbulence for a flow through a ring ” in International Journal of Current Engineering and Technology, ISSN 2277-4106, DOI:http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.90
96 Anil Kumar.V, Bhargav.A, R.B.Karthik Aamanchi, “Mechanical characterization of stiched foam sandwich panel by varying thread TPI” in international journal of current engineering and technology, issn 2277-4106, doi: http://dx.doi.org/10.14741/ijcet/spl.2.2014.12
97 H.Jeevan Rao, Bhargav.A, Krupakar Pasala, Srinivasa Rao.P, “Computational study of viscous flow in a scramjet” in International Journal of Current Engineering and Technology, ISSN 2277-4106, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.89
98 Krupakar Pasala, Bhargav.A, H.Jeevan Rao, K.Sreenath Reddy, T.V.Seshaiah Naidu “A Cfd investigation into the flow distribution on a car passing by a truck” in international journal of current engineering and technology, issn 2277-4106, doi: http://dx.doi.org/10.14741/ijcet/spl.2.2014.99
99 V Raghavender, “Computational Aerodynamic Analysis on Store Separation from Aircraft using Pylon”, National Conference on Advances in Modeling and Analysis of Aerodynamic Systems (AMAAS-2013), National Institute of Technology, Rourkela, Odisha, 1-2nd March, 2013.
100 V Raghavender, “Computational Aerodynamic Analysis on Store Separation”, 2nd World Conference on Applied Sciences, Engineering & Technology, 8-9th March,2013, Gitam university, Hyderabad.
101 Raghavender.V , Rambabu Mokati , Anil Kumar.V Ȧ and H.Jeevan Rao “Simulation of Enhanced Ground Proximity Warning System using VHDL”, in International Journal of Current Engineering and Technology, ISSN 2277-4106, Pages : 643-647, DOI:http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.122
102 V. Raghavender, M.Rambabu, G.Shiva Krishna ‘Numerical Simulations of Store Separation from Aircraft’ 5th International and 41st National conference on Fluid Mechanics and Fluid Power (FMFP 2014) at IIT KANPUR, UP. 12th to 14th Dec 2014.
103 V.Raghavender, Rambabu Mokati, Anil kumar.V and H.Jeevan Rao. ‘Simulation of Enhanced Ground Proximity Warning System using VHDL’ International Conference on Advances in Mechanical Sciences Jan 2014 at Vardhaman college of engineering, Hyderabad.
104 A.Amala “Aerothermodynamic Study on Clefted Wing”, International Journal of Current Engineering and Technology, ISSN 2277-4106, Pages : 470-474, DOI:http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.87
105 H. Jeevan Rao Computational Study of Viscous Flow in a Scramjet, International Journal of Current Engineering and Technology, ISSN 2277-4106 Pages : 480-484, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.89
106 H. Jeevan Rao Computational Study on Turbulence for a Flow through a Ring, International Journal of Current Engineering and Technology, ISSN 2277-4106, Pages : 485-487, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.90
107 H. Jeevan Rao A CFD Investigation into the Flow Distribution on a Car passing by a Truck, International Journal of Current Engineering and Technology, ISSN 2277-4106, Pages : 525-528,DOI:http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.99
108 Anil kumar v, journal paper on “mechanical characterization of stitched foam sandwich panel by varying thread tpi” in international journal of current engineering and technology, issn 2277-4106, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.12
109 V. Anil Kumar Journal paper on ” investigation of joints in 3d spacer fabric composites” in international journal of current engineering and technology, issn 2277-4106, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.52
110 V. Anil Kumar Journal paper on “computational study on turbulence for a flow through a ring” in International Journal of Current Engineering and Technology, ISSN 2277-4106, DOI: http://Dx.Doi.Org/10.14741/Ijcet/Spl.2.2014.90
111 V. Anil Kumar Journal paper on ” Reliability Modeling and Performance Analysis of Dumper Systems in ining by KME Method” in International Journal of Current Engineering and Technology, ISSN 2277-4106, DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.46
112 P.Sarah and B.Mamatha, “Effect of Dysposium substitution on the electrical properties of SrBi4Ti4O15 ceramics.”, 2014 Materials Chemistry and Physics 147, 375-381, 2014. DOI: 10.1016/j.matchemphys.2014.03.036
113 P.Sarah and Rizwana, “Dielectric, Ferroelectric and Piezoelectric Properties of Sr0.8Na0.1Nd0.1Bi4Ti4O15 Prepared by Sol Gel and Solid State Technique” Ferroelectrics 467, 181-193, 2014 DOI: 10.1080/00150193.2014.932616
114 P.Sarah and Rizwana, “Study of Effect of Doping on Grain and Grain Boundary Parameters of Sr1−2xNaxNdxBi4Ti4O15 (x = 0−0.5) Ceramics Using Impedance Spectroscopy” Ferroelectrics 467,1, 146-157, 2014 DOI: 10.1080/00150193.2014.932611
115 Praveen Kumar “ Techniques of Vocabulary Competency in English Language Learning” , Educational Quest- An International Journal of Education and Applied Social Sciences, Year : 2014, Volume : 5, Issue: 2, pp 109-113 ISSN : 0976-7258, Article DOI : 10.5958/2230-7311.2014.00003.8
116 D. Srinivas Reddy, G. Sreedhar Sarma, K. Govardhan “Numerical study of mhd, thermal radiation free covection heat and mass transfer from vertical surfaces in porous media considering soret and dufour effects” international journal of heat and technology, volume 32 no 12 (2014) 179-184
117 D.Srinivas Reddy, G.Sreedhar sarma, K.Govardhan “Effect of viscous dissipation, soret and dufour effect on free convection heat and mass transfer from vertical
surface in a porous medium”
118 S P Kishore, N V S L Narasimham, A Ramakrishna Prasad, “Scope of Nanotechnology in Radiation Treatment Planning” 2nd International Conference on Nanomaterials and Technonologies, CNT-2014, 17-18 October, 2014
119 K. Ashok, B. Mamatha and P. Sarah, “Electrical Properties of Lead Free Sr0.8Na0.1Sm0.1Bi4Ti4O15 Ceramics” 2nd International Conference on Nanomaterials and Technonologies, CNT-2014, 17-18 October, 2014
120 K.Venkateswarlu, N.Ramesh babu, R.Swapna, “Effect of electrolyte concentration on properties of plasma electrolytic oxidation coatings on CpTi” 2nd International Conference on Nanomaterials and Technonologies, CNT-2014, 17-18 October, 2014
121 Rizwana, P. Sarah, “Structure and properties of sol gel fabricated Na0.5Nd0.5Bi4Ti4O15 ceramics” 2nd International Conference on Nanomaterials and Technonologies, CNT-2014, 17-18 October, 2014
122 R. Swapna, K. Venkateswarlu, M. C. Santhosh Kumar, Heat Treatment Impact on the Properties of Na and N Dual Doped ZnO Thin Flms by Spray Pyrolysis, 2nd International Conference on Nanomaterials and Technonologies, CNT-2014, 17-18 October, 2014
123 S. Shashi Devia ,S.Narender Reddyb, A.Sadananda Chary, Electrical and Dielectrical Properties of Ba(NO3)2 -0.91KNO3 : CeO2 Solid Electrolyte System” 2nd International Conference on Nanomaterials and Technonologies, CNT-2014, 17-18 October, 2014
124 Y. Prakash (Assistant professor), “Dominance of labour and capital: An outlook of Industrial Relation” 2014 International journal of advanced research in computer science and management studies.
S.No. PAPERS PUBLISHED
1 Narasimha Prasad L V, Prudhvi Kumar Reddy K and Naidu M M, “An Approach to Prediction of Precipitation Using Gini Index in SLIQ Decision Tree,” IEEE International Conference on Intelligent Systems, Modeling and Simulation, 2013, pp.56-60.
2 Narasimha Prasad L V and Naidu M M, “An Efficient Decision Tree Classifier to Predict Precipitation Using Gain Ratio,” International Journal on Soft Computing and Software Engineering, 2013.
3 Narasimha Prasad L V, Prudhvi Kumar Reddy K and Naidu M M, “A Novel Decision Tree Approach for the Prediction of Precipitation Using Entropy in SLIQ,” IEEE International Conference on Computer Modeling and Simulation, 2013, pp. 209-216.
4 Narasimha Prasad L V, JVR Ravindra, Pandurangaiah Yagateela, “A Novel Analytical Model for Analysis of Delay and Crosstalk in Non Linear RLC Interconnects for Ultra Low Power Applications,” IEEE International Conference on Computer Modeling and Simulation, 2013, pp. 798-802.
5 P.Govardhan, “Content Based Trusting in Social Networking Systems,” Indian Journal Research, Volume 2, 2013.
6 P.Govardhan, “Customized Concept learning in Image Search from Photo Sharing Websites,” Indian Journal Research, Volume 2, 2013.
7 H.Venkateswara Reddy and S.Viswanadha Raju, “N-Nodeset Importance Representative based Outlier Detection for Categorical Data,” International Journal of Engineering and Computer Science, Volume 2, 2013, pp. 259-264.
8 R. Madana Mohana, A. Rama Mohan Reddy and K. Prudvi Kumar Reddy, “Fish Stock Prediction Using Data Mining and Image Processing Techniques,” International Conference on Recent Trends in Computing and communication Engineering, 2013.
9 Madana Mohana R, Suresh K, Rama Mohan Reddy A and Subramanyam A, “Improved FCM Algorithm for Clustering on Web Usage Mining,” IEEE International Conference on Computer and Management,” 2013, pp. 1-4.
10 Muralidhar Mourya and P Krishna Rao, “Selecting Attribute to Stand out in the Competitive World,” Internal Journal of Scientific and Research Publication, Volume 3, 2013.
11 G S Prasad Reddy, “Address Routing Scalability of Floating Cloud Internetworking Model by Using Tier Based Aggregation,” International Conference on Mathematics, Statistics and Computing, 2013.
12 D Raman and V Chandra Sekhar, “Monitoring the Node Due to the Effect of Packet Droppers and Modifiers in Wireless Sensor Networks,” International Journal of Scientific Research, Volume 2, 2013.
13 D Raman and Y Srinivas Reddy, “A Square Root Topologies To Find Unstructured Peer-To-Peer Networks,” International Journal of Computer Science and Management Research, Volume 2, 2013.
14 D Raman and Bojja Vamshi Krishna, “Ensuring Security Services for Data Storing and Data Sharing in Cloud Computing,” International Journal of Science and Research, Volume 2, 2013.
15 A Raul, S K Prasanth, B Suresh Kumar and G Arun “Detection of Intruders and Fledding in VOIP using IDS, Jacobson Fast and Hellinger Distance Algorithms,” International Organization of Scientific Research, Volume 2, 2013.
16 Thulasi Bikku and N Sambasiva Rao, “Review on Security Issues of Distributed Datamining using Multi Agency System,” International Journal of Information, Volume 3, 2013.
17 K Srinivasa Reddy and A Bhanu Prasad, “Automatic Vehicle Detection and Tracking for Event Analysis in Intelligent Aerial Surveillance Using Dynamic Bayesian Networks,” International Journal of Engineering Research and Technology, Volume 2, 2013.
18 R Rakesh Kumar and A Bhanu Prasad, “Horizontal Aggregations in SQL by Using Clustering as a Mixture Gaussians,” International Journal of Engineering and Technology, Volume 2, 2013.
19 Venkata Gopal Rao S and Bhanu Prasad A, “Space and Cousine Similarity Measurers for Text Document Clustering,” International Journal of Engineering Research and Technology, Volume 2, 2013.
20 G Guru Brahmam and A Bhanu Prasad, “Support Vector Mechanism Based Citation Parser,” International Journal of Engineering Research and Technology, Volume 2, 2013.
21 G Vijay Kumar and A Krishna Chaitanya, “Organizing User Search histories into Relevant Query Groups by Using Em-Algorithm,” Indian Journal of Research, Volume 2, 2013
22 Madhuri C and A Krishna Chaitanya, “A New Distributed Accountability and Auditability for Data Storage in Cloud Computing,” International Journal of Mathematics and Computer Research, Volume 1, 2013.
23 A Kavitha and N Pandu Ranga Reddy, “Performance analysis of Space Time Frequency Coding for Mimo OFDM Systems,” International Journal of Advanced Engineering Technologies, Volume 1, 2013.
24 C Padmini, G Bhaskar Phani Ram and Venkat  B Prasanth, “Wireless Measurement System using Zigbee Transmission Implemented on TES,” International Journal of Advances in Electrical and Electronics Engineering, Volume 2,  2013.
25 Venkat B Prasanth, C Padmini, EIiyaz Mohammed and G Bhaskar Phani Ram, “An innovative VLSI Algorithm Design Technique to Reduce Leakage Current in CMOS VLSI Circuits,” International Journal of Advances in Electrical and Electronics Engineering, Volume 1, 2013.
26 M Veera Swamy, “Medical Radio Graphs Compression Using Neural Networks and Haar Wavelet,” World Conference on Applied Sciences, Engineering and Technology, 2013.
27 Kanugadda Peeter Samson and T Rama Krishnaiah, “Multi Scale Approximation Decomposition for Image Resolution Enhancement,” International journal of Advanced Engineering Technologies, Volume 1, 2013.
28 M Devadas and K Latha, “Design of High Performance on Chip bus OCPIP Protocol with Advanced Bus Functionalities,” International Journal of Advances in Electronics Engineering, Volume 1, 2013.
29 M Srilatha and P L Deepthi, “Segmentation Techniques for Image Processing,” World Conference on Applied Sciences Engineering and Technology, 2013.
30 P L Deepthi, K Swathi and G Anitha, “Motion compensation Algorithms for Radar Image Processing,” World Conference on Applied Sciences Engineering Technology, 2013.
31 P L Deepthi, K Swathi and G Anitha, “An Efficient Role of Multicore Embedded Processors MCEP in Monitoring and Controlling the Train Parameters,” World Conference on Applied Sciences Engineering Technology, 2013.
32 M Srilatha and P L Deepthi, “Segmentation Techniques for Image Processing,” World Conference on Applied Sciences Engineering Technology, 2013.
33 M Hari Babu, E Rama Krishna and A M Prasad, “Battery Fed Brushless DC Motor Drive Controlled by Resonant Pole Inverter,” International Conference on current trends in Engineering and Management, 2013.
34 S V Prabhakar Vattikuti, N Srinivas Reddy, T V Seshaiah Naidu, K Mani Kumari, K J Ma, and H H Chien, “Nano Structured Coatings Via Environment Friendly Deposition Technique for Demanding Tribological Applications,” World Conference on Applied Sciences Engineering and Technology, 2013.
35 M Vishnu Vardhan and M Suresh Kumar, “Seismic Analysis of Electrical Panel,” International Journal of Mechanical Engineering Research, International journal of Advanced Engineering Technologies, Volume 3, 2013.
36 B Venkatesh, V Kamala and A M K Prasad, “Variation of Dynamic Tooth Load of Helical Gear for Marine Applications,” International Conference on Recent and Development Prospectus on Engineering and Technology, 2013.
37 C Labesh Kumar, S Ravinder Reddy, K Sai Ram and P. Janaki Ramulu, “A Statistical Study on Supply Chain in Iron foundry,” International Symposium on Advances in Automative Technology, 2013,  pp. 33-35.
38 S Ravinder Reddy, N Jeevan Kumar, C Labesh Kumar and P Janaki Ramulu, “High Velocity impact on Compsite Panels made of Fiber Reinforced Plastics using FEM analysis,” International symposium on Advances in Automative Technology, 2013,     pp. 36-41.
39 B.Subbarathnam, G.Venkateswar Rao, D.V. Ramana Reddy, ”Dynamic instability analysis of This Square Plates Subjected to Constant Compressive and Periodic including Constant Compressive loads on Perpendicular Edges,” World Conference on Applied Sciences, Engineering & Technology, 2013.
40 V Raghavender and R Khannan, “Computational Aerodynamic Analysis on Store Separation from Aircraft using Pylon,” National conference on Advances in Modeling and Dynamics of Aerodynamic Systems, 2013.
41 Bhargav A and M Janaiah Naidu, “Computational Study on Effects of Stock Wave on Combustion and Injected Fuel by Unconventional Positioning of Injectors,” National conference on Advances in Modeling and Dynamics of Aerodynamic Systems, 2013.
42 Manoj M, Laxman N, Raghava Rani, and Akshay T, “Regionalisation using Flood Parameters for Prediction at Ungauged Basins,” National Conference on Sustainable Water Resources Planning Management and Impact of Climate Change, 2013.
43 Dr. P Sarah, “Effect doping on Impedance of Sr1-2xNaxNdxBi4O15 (x=0-0.5) Ceramics,” International Conference on Materials and Manufacturing Technology, 2013.
44 S M Jyothirmayee, “Multimedia: A Boom to ESL Learners to Acquire the Language with ease,” International Post Graduate Conference, 2013.
45 S K Prasanth, K. Sunitha and V. Tejeswini, “Ensuring Availability and Integrity of Data Storage in Cloud Computing,” Indian Journal of Research, Volume 2, 2013,                  pp. 119-122.
46 S K Prasanth, K. Sunitha and V. Tejeswini, “Privacy Preserving and Public Auditing Service work Data Storage in Cloud Computing,” Indian Journal of Research, Volume 2, 2013.
47 S K Prasanth and B Arun, “Cloud Computing Security using Secrete Sharing Algorithms,” Indian Journal of Research, Volume 2, 2013.
48 S K Prasanth and K Uday Kumar “Security for Bulk Data in Cloud,” Indian Journal of Research, Volume 2, March 2013.
49 P Subhadra and A Sai Kumar, “Enhancing and Constructing two Way Matrix Embedding for efficient embedding,” International Journal of Mathematics and Computer Research, Volume 1, 2013.
50 P Subhadra and C H Srinivas, “Assured Digital Signature for Data Trustworthiness,” International Journal of Computer Science and Management Research, Volume 2, 2013.
51 P Subhadra and V Laxman, “Building Network Packet Buffering High Band width Switches and Routers,” International Journal of Computer Science and Management Research, Volume 2, 2013.
52 P Subhadra and A Sai Kumar, “User Authentication to provide Security against Online Guessing Attacks,” International Journal of Computer Science and Management Research, Volume 2, 2013.
53 Ch.Srikanth, N.Sambasiva Rao and T.Vishnu Vardhan Reddy, “Coordination in Large-Scale Software Development: Helpful and Unhelpful Behaviors,” International Journal of Computer Science and Management, Volume 2, 2013.
54 T.Vishnu Vardhan Reddy, N.Sambasiva Rao and Ch.Srikanth, ”Survey on Bug Prediction Based on Features Selection,” International Journal of Computer Science and Management, Volume 1, 2013.
55 Venkata Gopala Rao S and Bhanu Prasad A, “Space and Cosine Similarity Measures for Text Document Clustering,” International Journal of Engineering Research and Technology, Volume 2, 2013.
56 G.Guru Brahmam and A.Bhanu Prasad, “Support Vector Mechanism Based Citation Parser,” International Journal of Engineering Research and Technology, Volume 2, 2013.
57 Narasimha Prasad L V, Kishor Kumar Reddy C and Naidu M M, “An Entropy Based Elegant Decision Tree Classifier to Predict Precipitation,” IEEE International Conference on Artificial Intelligence, 2013.
58 Anisha Ravinder, Prudhvi Kumar Reddy K and Narasimha Prasad L V, “Detection of Wavelengths for Hail Identification Using Satellite Imagery of Clouds,” IEEE International Conference on Computational Intelligence, Communication Systems and Networks, 2013, pp. 205-211.
59 Ch Priyanka and P Govardhan, “Customized Concept Learning In Image Search From Photo Sharing Websites,” Indian Journal of Research, Volume 2, 2013.
60 H. Venkateswara Reddy, S. Viswanadha Raju, B. Suresh Kumar and C. Jayachandra,  “An Emerge Approach In Inter Cluster Similarity For Quality Clusters,” International Journal Of Engineering And Technology, Volume 5, 2013, pp. 1843-1852.
61 Chinni Jayachandra and H.Venkateswara Reddy, “Iris Recognition Based On Pupil Using Canny Edge Detection and K-Means Algorithm,” International Journal Of Engineering and Computer Science, Volume 2, 2013, pp. 221-225.
62 H Venkateswara Reddy and B Suresh kumar, “Automated Surveillance System And Data Communication,“ International Organization of Science and Research Journal of Computer Engineering, Volume 12, 2013, pp. 31-38.
63 R. Madana Mohana, A. Rama Mohan Reddy and K. Prudvi Kumar Reddy, “Fish Stock Prediction Using Data Mining and Image Processing Techniques,” International Journal of Advances in Computer Science and its Applications, Volume 3, 2013.
64 M L Prasanthi and E Sateesh, “Classic Outlier Detection from Web Clusters Using Dissimilarity Measure,” Indian Journal of Research, Volume 2, 2013, pp. 98-102.
65 M L Prasanthi and B Sruthi Patil, “Modern Approaches For Detecting Data Leakage Problems,” International Journal of Engineering and Computer Science, Volume 2, 2013, pp. 395-399.
66 M L Prasanthi and Devi Srinivas, “Implementation of Knowledge Based Authentication System Using Persuasive Cued Click Point,” International Journal of Mathematics and Computer Research, 2013, pp.15-19.
67 P Subhadra and A Sai Kumar, “User Authentication To Provide Security Against Online Guessing Attacks,” International Journal of Engineering and Computer Science, Volume 2, 2013.
68 V.Chandra Sekhar and D.Raman, “Effectiveness in Packet Data Transmission In Wireless Networks: A Foreword Approach,” International Journal Of Computational Intelligence and Information Security, Volume 1, 2013.
69 S.Venu Gopal, Dr.N.Sambasiva Rao, S.K. LokeshNaik and T.Jagadeeswari, “Avoiding Loss of Data While Sharing in Structured Peer To Peer Network Overlay Modeling,” Indian Journal Of Research, Volume 3, 2013.
70 T.Jagadeeswari, N.Harini and C.Satya Kumar, “Distance In Agriculture Datasets Identification of Outliers by Cook’s,” International Journal Of Engineering and Computer Science, Volume 2, 2013, pp. 2045-2051.
71 T.Jagadeeswari, B.Mahalakshmi and N.Anusha, “Rare Event Discovery and Event Change Point in Biological Data Stream,” International Journal of Engineering Research and Technology, 2013.
72 T.Jagadeeswari, N.Harini and C.Satya Kumar, “Identification of Outliers By Cook’s Distance in Agriculture Datasets,” International Journal Of Engineering and Computer Science, 2013.
73 Anvesh, V Bhavya and B Suresh Kumar, “Hyper Graph Deviation Comparison & Cluster Relation in Categorical Data,” International Organization of Scientific Research, Volume 12, 2013, pp. 101-106.
74 Phani Prasad J and Muralidhar Mourya, “A Study on Market Basket Analysis using a Data Mining Algorithm,” International Journal of Emerging Technology and Advanced Engineering, June 2013.
75 J.Phani Prasad and Murlidher Mourya, “Modelling for Soft Drink Machine using UML,” International Journal of Scientific Research in Computer Science Applications and Management Studies, Volume 2, 2013.
76 Narasimha Prasad L V, Kishor Kumar Reddy C and Anisha P R, “Remote Sensing of Snow Wrap Using Clustering and Wavelet Transform”, IEEE International Conference on Human Computer Interaction, 2013.
77 Narasimha Prasad L V, Krishna Rao Patro E and Naidu M M, “A Gini Index Based Elegant Decision Tree Classifier to Predict Precipitation,” IEEE Asia International Conference on Mathematical/Analytical Modeling and Computer Simulation, 2013,   pp. 46-54.
78 Narasimha Prasad L V and Naidu M M, “Gain Ratio as Attribute Selection Measure in Elegant Decision Tree to Predict Precipitation,” IEEE EUROSIM Congress on Modeling and Simulation, 2013, pp. 141-150.
79 RajKumar G, Narasimha Prasad L V and Padmaja B, “Monitoring and Extracting Abnormalities in Land Surface Temperature Images for Automatic Identification of Forest Fires,” IEEE European Modeling Symposium, Manchestter, 2013, pp. 202-206.
80 Shankar Murthy P, Narasimha Prasad L V and Kishor Kumar Reddy C, “Analysis of Magnitude for Earthquake Detection Using Primary Waves and Secondary Waves,” IEEE International Conference on Human Computer Interaction, 2013.
81 Naveen Dondapati, Prudhvi Kumar Reddy K and Narasimha Prasad L V, “Estimating Acidity in Precipitation Using Sulphur Dioxide Satellite Imagery,” International Journal of Soft Computing and Software Engineering, USA, 2013.
82 N.Shravani and Dr P Govardhan, “Detecting Spam Tags Against Collaborative Unfair Through Trust Modeling,” International Journal of Scientific Research, Volume 2, pp. 16-19.
83 H.Venkateswara Reddy, S.Viswanadha Raju and Pratibha Agrawal, “Data labelling method based on cluster purity using relative rough entropy for categorical data clustering,” IEEE International conference on Advances in Computing, Communications and Informatics, 2013.
84 H.Venkateswara Reddy, S.Viswanadha Raju, Rama Subba Reddy and Ramana Naik, “Clustering Categorical Time-Evolving data using Concept -Drift Detection based on Rough Entropy,” International conference on Advanced Computing Methodologies, 2013.
85 Chinni Jayachandra, H.Venkateswara Reddy, B.Suresh Kumar and B.Sruthi, “A Robust Approach in Iris Recognition for Person Authentication,” International Journal of Scientific Research, 2013, pp. 59-67.
86 Ch.Divya and Dr P.Govardhan, “Premium Customer Authentication by Using Third Generation Packet Network,” International Journal of Scientific Research, 2013,         pp. 110-113.
87 T.Sandeep and P.Subhadra, “Jamming Anticipation and Convolution through Immaculate Hiding Process of Packets,” International Journal of Scientific Research, 2013, pp. 57-59.
88 A.Sai Kumar and P.Subhadra, “Enhancing a Dynamic user Authentication scheme over Brute Force and Dictionary attacks,” International Journal of Scientific Research ,2013, pp. 20-24.
89 V.Tejaswini, S.k.Prashanth, Dr. N.sambasiva Rao and C.Satya kumar, “Privacy and Integrity Preserving in Cloud Storage Devices,” International Journal of Scientific Research, 2013, pp. 30-33.
90 A.Annapurna, Sheena Mohammed and D.Madhuri, “Data link layer security Issues,” International Journal of Computer Science and Engineering Technology, Volume 4, 2013.
91 Sheena Mohammed, D Madhuri and A Annapurna, “Distributed Denial Of Service Overview and Prevention,” International Journal of Computer Engineering and Applications, Volume 4, 2013.
92 Maduri D, Mohammed Sheena and Annapurna, “Secure And Service Oriented Framework For Wimax Network,” International Journal of Applied Research on Information Technology and Computing, Volume 4, 2013.
93 Anupama Tammi, V.Bhavya “Analysis of High Dimensional Data & Study on Classification Mining Technique,” International Journal of Electronics and Computer Science Engineering, Volume 2, 2013.
94 Angel Mary and N.Sambasiva Rao, “CPV: Open Source Software Survivability Analysis by Communication Pattern Validation Approach,” International Journal of Scientific Research, Volume 1, 2013.
95 R Rakesh Kumar and A Bhanu Prasad, “Horizontal Aggregations in SQL by Using Clustering as a Mixture Gaussians,” International Journal of Scientific Research, Volume 2, 2013.
96 G Vijay Kumar and A Krishna Chaitanya, “Organizing User Search Histories into Relevant Query Groups by Using Em Algorithm,” International Journal of Scientific Research, Volume 2, 2013, pp. 116-118.
97 B Arun and SK Prashanth, “Cloud Computing Security Using Secret Sharing Algorithm,” International Journal of Scientific Research, Volume 2, 2013.
98 Bhanu Prakash Goud and SK Prashanth, “Analyzing And Ranking Web Services Based On Multi Criteria Matching,” International Journal of Scientific Research, Volume 2, 2013.
99 SK Prashanth, Dr. N Sambasiva Rao, K Sunitha and V Tejaswini, “Enabling integrity for the compressed files in cloud server,” International Journal of Scientific Research, 2013, pp.01-05.
100 Venkata Gopala Rao S, A Bhanu Prasad, “Correlation Preserving Indexing Based Text Clustering,” International Journal of Scientific Research, Volume 3, 2013, pp. 27-30.
101 G Guru Brahamam and A Bhanu Prasad, “An Effective Citation Metadata Extraction Process based on Bibpro Parser,” International Journal of Scientific Research, 2013,   pp. 12-16.
102 A Krishna Chaitanya and Mounika B, “Pattern Mapping Approach for Detecting Xss Attacks In Multi-Tier Web Applications Using Double Guard,” International Journal of Scientific Research, Volume 12, 2013, pp. 19-23.
103 Anisha P R, Kishor Kumar Reddy C and Prashanth SK, “Ten Security Concerns to be kept in mind while Accessing Cloud,” International Journal of Computers Networks, Volume 3, 2013, pp. 185-194.
104 K Anvesh, I Srikanth and K Krishna Veni, “Rebirth Approach of Multiple Path System in Wireless MANET’S ,” International Journal of Computers Networks, Volume 3, 2013, pp. 1017-1025.
105 P.Janaki Ramulu, R.Ganesh Narayanan and Satish V. Kailas, “Influence of Shoulder Diameter and Plunge Depth on Forming Limit of Friction Stir Welded Sheets,” International Journal of Advanced Manufacturing Technology, 2013.
106 P.Janaki Ramulu, R.Ganesh Narayanan and Satish V. Kailas, “Influence of tool rotation speed and welding speed on forming limit of friction stir welded sheets,” Journal of Mechanical Engineering Science, 2013.
107 P.Janaki Ramulu and R.Ganesh Narayanan, “Experimental evaluation and prediction of forming limit of FSW blanks made of AA 6061 T6 sheets at different weld orientations and weld locations,” Journal of Materials Science and Engineering Technology, 2013, pp. 527–540.
108 S.Ravinder, S.Prakash, S.V. Vijay Kumar Raju, S.Raju, P.Janaki Ramulu and S.Narendar, “Design and analysis of pressure vessel assembly for testing of missile canister sections under differential pressures,” Procedia Engineering, Elsevier, 2013, pp. 1040-1047.
109 Perumalla Janaki Ramulu, A.SatishBabu, R.Ganesh Narayanan, S.Deva Prasad, and       P. Srinivasa Rao, “The Behavior of Friction Stir Welded (FSW) sheets of AA6061-T6 during in-plane stretching test,” Procedia Engineering, Elsevier, 2013, pp. 862-867.
110 P.Janaki Ramulu and R.Ganesh Narayanan, “Sensitivity Analysis of Mechanical and Geometric Properties for Weld Zone Representation of Friction Stir Welded Blanks during Formability Prediction,” International Journal of Machining and Forming Technologies, Volume 5, 2013.
111 P.Janaki Ramulu and R.Ganesh Narayanan, “Influence of shoulder diameter, plunge depth, welding speed, rotational speed on the tensile behavior of friction stir welded AA 6061-T6 sheets,” International Journal of Testing and Evaluation, 2013, pp. 1-13.
112 Venkat Rao and M.Rajasekhar, “High Volume Fly Ash (HVFA)-a boon for preventing reinforcement corrosion,” International Journal of Civil Engineering and Applications, 2013.
113 N.Venkat Rao, M.Rajasekhar, “Performance Evaluation and Efficiency Assessment of a waste water treatment plant a case study,” International Journal of Engineering Research and Technology, 2013.
114 Mohd Mujeebuddin Ahmed, N.Venkat Rao and Mohd Abdul Baseer, “A study of investigation on increased stiffness of Diaphragm in High rise building under seismic load,” International Journal of Current Engineering and Technology, 2013.
115 B.Venkatesh, S.V.Prabhakar Vattikuti, D.V.Ramanareddy, S.Naresh Kunar, V.Kamala and AMK Prasad, “Effect of bending stress on steel alloy of Helical Gear for High Speed applications,” International Journal of Mechanical and Civil Engineering, Volume 6,  2013, pp. 16-25.
116 B.Venkatesh, S.V.Prabhakar vattikuti V.Kamala and A.M.K.Prasad, “Effect of Compressive Stress on Steel Alloy of Helical Gear for Marine Applications,” International Journal on Mechanical Engineering and Robotics, Volume 1, 2013,        pp. 113-117.
117 B.Venkatesh, S.V.Prabhakar vattikuti, V.Kamala and A.M.K.Prasad, “Effect of Compressive Stress on Steel Alloy of Helical Gear for Marine Applications,” International Conference on Mechanical and Industrial Engineering, 2013.
118 S V Prabhakar Vattikuti and B Venkatesh, “Interaction of    Molten Glass on Water Based Sol-Gel Coatings,” International Conference on Nano Science, 2013.
119 B.Venkatesh, V.Kamala and A.M.K.Prasad, “Variation of Dynamic Tooth Load of Helical Gear for Marine Applications,” IEEE International Conference on Research and development Prospects on Engineering and technology, 2013.
120 K.L.Uday Kiran, G.Chandramohan Reddy, A.M.K Prasad, B.Venkatesh, “Effect of Current on Surface roughness Parameters and MRR in Sink EDM Process,” International conference on Advancements in Engineering and Management, 2013, pp. 27-28.
121 B.Venkatesh, V.Kamala, A.M.K.Prasad, “Variation of Wear Strength of Tooth of Steel Gear for High Speed Applications,” International Conference on Advances in Material Processing and Characterization, 2013, pp. 901-904.
122 B.Venkatesh, S.V.Prabhakar Vattikuti, D.V.Ramanareddy, S.Naresh Kunar, V.Kamala and AMK Prasad,” Effect of Bending Stress on Steel Alloy of Helical Gear for High Speed Applications,” National conference on Recent Developments in Mechanical Engineering, 2013.
123 Ch.Venkata Reddy, K.Vijaya Kumar, S.V.Prabhakar Vattikuti and Ravikumar, “Preparation and Photoluminescence of Cr3+ Doped β- BaB2O4 Nanopowder by       Co-precipitation Method, Physica B-Condensed Matter,” Elsevier Journal, Volume 429, 2013, pp.18-23.
124 G.V.S.S.Sarma, Ch.VenkataReddy, S.V.Prabhakar Vattikuti, P. Narayana Murthy and Ravikumar “Spectral Investigations of Mn2+doped Zn3 (BO3)2 Nanopowder,” Journal of Molecular Structure, Volume 1048, 2013, pp.64-68.
125 S V Prabhakar Vattikuti, N.Srinivasa Reddy, T.V.Seshaianaidu, K.Mani Kumari, K.J.Ma and H.H.Chien, “Nanostructured Coatings via Environment Friendly Deposition Technique for Demanding Tribological Applications,” World Conference on Applied Science, Engineering and Technology, 2013, pp.54-56.
126 S V Prabhakar Vattikuti and B Venkatesh, “Interaction of Molten Glass on Water Based Sol-Gel Coatings,” International Conference on Nano Science, Nano Engineering and Applications, 2013, pp. 48-51.
127 Subbarao Chamarthi, N.Srinivasa Reddy, Manoj Kumar Elipey and D V Ramana Reddy “Investigation Analysis of Plasma arc Cutting Parameters on the Unevenness Surface of Hardox-400 material,” Procedia Engineering, Elsevier, 2013.
128 Subbarao Chamarthi, N.Srinivasa Reddy and G.Ravi Chandra, “Experimental Investigation on the Performance Improvement of Biogas Plant,” International Journal of Engineering Research and Applications, Volume 3, 2013, pp.1218-1223.
129 Subbarao Chamarthi, N.Srinivasa Reddy and Ch Chandra Mouli, “Investigation Analysis on Design and Modification of a Conventional Floating Dome Digester,” International Journal of Computational Engineering Research, 2013.
130 Subbarao Chamarthi, Dr. Purnanand V Bhale, N.Srinivasa Reddy and Ch Chandra Mouli, “Laboratory Scale Experiments for Biogas Production using Gas Chromatography Analysis,” International Organization of Scientific Research, 2013.
131 Subbarao Chamarthi, N.Srinivasa Reddy, D V Ramana Reddy and Ch Chandra Mouli, “Investigation Analysis on Different Operational Parameters of Solar Air Heaters-A Review,” National Conference on New & Renewable Energy Technologies, 2013.
132 Subbarao Chamarthi, N.Srinivasa Reddy, D V Ramana Reddy and Ch Chandra Mouli,     “Gas Chromatography Analysis for the Performance Improvement of the Biogas plant” International Conference on Sustainability, Energy and Environment, 2013.
133 K.Deepak, “Analysis of Separation Process in Ammonia-Water Power Generation Systems,” International Conference on Advances in Thermal and Energy Systems, 2013.
134 Sreedhar V, Nishanth M, Narendar Kumar D and Krishna Reddy K, “Design of Flipping Four Blade Vertical Axis Wind Turbine,” World Conference on Applied Sciences, Engineering & Technology, 2013.
135 V.Sreedhar, E.Manoj Kumar and M.Suresh Kumar, “Increasing the Drag Force of Vertical Axis Wind Turbine Blade By Changing the Position of Blade During its Operation,” International conference organized by VIGNAN University, 2013.
136 B.U.V Prashanth and Y.Pandurangaiah, “Generation of Secret Key for Physical Layer to Evaluate Channel Characteristics in Wireless Communications,” International Conference on Emerging Research In Computing, Information, Communication and Applications, 2013, pp. 251-255.
137 G.Kalyan Chakravarthy and Y.Pandurangaiah, “Area Delay Estimation by Concurrent Optimization of FPGA Architecture Parameters using Geometric Programming,” International Journal of Computer Applications, Volume 82, 2013.
138 K.Narasimha Rao, J.V.R.Ravindra and Y. Pandurangaiah, “Power Aware and Delay Efficient Hybrid CMOS Full-Adder for Ultra Deep Submicron Technology,” IEEE European Modeling Symposium on Mathematical Modeling and Computer Simulation, 2013.
139 R.Gangadhar Reddy, J.V.R.Ravindra and K.Harikrishna, “Design of Ultra Low power Full Adder Using Modified Branch Based Logic Style,” IEEE European Modeling Symposium on Mathematical Modeling and Computer Simulation, 2013.
140 Vemula Harini and S.Rajendar, “Design, Validation and Correlation of Characterized Sodium Modules Supporting Ddr3 Memory Interface,” Journal of Electronics and Communication Engineering, Volume 6, 2013, pp. 01-11.
141 S.Rajendar, “Study of Crosstalk Noise and Delay Modelling for Rc On-Chip Interconnects,” National Conference on Nano Materials and Technologies, 2013,      pp. 95-102.
142 A.Vijaya Lakshmi, “Implementation of Product Reed Solomon Codes for Multi Level Cell Flash Controller,” Journal of Electronics and Communication Engineering, Volume 6, 2013, pp. 01-11.
143 Krishna Chaithanya, “Covarience Estimation and Performance of Satellite Imaginary Data using Smt,” International Journal of Advances in Engineering, Electrical and Electronics Engineering, Volume 3, 2013.
144 B.MOUNIKA and Sangeetha Singh, “Area And Power Efficient Self Checking Modulo 2n +1 Multiplier,” International Journal of Computer Applications, Volume 76, 2013.
145 K.Ranjitha Pragnya, G.Harshini and J .Krishna Chaithanya, “Wireless Home Monitoring for Senior Citizens using Zigbee Networks,” International Journal of Advances In Engineering Electrical & Electronics Engineering, Volume 3,  2013.
146 Kanugadda Peter Samson and T.Ramakrishnaiah, “Multi Scale Approximation Decomposition for Image Resolution Enhancement,” International Journal of Advanced Engineering Technologies, Volume 1, 2013.
147 C Padmini, G Bhaskar Phani Ram and Venkat B Prasanth, “Wireless Measurement System Using Zigbee Transmission Implemented using Tes,” International Journal of Advances in Electrical and Electronics Engineering, Volume 2, 2013, pp.151-157.
148 M Veeraswamy, “Medical Radiographs Compression Using Neural Networks and Haar Wavelet,” World Conference on Applied Sciences, Engineering and Technology, 2013.
149 M Veeraswamy and Aravind Babu, “An Improved Image Fusion Scheme Based on Markov Random Fields with Image Enhancement Scheme,” World Conference on Applied Sciences, Engineering and Technology, 2013.
150 M Veeraswamy and Sorupaka Manmeeth, “Adaptive Steganalysis of Least Significant Bit Replacement in Grayscale Natural Image,” World Conference on Applied Sciences, Engineering and Technology, 2013.
151 K.Sridhar Reddy, M.Nagarjuna and H.Shravan Kumar, “An Efficient Low Power Viterbi Decoder Design Using T- Algorithm,” International Journal of Computer Applications, 2013, pp. 34-39.
152 M. Varun, M.Nagarjuna and M.Vasavi, “Design Of High Speed Modulo 2 N +1 Adder,” International Journal of Computer Applications, 2013, pp. 5-11.
153 S.Rajendar, M.P.Sirisha, T.Ramakrishnaiah and N.Satyanarayana, “Study of Comparative Delay Analysis of Conventional Copper Interconnects and Cnt Interconnects,” National Conference on Nano Materials and Technologies, 2013,      pp. 79-86.
154 K Swathi and P L Deepthi, “An Efficient Role of Multicore Embedded Processors In Controlling And Monitoring Train Parameters,” World Conference on Applied Sciences, Engineering And Technology, 2013.
155 P L Deepthi and K Swathi, “Motion Compensation Algorithms for Radar Image Processing,” World Conference on Applied Sciences, Engineering and Technology, 2013.
156 Kodam Latha and M. Nanda Maharshi, “Design Of Adders Using Qca,” International Journal of Advances In Engineering and Technology, Volume 6, 2013, pp. 1750-1759.
157 K Swathi and P L Deepthi, “An Efficient Role of Multicore Embedded Processors In Controlling And Monitoring Train Parameters,” World Conference on Applied Sciences, Engineering And Technology, 2013.
158 M. Nagarjuna, V. Harini, A.  Vijaya Lakshmi and M. Ramanjaneyulu, “Efficient Multiternary Digit Adder Design in Cmos Technology,” National Conference On Nanomaterials and Technologies, 2013.
159 K Sridhar Reddy, Satish Kumar V, K Satish Reddy and Shaik Basha, “Implementation of Algorithms for Multichannel Digital Monitoring Receiver,” Journal of Electronics And Communication Engineering, 2013, pp. 19-23.
160 Sangeeta Singh and S. Sujana, “Asic Implementation of Reed Solomon Codec for Burst Error Detection and Correction,” International Journal of Engineering Research and Technology, 2013, pp. 1828-1832.
161 Sangeeta Singh, S. Sujana, I. Babu and K. Latha, “VLSI Implementation Of Parallel Crc Using Pipelining, Unfolding And Retiming,” Journal of Vlsi Signal and Processing, 2013, pp. 1-8.
162 Kodam Latha, M. Srilatha, K. Swathi and Sangeeta Singh, “Implementation of Pci Target Controller Interfacing with Asynchronous Sram,” Journal of Electronics and Communication Engineering, 2013, pp.32-36.
163 U.Madavaiah, “Industrial Expectations 0f the Recruiters in the Post Recession Period,” International Conference on 21st Century Learners-Learning Styles and Strategies,” 2013.
164 K.Srishar Reddy, J.Krishna Chaithanya, K.Sathish Reddy and Eliyaz Mohamood, “Dielectric Loss Tangent Effect on Radiation Characteristics of Patch Antenna,” International Journal of Applied Science and Engineering Research, 2013.
165 J.Krishna Chaithanya and Dr. T.Rama Shari, “Linear Feature Extraction for Satellite Images Using CNLS Algorithm,” International Journal of Image Processing and Vision Sciences, 2013, pp. 30-34.
166 M.Nagarjuna, S.Srinivas, H.Shravan Kumar and M.Veeraswamy, “Design of High Performance Soft Error Tolerance Latch for Nanoscale Cmos Technology,” National Conference on Nanomaterials and Technologies, 2013, pp. 69-77.
167 M.Nagarjuna, V.Harini, A.Vijaya Lakshmi and M.Ramanjaneyulu, “Efficient Multiternary Digit Adder Design in Cmos Technology,” National Conference on Nanomaterials and Technologies, 2013.
168 D.Shobha Rani, Md.Asif and P.Harika, “A SVC light based technique for power quality improvement for Grid connected wind energy system,” Journal of Electrical and Electronics Engineering, 2013.
169 Md.Asif, D.Shobha Rani, B.Ramu and P.Harika, “Fuzzy Logic Based Controller Effective Energy Management of Composite Energy Storage System Involving Battery and Ultra Capacitor in Microgrid,” Journal of Electrical and Electronics Engineering, 2013,         pp. 11-20.
170 Md.Asif, D.Shobha Rani, B.Ramu and P.Harika, “A Fuzzy Logic Controller Based Multi Functional Dynamic Voltage Restorer in Distribution System,” Journal of Electrical and Electronics Engineering, 2013, pp. 55-63.
171 B Ramu, K.Damodara Reddy, Md.Asif and P.Harika, “A Simulink Model for Damping Power System Oscillations using Fact Devices,” Journal of Electrical and Electronics Engineering, 2013, pp. 59-64.
172 H.S.Jain, “Approach and Strategies for Energy Security in India: Sampling Domestic Sector Dynamics,” The Institute of Engineers, 2013.
173 T.C.Srinivasa Rao, N.Srinivas and G.Sandeep, “Application of SVM Technique for Three Phase Three Leg Ac/Ac Converter Topology,” Journal of Electrical and Electronics Engineering, 2013.
174 D.Shobha Rani and K.Hanumantha Rao, “Fuzzy Based Power Control of a Hybrid Active Wind Generator for Distributed Power Generation,” Journal of Electrical and Electronics Engineering, 2013.
175 K.Hanumantha Rao and D.Shobha Rani, “Secondary Distribution for Grid Interconnected Nine-level Inverter using PV system,” Journal of Electrical and Electronics Engineering, 2013, pp. 01-10.
176 K.Hanumantha Rao and M.Hari Babu, “Improved Fuzzy Control Strategy for Power Quality in Distributed Generation’s Single Phase Inverters,” Journal of Electrical and Electronics Engineering, 2013, pp. 38-49.
177 T.C.Srinivasa Rao, N.Srinivas and G.Sandeep, “Application of SVM Technique for Three Phase Three Leg Ac/Ac Converter Topology,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering, Volume 1, 2013.
178 D.Shobha Rani and K.Hanumantha Rao, “Fuzzy based power control of a hybrid active wind generator for distributed power generation,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering, Volume 1, 2013.
179 K.Hanumantha Rao and D.Shobha Rani, “Secondary Distribution for Grid Interconnected Nine-level Inverter using PV system,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering, Volume 1, 2013, pp. 01-10.
180 K.Hanumantha Rao and M.Hari Babu, “Improved Fuzzy Control Strategy for Power Quality in Distributed Generation’s Single Phase Inverters,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering, 2013, Volume 1, pp. 38-49.
181 K.Kalyan Kumar, V.Sharath Babu, M.Hari Babu and R. Bhaskar “Performance comparison of SVC and SSSC with POD controller for Power System Stability,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering, 2013, Volume 6, pp. 28-37.
182 A.Rama Krishna, V.Sharath Babu, R.Bhaskar, N.Srinivas and K.Venkateswarlu, “Design of Cost Effective Independent Power System Using Renewables for Rural Villages,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering, 2013, Volume 6, pp.57-64.
183 K.Venkateswarlu, G.Sandeep, N.Srinivas, K.Damodar Reddy and A.Ramakrishna, “Speed Sensorless Sliding Mode Control of Induction Motor Using Simulink,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering, 2013, Volume 6, pp.50-56.
184 K.Damodara Reddy, K.Venkateswarlu, N.Srinivas and G. Sandeep, “Cascaded Multilevel Inverter Based Active Power Filters: A Survey of Controls,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering. Volume 1, 2013.
185 K.Kalyan Kumar, V.Sharath Babu, M.Hari Babu and R. Bhaskar, “Performance comparison of SVC and SSSC with POD controller for Power System Stability,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering, Volume 6, 2013, pp.28-37.
186 K.Venkateswarlu, G.Sandeep, N.Srinivas, K.Damodar Reddy and A Ramakrishna “Speed Sensorless Sliding Mode Control of Induction Motor Using Simulink,” International Organization of Scientific Research Journal of Electrical and Electronics Engineering. Volume 6, 2013, pp-50-56.
187 B.Mamatha and P.Sarah, “Effect of neodymium and zirconium substitution on ferroelectric, dielectric and piezoelectric properties of SrBi4Ti4O15,” Journal of Ferroelectrics,” 2013, pp.51-66.
188 Ch.Praveen Kumar, “Goodbye Textbook, Hello Ipad: Accelerating Effective Language Learning Strategies for English Language Learners,” International Journal of Scientific and Research Publications, Volume 3, 2013.
189 Ch.Praveen Kumar, “The Eclectic Method-Theory and Its Application to the Learning of English,” International Journal of Scientific and Research Publications, Volume 3, 2013.
190 Santosh Reddy K, Madhusudhan Reddy K and Chandra Sekhar B, “A Study of Slow Increasing Functions and their Applications to Some Sequences of Integers,” International Journal of Engineering Research & Technology, Volume 2, 2013.
191 S P Kishore and N V S L Narasimham, “Mixed integer Programming In IMRT Treatment Planning,” International Journal of Engineering Research and Technology, Volume 2, 2013
192 C.Venkatasubbaiah, V.Sreeharibabu, A.Jayanth Kumar and S.Chandralingam, “Study of Characterization of Intensity Modulated Fiber Optic Sensor,” International Journal of Innovative Research in Science, Engineering and Technology Volume 2, 2013
193 V Lakshmi Naryana, S P Kishore and K Santosh Reddy, “An Adaptive Design For Discrete Responses of Patients In Clinical Trials,” International Journal of Engineering Research & Technology, Volume 2, 2013, pp. 131-137,
194 S P Kishore and N V S L Narasimham, “Optimization Approaches in Radiation Treatment Planning,” International Journal of Engineering Sciences Research, Volume 4, 2013, pp. 872-874
195 S Shashi Devi, “Enhancement of dc ionic conductivity with particle size of dispersoid in XKNO3 – 1-X Ba(NO3)2,” International Journal of Scientific & Engineering Research, Volume 4, 2013.
S.No. PAPERS PUBLISHED
1
Narasimha Prasad L V, Prudhvi Kumar Reddy K and Naidu M M,  “Cloud Dynamics using Fall Velocity and Nucleation Geometry of Clouds,” International Conference of Chemical, Biological and Environmental Engineering, Volume 49, 2012, pp. 85-94.
2 H.Venkateswara Reddy and S.Viswanadha Raju, “Comparing N-Node Set Importance Representative Results with Node Importance Representative Results for Categorical Clustering: An Exploratory Study,” International Journal of Computer Engineering Science, Volume 2, Issue 8, 2012, pp. 1-15.
3 H.Venkateswara Reddy and S.Viswanadha Raju, “A Study in Employing Rough Set Based Approach for Clustering on Categorical Time-Evolving Data,” Journal of Computer Engineering, Volume 3, 2012, pp. 44-51.
4 R.Madana Mohana, K.Suresh and A.Rama Mohan Reddy, “Crime Analysis using Data Mining,” International Journal of Electrical, Electronics and Computing Technology, Volume 1, 2012.
5 R.Madana Mohana and K.Suresh, “Data Mining Application: Decision Tress for crime analysis,” National Conference on Trends in Information Technology, 2012.
6 R.Madana Mohana, K.Suresh and A.Rama Mohan Reddy, “Crime Analysis using Data Mining,” National Conference on Informatics, 2012.
7 S.Venu Gopal, “Peer to Peer Network Modeling using UML Concepts,” International Conference of Chemical, Biological and Environmental Engineering, Volume 9, 2012.
8 S.Venu Gopal, “UML Based Approach to Tea Coffee Machine,” ISTE Annual Convocation and National Conference, Volume 3, 2012.
9 Y.Indhu and T.Uma Maheswari, “Fractal Based Indexing of Homogeneous Data Streams,” International Journal of Computer Technology and Research, Volume 1, 2012.
10 N.N.Ramya Tulasi and Y.Indu, “Video Frame Retrieval using Effective Query Processing,” International Journal of Research in Computer and Communication technology, Volume 1, 2012.
11 R Nagarjuna Reddy and G S Prasad Reddy, “A Cloud Frame Work for Monitoring People Health,” Computer Science Engineering and Applications, 2012.
12 C Kishor Reddy, P R Anisha, K Srinivasulu Reddy and S Surender Reddy, “Third Party Data Protection Applied to Cloud and Xacmal Implementation in the Hadoop Environment with Sparql,” International Journal of Scientific Research, Volume 2, Issue 1, 2012.
13 Ch. Venkata Reddy, K Vijaya kumar, S V Prabhakar vattikuti and R V S S N Ravi Kumar,  “Preparation and Photoluminescence of Cr3+ doped β-BaB2O4 nano power by Co-precipitation method,” Elsevier Editorial System for Physica B, 2012.
14 GV S S Sharma, Ch Venkata Reddy, S V Prabhakar vattikuti, P Narayana Mirthy and  R V S S N Ravi Kumar, “Site determination and Spectroscopic Investigations of Fe3+ Doped Zn3(BO3)2 nano powers,” Opto Electronic and advanced materials rapid communications, 2012.
15 C Kishor Reddy, P R Anisha, T Vishnu Vardhan Reddy and S Surender Reddy, “Controlling of Data in the Cloud,” International Journal of Innovative Research and Development, Volume 1, 2012.
16 C Kishor Kumar Reddy, S K Lokesh Naik, S K Prasanth,  B Suresh Kumar, “Cloud Specific Issues and Vulnerabilities Solutions,” International Journal of Scientific and Engineering Research, Volume 3, 2012.
17 Mui Sekar V, K Venu Gopal Rao and N Sambasiva Rao, “Secure Message Transmission with Low Computation Cheatsec,” International Organization of Scientific Research, Volume 7, 2012.
18 M L Prasanthi, A Krishna Chaitanya and N Sambasiva Rao, “Detection of Outliers and Change Points in a Data Stream of Bio Informatics Data,” International Journal of Engineering Research and Technology, Volume 1, 2012.
19 Apparao R, Naga Padmaja, Krishna Chaitanya and C. Satya Kumar, “Collaborating Services of Dynamic Authentication in Service-Orientd Architecture Base Business Processes,” International Journal of Advanced Research in Computer Science, Volume 3, 2012.
20 Anvesh K, Govardhan Reddy, Balasubba Reddy D, and Venkateswrlu, “Improve Efficient Secured QOS and SQDF for Manets,” International Journal of Advances in Science and Technology, Volume 5, 2012.
21 K V Pradeep, Anvesh K, MLP Swetha Priya and C Lakshmi, “Level Channel Assignment Algorithm for Multichannel Wireless Mesh Network,” International Journal of Advances in Science and Technology, Volume 4, 2012.
22 Maheswari Losetti and Kanaka Raju Gariga, “An enhanced RSA algorithm for low Computational devices”, International Journal of Advance Research and Innovation, 2012.
23 G Venkatesh, N Sambasiva Rao and K Suresh “Routing Algorithms and Algorithms for Life Time Optimization in Complex Sensor Actuator Networks,” International Journal of Engineering Inventions, Volume 3, 2012.
24 Kamathan Hari Krishna and T Rama Rao, “An Efficient Radix-22 FFT for Fixed and Mobile WIMAX Communication Systems,” International Journal of Electronics and Communication Engineering and Technology, Volume 3, 2012
25 G.Kalyan chakravarthy, Nagarjuna.M and V.Ramakrishna, “A Novel Bus Encoding Scheme for Reducing Switching Activity in VlSI Interconnects,” International Journal of Computer Engineering and Applications, Volume 3, 2012.
26 T Rama Krishnaiah, Srinivasulu Tadisetty and M Asha Rani, “Text Extraction in Video Using discrete Wavelet Transforms,” International Conference on Innovation in Electronics and communication Engineering, 2012.
27 Prasanth BUV, C Padmini and S Rajender, “Design and Implementation of a floating Point ALU on a Stratix – III FPGA,” International Journal of Computer Application, Volume 55, 2012.
28 J Krishna Chaitanya and Dr T Rama Shri, “Feature Extraction of Satellite Images Using 2d Phase Congruency Measure,” International Conference on Innovation in Electronics and Communication Engineering, 2012.
29 Uday Kumar Naluguru, T Rama Sree, Venkat B Prasanth, “A Matlab Based Algorithm Design for New Structural Feature of Retinal Image Vasculature Pattern,” International Journal of Electronics and Communication Engineering, Volume 2, 2012.
30 Md.Asif,  D.Shobha Rani, T.C. Srinivasa Rao and K. Hanumantha, “A Simulink Model for Emergency Power System and Electricity Market using Green Energy Technology,” International Journal of Engineering and Technology, Volume 2, 2012.
31 T C Srinivasa Rao, D Shobha Rani, K Hanumantha Rao and Md Asif, “A New Topology for the Design and Control of Uninterruptible Power Supply by Using Z–Source Inverter,” International Journal of Electronic and Electrical Engineering, Volume 5, 2012.
32 M Rajendra Prasad, V Sharath, G Nagendra, K Damodara Reddy and V Sridhar, “Research Method of Optimize Logger for A Telecomm Application Running on Embedded System,” International Journal of Engineering Research and Development, Volume 1, 2012.
33 K Damodara Reddy and Varaprasad, “One Cycle Controlled Active Filtering Technology for Industrial Power System-A Matlab/Simulink Approach,” International Journal of Power Electronics and Energy, Volume 1, 2012.
34 Bhumaiah Jula, Md Asif and Krishna Enugala, “Simulation for Protection of Huge Hydro Generator from Short Circuit Faults,” International Journal of Engineering Research and Development, Volume 4, 2012.
35 N Srinivas, A Raghu Ram and Vara Prasad, “Design of Economic Autonomous Power System Using Renewable for Remote Villages,” International journals of Electrical Engineering and Technology, Volume 3, 2012.
36 Yesodha N and Kalyan Kumar K, “Comparative Analysis of Hysteresis and Ramp Type Current Controllers for Grid Connected VLSI,” International Journal of Advanced Research in Computer Science, Volume 3, 2012.
37 K Rajendra Prasad, S Radha Krishna Reddy, JBV Subrahmanyam, P K Sahoo and Ch Shashidar, “Modeling and Simulation of an Asynchronous Generator with AC/DC/AC Converter Fed RLC Series Circuit in an Isolated Power Generation System,” International journal for the Engineers and Technologists, 2012.
38 P Janaki Ramulu, Satish V Kailas and R Ganesh Narayanan, “Influence of Tool Rotation Speed and Feed Rate on the Forming Limit of Friction Stir Welded AA6061-T6 Sheets,” Journal of Mechanical Engineering Science, 2012.
39 P Janaki Ramulu, R Ganesh Narayanan, Satish V Kailas and Jaya Chandra Reddy, “Internal Defect and Process Parameter Analysis during Friction Stir Welding of AI 6061 Sheets,” International journal of Advanced Manufacturing Technology, 2012.
40 Perumalla Janaki Ramulu and R Ganesh Narayanan 2012, “Weld Zone Representation during the formability prediction of friction stir Welded Blanks with Dissimilar Thickness,” Journal of Materials Science and Engineering Technology, Volume 43, 2012, pp. 241-252.
41 P Janaki Ramulu, R Ganesh Narayanan, Satish V Kailas and Jayachandra Reddy, “Frmability Evaluation of FSW Blanks made of Aluminum Sheet: Influence of Welding Speed and Tool Rotation Speed,” Advanced materials research, Volume 410,              pp. 287-290.
42 P Janaki Ramulu, R Ganesh Narayanan and Satish V Kailas, “Influence of Weld Location and Orientation on the formability of friction stir welded sheets made of Ai 6061 alloy,” International Deep Drawing Research group, 2012, pp. 668-672.
43 V Sreehari Babu, C Venkatasubbaiah, A Jayanth Kumar and S Chandraingam, “Intensity Modulated Fiber Opptic Chemical Sensor,” International Conference on Fiber Optics and Photonics, 2012.
44 K Deepak and A V S S K Guptha, “Evaluation of Thermodynamic Properties of Ammonia water Mixture,” International Symposium on Recent Advances in Integrated Energy and Energy Conservation, 2012.
45 A Anusha and Dr P Govardhan, “Alpha rooting for Image Deburning,” Indian Journal of Research, Volume 2, 2012.
46 Ch Divya and Dr P.Govardhan, “Optimal Pricing for Mobile Video Streaming in 3G Wireless Packet Networks,” Indian Journal of Research, Volume 2, 2012.
47 Dr P. Nagaraju and S Sai Pranav, “Indian Bond Markets an Overview,” Journal of Indian Management, 2012.
48 Dr P.Nagaraju, “Retailing in India-Growth and Challenges,” International Conference on Socio Economic Strategies for inclusive growth, 2012.
49 Dr P Sarah, “Dielectric, ferroelectric, piezoelectric and impedance study of lead-free ceramic: SrBi4Ti3.975Zr0.025O15,” Journal of Advanced Dielectrics, 2012, pp. 1-9.
50 Dr P Sarah, “Dielectric, ferroelectric, and piezoelectric study of lead free Nanoceramic: SrBi4Ti4-xZrxO15 (x = 0.00, 0.025 and 0.05) at Materials Science,” OMICS Group Conferences, 2012, pp. 22-24.
51 Dr P Sarah, “Dielectric and Impedance Spectroscopic studies of SrBi4-xLaxTi4O15,” Advanced Materials Research, 2012, pp. 52-56.
52 Dr P. Sarah, “Environmental Friendly Nano materials for Piezoelectric Transducers-Synthesis and Electrical property Studies”, International Conference on Nano Technology and Functional Materials, 2012, pp. 4-7.
53 SM Jyothirmayee, “An Effective Pedagogical Tool to Enhance L2 Proficiency,” a paper is included in the book entitled Role of ICTs in English Language Teaching and Learning Observations and Ruminations, 2012.
54 S Sashi Devi, B L Aruna, S Narender Reddy and A Sadananda Chary, “Ionic Conductivity studies in Ba(NO3)2 – KNO3+ mixed Crystals,” Pelagia Research library, 2012.
55 K Madhusudhan Reddy and K Lakshmi Narayan, “A Prey Predator Model with An Alternative Food for the Predator and Optimal Harvesting of the Predator,” Journal of Engineering and Applied Sciences, Volume 7, 2012.
56 C H Demudu Naidu, S Pallam Setty, M James Stefen, S K Prasanth and CH Suresh “Steganography Detection using Functional Link Artificial Neural Networks,” International Journal of Computer Applications, Volume 47, 2012.
57 Angel Mary and N.Sambasiva Rao, “CPV: Open Source Software Survivability Analysis by Communication Pattern Validation Approach,” International Journal of Scientific Research, 2012.
58 N Srinivas and O V S R Varaprasad, “Design of economic autonomous power system using Renewables for remote villages,” International Journal of Electrical Engineering and Technology, Volume 3, 2012.
59 G.Kalyan chakravarthy, Nagarjuna. M and S.Rajendar, “Reduction of Soft Error Tolerance using ABMM,” International Conference on Innovation in Electronics and Communication Engineering, 2012.
60 G.Kalyan Chakravarthy, Nagarjuna.M and V.Ramakrishna, “A Novel Bus Encoding Scheme for Reducing Switching Activity in VLSI Interconnects,” International Journal of Computer Engineering and Applications, Volume 03, 2012.
61 Dr. P.Sarah, “Dielectric and Impedance Spectroscopic studies of SrBi4-xLaxTi4O15,” Journal of Advanced Materials Research, 2012, pp. 52-56.
62 Dr. P.Sarah, “Environmental Friendly Nano materials for Piezoelectric Transducers-Synthesis and Electrical property Studies,” International Conference on Nano Technology and Functional Materials,” 2012.
63 B.Venkatesh, V.Kamala and A.M.K. Prasad, “Variation of Beam Strength of Steel Gear for Marine Applications,” International journal of Research in Engineering and Applied Sciences, Volume 2, 2012, pp. 1494-1499.
64 SV Prabhakar Vattikuti and N.Sambashiva Rao, “Nano Diffractive Structure Developed on Sol-Gel TiO2 Thin Film for Sensors,” Advances in Mechanical Engineering, 2012,    pp 45-47.
65 SV Prabhakar Vattikuti, N.Sambashiva Rao, K.J.Ma and H.H.Chien, “Nano Pyramid Structure Developed via Water Based Sol-gel Method: Al2O3, SiO2,” Savior of Nano Science, Nano Engineering and Applications, 2012, pp. 29-31.
66 SV Prabhakar Vattikuti, N.Sambashiva Rao, G Naga Kumar Kakarla, K.J.Ma and H.H.Chien, “TiO2 Sol-gel Thin Film for Biosensors Application,” World Congress on Biotechnology, 2012.
67 SV Prabhakar Vattikuti, K.Mani Kumari, M. Suresh Kumar, N.Sambashiva Rao, K.J.Ma and H.H.Chien, “Plastic Flow and Related Wear Mechanism of CVD Ceramic Coatings,” International Journal of Nano materials, 2012, pp. 970-975.
68 B.Venkatesh, V.Kamala and A.M.K.Prasad, “Variation of beam strength of Aluminum alloy gear for Marine applications,” International Conference on Material Processing and Characterization, 2012, pp.404-408.
69 B.Venkatesh, V.Kamala and A.M.K. Prasad, “Variation of Beam Strength of Steel Gear for Marine Applications,” Souvenir of International Conference on Competitiveness and Innovativeness in Engineering, Management & Information Technology, 2012.
70 Prashanth B U V, C Padmini and S Rajendar, “Design and Implementation of a Floating Point ALU on a Stratix-Iii Fpga,” International Journal of Computer Applications, 2012, pp. 48-50.
71 G. Kalian Chakravarthy, Nagarjuna and S. Rajendar, “Reduction of Soft Error Tolerance using ABMM,” International Conference on Electronics and Communication Engineering, 2012.
72 K.Damodara Reddy and K.Kalyan Kumar, “MMC and EMMC based STATCOM,” International Journal of Computer applications, Volume 73, 2012.
73 Ms. D.Shobha Rani, “Obtaining a General Voronoi Diagrammatic Path for a Typical Task Planning Application Problem,” National conference on emerging Trends in Electrical Engineering and communications, 2012.
74 Ms. D.Shobha Rani, “Denavit-Hartenberg Algorithm for Jointed Arm Robots,” National conference on emerging Trends in Electrical Engineering and communications, 2012.
75 Ms. D.Shobha Rani, “A 2-pass DH Algorithm for Obtaining the Dynamic Motion of a Dynamical System,” National conference on emerging Trends in Electrical Engineering and communications, 2012.
76 R.Bhaskar, “An Efficient Hardware Algorithm for RSA Encryption System using Vedic Mathematics,” Elsevier: Procedia Engineering, Volume 30, pp. 124-128.
77 H.Venkateswara Reddy and B.Suresh Kumar, “Automated Video Surveillance System with SMS Alert,” International Journal of Engineering and Computer Science, Volume 1, 2012, pp. 164- 167.
78 D.Raman, N Shiva Sankar Reddy and Y Srinivasa Reddy, “Risk Assessment For Identifying Intrusion Detection Using DS-Evidence Theory In Manet,” International Journal of Computers Electrical and Advanced Communications Engineering, Volume 1, 2012.
79 C Kishor Kumar Reddy, P R Anisha, B Mounika and V Tejaswani, “Resolve Cloud Application Migration,” Volume 1, 2012, pp. 01-07.
80 C Kishor Kumar Reddy, M Venkateswarlu and P R Anisha, “Usage of Incremental Provider aided Distance Information System to Improve user Assignment from a Performance Perspectives for Content Delivery Networks,” Volume 3, 2012, pp. 1-6.
81 K Madhusudhan Reddy and K Lakshmi Narayan,  “A Prey-Predator Model with an alternative food for the Predator and Optimal Harvesting of the Predator,” Journal of Engineering and Applied Sciences, Volume 7, 2012.
82 S Shashi Devi, “Ac Conductivity and complex impedence analysis of Ba(NO3)2-KNO3 mixed crystals,” Scholars research journal, 2012.
83 S Shashi Devi, “A Phenomenological Hysteresis and enhanced Ionic conductivity of solid electrolyte Ba(NO3)2-KNO3 mixed crystals,” Pelagia Research Library, 2012.
84 Ch. Praveen Kumar, “Perfecting Persona,” Conference at Sultan Qaboos University, 2012.
85 Ch. Praveen Kumar, “Teaching Methods and Approaches” National seminar on Teaching Methodologies, 2012.
86 U. Madavaiah, “Training Professional Students in Soft Skills,” National Conference on English Language Teaching in India: Issues, Debates and Strategies, 2012.
S.No. PAPERS PUBLISHED
1 H.Venkateswara Reddy and S.Viswanadha Raju, “A Threshold for clustering Concept Drifting Categorical Data,” Elsevier: Procedia Engineering, 2011.
2 H.Venkateswara Reddy and S.Viswanadha Raju, “Our-NIR: Node Importance Representative for Clustering of Categorical Data,” International Journal of Computer Science and Technology, Volume 2, Issue 2, 2011, pp. 80-82.
3 H.Venkateswara Reddy and S.Viswanadha Raju, “POur-NIR: Modified Node Importance Representative for Clustering of Categorical Data,” International Journal of Computer Science and Information Security, Volume 9, 2011, pp.146-150.
4 Dr P.Nagaraju, “Biomass Energy- production growth in India,” Journal of Indian Management, 2011.
5 H.Venkateswara Reddy and S.Viswanadha Raju, “A Threshold for clustering Concept Drifting Categorical Data,” IEEE International Conference on Machine Learning and Computing, Volume 3, 2011, pp. 383-387.
6 H.Venkateswara Reddy and S.Viswanadha Raju, “Clustering of Concept Drift Categorical Data using Our-NIR Method,” International Journal of Computer Science and Electrical Engineering, Volume 3, 2011, pp.784-788.
7 R. Madana Mohana, K. Suresh and A. Rama Mohan Reddy, “Improved FCM algorithm for Clustering on Web Usage Mining,” International Journal of Computer Science Issues, Volume  8, Issue 1, 2011.
8 R.Madana Mohana, K.Suresh and A.Rama Mohan Reddy, “Improved FCM algorithm for Clustering the IRIS data,” International Journal on Computer Science and Engineering , Volume 3, Issue 1, 2011.
9 M Swathi, D. Murahari Reddy, E R Aruna and J Naga Malleswara Rao, “DDoS Attacks Monitoring the Application Layer with Popular Datasets,” International Journal of Computational Intelligence and Information Security, Volume 2, 2011.
10 K H K Sairaj and M H M Krishna Prasad, “FRI Miner: A Tool for Frequent Regular Item sets Mining,” International Journal of Advanced Research in Computer Science, Volume 2, 2011.
11 Aishwarya B, Bharani K, Kommidi Sravanthi and Jagannadha Naidu K, “Improvement of PSRR in Common Source Amplifiers,” International Journal of Environmental Science and Technology, Volume 6, Issue 1, 2011.
12 Apparao K, Srinivasa Rao P and Rajagopal K, “Study of Multiple Injections in (Homogeneous Charge compression Ignition) HCCI engine using Computational fluid dynamics,” Journal of Mechanical Engineering Research, Volume 3, 2011.
13 A Bala Krishna, G Ravi Chandra, G Bala Krishna and C Someswara Rao, “Fuzzy Approach to the Selection of Material Data in Concurrent Engineering Environment,” Scientific Research Engineering, Volume 3, 2011
14 Dr. P.Nagaraju, “Biomass Energy-Production and Growth in India,” Journal of Indian Management, 2011.
15 B. Mamatha, M. B. Suresh, A. R. James, M. Vithal and P.Sarah, “Synthesis and Electrical Properties of SrBi4Ti4O15 Piezoelectric Ceramics,” International Conference on Mechanical Behavior of Materials, 2011.
16 B. Mamatha, A. R. James and P. Sarah, “Electromechanical Properties of A-site (LiHo) Modified Strontium Bismuth Titanate (SrBi4Ti4O15) Piezoelectric Ceramics and Ferroelectrics,” International Conference on mechanical Behavior of Materials, 2011.
17 P.Sarah, “Electric Properties of Holmium substituted SrBi4Ti4O15 Ceramic for High Temperature applications,” International Conference on Mechanical Behavior of Materials, 2011.
18 P.Sarah, “Electrical and piezoelectric studies of SrBi3.98Dy0.02Ti4O15,” International Conference on Key Engineering Materials, International Conference on Key Engineering Materials, 2011.
19 P Sarah, “Electrical Properties of Holmium substituted SrBi4Ti4O15 Ceramic for High Temperature Piezoelectric Applications,” Elsevier: Procedia Engineering, 2011.
20 K.Hari Krishna Sairaj and Dr.MHM Krishna Prasad, “FRI Miner: A Tool for Frequent Regular Itemsets Mining,” International Journal of Applied Research in Computing, 2011.
21 Dr P.Sarah, “Electrical and piezoelectric study of SrBi3.98Dy0.02Ti4O15,” Advanced Materials Research, Volume 214, 2011, pp. 641-645.
22 Dr P.Sarah, “Electric Properties of Holmium substituted SrBi4Ti4O15 Ceramic for High Temperature applications,” International Conference on mechanical behavior of Materials, 2011.
23 Dr. P.Sarah, “Electrical and piezoelectric studies of SrBi3.98Dy0.02Ti4O15,” International Conference on Key Engineering Materials, 2011.
24 Dr P.Sarah, “Dielectric and Ferroelectric properties of lanthanum doped Srbi4ti4o15 Ferroelectric Ceramics,” IEEE International Vacuum Electronics Conference,                pp. 389-390.
25 B.Venkatesh, V. Kamala and A.M.K. Prasad, “Parametric Approach to Analysis of high Speed Helical Gear with 40 Ni2 Cr1 Mo28 Steel for Marine Applications,” International Journal of RES Engineeria, 2011.
26 B.Venkatesh, V.Kamala and A.M.K.Prasad, “Parametric Approach to Analysis of Aluminum alloy helical gear for High Speed Marine Applications,” International journal of Modern Engineering Research, Volume 1, Issue 1, 2011, pp. 173-178.
27 Uday Prakash Pethakamsetty and T. Ramakrishnaiah, “Bandwidth Utilization in Mobile Wimax Nerworks,” International Conference on Advanced Computing Methodologies, 2011, pp.92-96.
28 B.Prathibha Manoja and T.Ramakrishnaiah, “A Centralized Monitoring Scheme Using Load Matrix For Cellular Communications,” National Conference on Emerging Trends in Communications and Signal Processing, 2011.
29 Anupama Tammi, “Classification-Analysis of Anonymization for Privacy Data,” International Journal of Computational Intelligence and Information Security, Volume 2, 2011.
30 Swetha G and K Satyashree, “Large Led Display Design Using Arm 9,” International Journal of Computer Trends and Technology, 2011.
31 J Krishna Chaithanya and Dr T.Ramashri, “Feature Extraction Of Satellite Images Using Various Transforms,” National Conference On Emerging Trends In Communications & Signal Processing Techniques, 2011.
32 J.Krishna Chaithanya and Dr. T.Ramashri,  “Feature Extraction of Satellite Images and Noise Reduction Using Wavelet Transform,” International Journal of Engineering Research Applications , 2011
33 M.Veeraswamy, “Medical Radiographs Compression Using Neural Networks and Cosine Transform,” National Conference on Emerging Trends in Electronics & Communication Engineering, 2011.
34 H.S.Jain, “Characterization of PD behaviour in GIS by Acoustic Insulation Analyzer,” International Journal of Power and Energy Systems, Volume 31, 2011.
35 T.C.Srinivasa Rao, “Investigation of the Performance of Direct AC to AC Converter in High Frequency Industrial Applications,” International Journal of Engineering and Technology, Volume 1, Issue 2, 2011.
36 T.C.Srinivasa Rao, “Application of Vector Control Technique to AC Motors,” International Journal of Advances in Engineering Research. Volume 2, 2011.
37 T.C.Srinivasa Rao, “Auto Control of a Stand by transformer using Microcontroller,” International Journal of Advances in Engineering Research, Volume 2, 2011.
38 T.C.Srinivasa Rao, “Direct AC to AC Converter with Variable Frequency Sinusoidal Currents for Application to Grid Connected Wind Generators,” International Journal of Advances in Engineering Research, Volume 2, 2011.
39 N Sambasiva Rao, V Padmanabha Reddy and V.Muni Sekhar, “Education Reform System: A Virtualized Grid based Web for E-Learning,” International Journal of Electrical, Electronics and Computing Technology, Volume 1, 2011.
40 R.Madana Mohana, K.Suresh and A.Rama Mohan Reddy, “A Improved FCM Algorithm for Clustering on Web Usage Mining,” IEEE International conference on Computer and Management, 2011.
41 N Sujata Gupta, A Bhanu Prasad and B. Sailaja, “Novel Protocol Technique for Energy Efficient Routing Conservation in Wireless Ad-hoc Networks,” International Journal of Computational Intelligence and Information Security, Volume 2, 2011.
42 Nagavalli Susarla, B Deepthi, E R Aruna and B V Rama Krishna, “Clustering Analysis and Study on Deriving Concept Based User Profile fro Search Engine Logs,” International Journal of Computational Intelligence and Information Security, Volume 2, 2011,      pp. 62-68.
43 B Sushma, B V Ramakrishna, and V Munisekhar, “Analysis of Crash Recovery Failure Detection with Quality of Services,” International Journal of Computational Intelligence and Information Security Volume 2, 2011, pp. 93-97.
44
K Madhusudhan Reddy and K Lakshmi Narayan, “A Prey-Predator Model with an alternative food for the Predator and Optimal Harvesting of the Prey,” Advances in Applied Science Research, Volume 2, 2011, pp. 451-459.
45
SM Jyothirmayee, “English Music-An Effective Tool to Teach/Learn English Language,” Journal of Technology for ELT, Volume 1, 2011.
46 S M Jyothirmayee, “English Music-An Effective tool to teach/learn English Language,” National Conference on ELT, 2011.
S.No. PAPERS PUBLISHED
1 Perumalla Janaki Ramulu, NileshBondre and R Ganesh Narayanan, “Weld zone representation during the formability prediction of friction stir welded blanks with equal thickness,” Volume 2, 2010, pp. 989-994.
2 B.Venkatesh, V.Kamala and A.M.K.Prasad, “Parametric Study of Helical Gear with Aluminum Alloy for High Speed Marine Applications,” International Journal of Engineering Research and Technology, 2010.
3 B.Venkatesh, V.Kamala and AMKPrasad, “Modeling & Analysis of Aluminum A360 Alloy Helical Gear for Marine Applications,” International Journal of Applied Engineering Research, 2010.
4 B.Venkatesh, V.Kamala and A.M.K.Prasad, “Design, Modeling & Manufacturing of Helical Gear,” International journal of Applied Engineering Research, 2010.
5 B.Venkatesh, V.Kamala and A.M.K.Prasad “Parametric Study for High Speed Helical Gear for Marine Applications,” National Conference on Mechanical Engineering Emerging Trends, 2010, pp. 123-132.
6 B.Venkatesh, V.Kamala and A.M.K.Prasad “Design and Computer Aided Analysis of High Speed Helical Gear,” National conference on recent innovations in Technology, 2010.
7 B.SrinivasNaik, P.Janaki Ramulu and R.Ganesh Narayanan, “Application of a Few Necking Criteria in Predicting the forming limit of Unwelded and Tailor-welded blanks,” The Journal of Strain Analysis for Engineering Design, Volume 45, 2010, pp. 79-96.
8 Hsi-Hsin Chien, Kung-Jeng Ma, SV Prabhakar Vattikuti, Chien-Huang Kuo, Cheng-Bang Huo and Choung-Lii Chao, “Tribological behaviour of MoS2/Au coatings,” Journal of Thin Solid Films, 2010, pp. 7532-7534.
9 Hsi Hsin Chien, Kung Jeng Ma, Yun Peng Yeh, SV. Prabhakar Vattikuti, Chien Hung Kuo and Choung Lii Chao, “Plastic Flow and Related Wear Mechanisms of CVD TiC Coatings, Advanced Materials Research, 2010, pp. 56-62.
10 K.Deepak, “Kalina Absorption Power Cycle Application as Bottoming Cycle in Low Grade Heat Recovery Systems,” International Symposium on Mechanical Engineering Emerging Trends, 2010.
11 V.Mahdhar Reddy and CNV Sreedhar, “A Proposal Vendor Selection in the context of   E-Manufacturing using Clustered Hierarchical TOPSIS using ROC Algorithm,” 2010.
12 J.V.R.Ravindra and M.B.Srinivas, “Performance Modeling of High Speed Vlsi Interconnects,” In Proceedings of Asia Pacific Conference on Postgraduate Research In Microelectronics And Electronics, 2010.
13 Murali Prasad R and Dr Satish Kumar P, “An Adaptive Power Efficient Pocket Scheduling Algorithm For Wimax Networks,” International Journal Of Computer Science And Information Security, 2010, pp. 295-300.
14 Murali Prasad R and Dr Satish Kumar P, “Resource Allocation- Wimax Systems,” Modern Applied Science, 2010, pp.140-150.
15 Anees Pasha and S Rajendar, “Improved Frequency Domain Receiver Algorithm for Lte Sc Fdma Based Uplink Mimo System,” National Conference On Signal Processing And Communications, 2010.
16 S.Srinivas, N. Uma Maheshwar Rao and S. Rajendar, “Fpga Implementation of Matched Filter Based Dsss Digital Gps Signal Receiver” National Conference on Recent Trends In Communication Technologies And Vlsi Design, 2010.
17 S Rajendar, Y Rajasekhar Reddy and B K Madhavi,  “Analysis Of Cmos Steady State Non-Ideal Electrical Behavior Of Coupled Vlsi Interconnects,” National Conference On Recent Trends In Communication Technologies and Vlsi Design, Hyderabad, 2010.
18 A Vijaya Lakshmi and V Sri Lakshmi Sowmya, “Adaptive Code Allocation For Interference Management In Cdma Systems,” International Conference on Aerospace Electronics, Communication and Instrumentation, 2010.
19 A Vijaya Lakshmi, M Gopi Krishna, “Code Allocation For Interference Reduction In Wireless Systems,” National Conference On Signal Processing And Communication Systems, 2010.
20 B.SrinivasNaik, P.Janaki Ramulu and R.Ganesh Narayanan, “Application of a Few Necking Criteria in Predicting the Forming Limit of Unwelded and Tailor-Welded Blanks,” The Journal of Strain Analysis for Engineering Design, 2010, pp. 79-96.
21 V Padmanabha Reddy and V Muni Sekhar, “Trust – Based Routing Protocol for MANET,” National Conference on Emerging Trends in Computing, 2010.
22 Vishwanath Pradeep B, Tejaswini K, Jyothsna K, Shylaja S, Naren R and Giridhar Reddy P, “Anti Proliferative effects of Tridax Procumbens on Prostate Cancer Cell Lines,” International journal of biological Science, 2010, pp. 203-209.
23 Ch.Praveen Kumar, “Learning and Training: Computer aided learning strategies,” Ibri Vocational Training Center, 2010.
24 S M Jyothirmayee, “Enhancing Communication Skills through Mini Projects in Engineering Education with the Help of Audio-Visual Aids-A Study,” National Seminar on Teaching of General and Technical English, 2010.
25 S M Jyothirmayee, “Multimedia Based Activities/Mini projects for Developing English- Language Communication Skills in the Students of Professional Courses,” International Congress on English Grammar, 2010.
S.No. PAPERS PUBLISHED
1 Perumalla Janaki Ramulu and R Ganesh Narayanan, “Forming limit prediction of friction stir welded blanks,” International Congress on Computational Mechanics and Simulation, 2009, pp. 233-234.
2 Perumalla Janaki Ramulu and R Ganesh Narayanan, “Representing weld zone during friction stir welded blank formability prediction,” International Congress on Computational Mechanics and Simulation 2009, pp. 231-232.
3 Hsi-Hsin Chien, Kung-Jeng Ma, SV Prabhakar. Vattikuti, Chien-Huang Kuo, Cheng-Bang Huo and Choung-Lii Cha, “Thermal Stability of Al2O3 Coated Low Transition Temperature Glass,” DSL, 2009, pp 123-127.
4 Appa Rao.K, Srinivasa Rao.P, RajaGopal.K and Subbaiah G.V, “Modelling of Homogeneous Charge Compression Ignition Engines,” International Conference on Computational Methods in Engineering and Sciences, 2009.
S.No. PAPERS PUBLISHED
1 Perumalla Janaki Ramulu, D. V. Ravi Shankar, C. V. S. Pavan Kumar Rao and S K Salman Jani, “The Effect of Retained Austenite on Fracture Toughness of EN-19 Steel Subjected to Thermo Mechanical Treatments,” International Conference on Emerging Technologies and Applications in Engineering, Technology and Sciences, 2008,             pp. 1851-1855.
2 Perumalla Janaki Ramulu, D. V. Ravi Shankar, C. V. S. Pavan Kumar Rao and S K Salman Jani, “An Investigation and co-relating the Effect of Retained Austenite on Impact Properties of EN-19 Steel Subjected to Thermo Mechanical Treatments,” International Conference on Emerging Technologies and Applications in Engineering, Technology and Sciences, 2008, pp. 1134-1136.
3 Srinivasa Rao.P and Rajagopal.K, “A CFD Analysis on Stratified Scavenging System with EGR in two Stroke Internal Combustion Engines,” International Journal of Computational and Applied Mathematics, Volume 112, 2008.
4 Srinivasa Rao.P and Rajagopal.K, “A CFD analysis on stratified scavenging system of medium capacity two stroke Internal Combustion Engines,” Journal of Thermal Science, Volume 12, 2008, pp.33-42.
5 B Rizwana, T.Radhakrishna and P.Sarah, “AC Conductivity and Dielectric Studies on Sr0.6Na0.2 Nd0.2Bi4Ti4O15 Ceramic,” Modern Physics Letters, 2008.
6 S M Jyothirmayee, “Task Based Activities for Developing L2 Proficiency in the Students of ESL,” National Conference on English to Excel, 2008, pp.94-103.
7 B Abhishek and S Rajendar, “Modified Glitch Free Adiabatic Circuit Design Approach for Low Power Applications,” National Conference on Signal Processing And Embedded Systems Applications, 2008, pp. 552-559.
8 K J Arvind Chary and S Rajendar, “Schmitt Trigger Insertion for High Performance and Low Power VLSI Interconnects,” National Conference on Signal Processing and Embedded Systems Applications, 2008, pp.499-505.
9 Satish Kumar V, Sridhar Reddy K, Maheswara Reddy K and Ashok Kumar K,  “Design Approach of Throughput Improvement for Cellular Network,” IEEE International Conference on Devices, Circuits And Systems, 2008.
10 Satish Kumar V, Jyothy A, Sridhar Reddy K and Maheswara Reddy, “Design Approach of Intercellular Interference Management for Future Mobile Communications,” IEEE International Conference on Computational Intelligence and Computing Research, 2008.
11 J.Krishna Chaithanya and Dr. T.Ramashri, “Feature Extraction of Satellite Images Using 2D Phase Congruency Measure,” International Conference on Innovation in Electronics And Communication Engineering, 2008, pp. 125-130.
12 M Devadas and K Latha, “Design of High Performance On-Chip Bus OCP-IP Protocol with Advanced Bus Functionalities,” International Journal of Advances in Electronics Engineering, 2008, pp. 253-258.
13 T.C.Srinivasa Rao, D.Shobha Rani and N.Srinivas, “Photo Voltaic power Converter as an Input source for SEPIC Converter,” International Journal of Computer applications, Volume 78, 2008.
14 T.C.Srinivasa Rao and N.Srinivas, “Frequency error and voltage control by using PI and Fuzzy logic Controllers for multi area connected power systems,” International Journal of Computer applications, Volume 77, 2008.
15 R.Bhaskar, A.Ramakrishna, K.Venkateshwarlu and M.Hari Babu, “A Novel Architecture for an efficient data encryption system,” International Journal of Scientific Engineering and Technology, Volume 2, 2008, pp. 488-491.
16 Santosh Reddy K, Kavitha V and Lakshmi Narayana V, “Slow Increasing Functions and their Applications to some Problems in Number Theory,” Journal of Engineering and Applied Sciences, Volume 8, 2008.
17 Srinivasa Rao P and Rajagopal K, “Stratified Scavenging System for Higher CC engine using CFD,” International Journal of Computations and Applied Mathematics, 2008.
18 G. Harshini, K. Ranjitha Pragnya, J. Krishna Chaithanya and Dr. T. Ramashri, “Image Segmentation of Multi- Focused Images Using Watershed Algorithm,” International Journal of Current Engineering and Technology, 2008.
19 J. Krishna Chaithanya, Babu I, Shaik Basha and Dr.T. Ramashri, “Performance Of Phase Congruency and Linear Feature Extraction For Satellite Images Using Smoothing Algorithm,” Journal of Computer Engineering, Volume 2, 2008.
20 Shaik Basha, K. Sridhar Reddy, J.Krishna Chaithanya and B. U. V Prashanth, “Feature Extraction Based Estimation Of Rain Fall By Cross Correlation Cloud RADAR Data,” Journal of Computer Engineering, Volume 6, 2008.
21 K Sruthi Divya and S Rajendar, “VLSI Implementation of Parallel And Asynchronous Decoder For Wireless Communication Applications,” National Conference on Signal Processing and Embedded Systems Applications, 2008, pp. 323-330.
22 Priyanka and S Rajendar, “Design and Implementation of Digital Down Converter for Software Defined Radio,” National Conference on Signal Processing and Embedded Systems Applications, 2008.
S.No. PAPERS PUBLISHED
1 Prof. L V Narasimha Prasad, “Recruitment and Selection,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13 No: 978-93-80831-16-9.
2 Prof. L V Narasimha Prasad, “Computer Programming in C,” Spectrum Techno Press, Banglore, ISBN-13 No: 978-81-927086-0-6.
3 Prof. L V Narasimha Prasad and Prof M M Naidu “Design and Analysis of Algorithms,” Spectrum Techno Press, Banglore, ISBN-13 No: 978-81-927086-4-5.
4 Prof. L V Narasimha Prasad “Data Structures through C,” Spectrum Techno Press, Banglore, ISBN-13 No: 978-81-927086-1-4.
5 R Madana Mohana and Prof S Viswanadha Raju, “Computational Techniques,” Spectrum Techno Press, Banglore, ISBN-13 No: 978-81-927086-2-1.
6 R Madana Mohana and E R Aruna, “Discreate Mathematical Structures,“ Spectrum Techno Press, Banglore,  ISBN-13 No:978-81-927086-3-8.
7 R Madana Mohana & Prof A Rama Mohan Reddy, “Information Technology for Managers,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13, No: 978-93-80831-39-8.
8 S Sujana, “Personality Development,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13 No: 978-93-80831-40-4.
9 S Sujana, “Interpersonal Skills and Team Building,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13 No: 978-81-909982-8-4.
10 S Sujana, “Training and Development,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13 No: 978-93-80831-22-0.
11 Dr R Venu Gopal and S Sujana, “Mechanics and Waves and Oscillations,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13 No: 978-93-80831-60-2.
12 S Sujana, “Electricity, Magnetism and Electronics,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13 No: 978-93-80831-61-9.
13 M Dhamodhar Naidu and S Sujana, “Modern Physics,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13 No: 978-93-80831-62-6.
14 Dr P Subramanyam and S Sujana, “Thermo Dynamics and Optics,” Students Helpline Publishing House (P) Ltd., Hyderabad, ISBN-13 No: 978-93-80831-63-3.